Effect of the bonding layer and multigrading layers on the performance of a wafer-bonded InGaAs/Si single-photon detector.

A wafer-bonded InGaAs/Si avalanche photodiode (APD) at a wavelength of 1550 nm was theoretically simulated. We focused on the effect of the I n 1-x G a x A s multigrading layers and bonding layers on the electric fields, electron and hole concentrations, recombination rates, and energy bands. In this work, I n 1-x G a x A s multigrading layers inserted between Si and InGaAs were adopted to reduce the discontinuity of the conduction band between Si and InGaAs. A bonding layer was introduced at the InGaAs/Si interface to isolate the mismatched lattices to achieve a high-quality InGaAs film. In addition, the bonding layer can further regulate the electric field distribution in the absorption and multiplication layers. The wafer-bonded InGaAs/Si APD, structured by a polycrystalline silicon (poly-Si) bonding layer and I n 1-x G a x A s multigrading layers (x changes from 0.5 to 0.85), displayed the highest gain-bandwidth product (GBP). When the APD operates in Geiger mode, the single-photon detection efficiency (SPDE) of the photodiode is 20%, and the dark count rate (DCR) is 1 MHz at 300 K. Moreover, one finds that the DCR is lower than 1 kHz at 200 K. These results indicate that high-performance InGaAs/Si SPAD can be achieved through a wafer-bonded platform.

Two Putative Pheromone Receptors, but Not Their Cognate Pheromones, Regulate Female Fertility in the Atypical Mating Fungus Colletotrichum fructicola.

Colletotrichum fungi are a group of damaging phytopathogens with atypical mating type loci (harboring only MAT1-2-1 but not MAT1-1-1) and complex sexual behaviors. Sex pheromones and their cognate G-protein-coupled receptors are conserved regulators of fungal mating. These genes, however, lose function frequently among Colletotrichum species, indicating a possibility that pheromone signaling is dispensable for Colletotrichum sexual reproduction. We have identified two putative pheromone-receptor pairs (PPG1:PRE2, PPG2:PRE1) in C. fructicola, a species that exhibits plus-to-minus mating type switching and plus-minus-mediated mating line development. Here, we report the generation and characterization of gene-deletion mutants for all four genes in both plus and minus strain backgrounds. Single-gene deletion of pre1 or pre2 had no effect on sexual development, whereas their double deletion caused self-sterility in both the plus and minus strains. Moreover, double deletion of pre1 and pre2 caused female sterility in plus-minus outcrossing. Double deletion of pre1 and pre2, however, did not inhibit perithecial differentiation or plus-minus-mediated enhancement of perithecial differentiation. Contrary to the results with pre1 and pre2, double deletion of ppg1 and ppg2 had no effect on sexual compatibility, development, or fecundity. We concluded that pre1 and pre2 coordinately regulate C. fructicola mating by recognizing novel signal molecule(s) distinct from canonical Ascomycota pheromones. The contrasting importance between pheromone receptors and their cognate pheromones highlights the complicated nature of sex regulation in Colletotrichum fungi.

1,8-Dihydroxynaphthalene Melanin Biosynthesis in Colletotrichum fructicola Is Developmentally Regulated and Requires the Cooperative Function of Two Putative Zinc Finger Transcription Factors.

In ascomycetes, 1,8-dihydroxynaphthalene (DHN) melanin plays important protective functions and its production is usually coupled with development and environmental stress responses. The regulation of melanin biosynthesis, however, remains obscure. Colletotrichum fructicola is a phytopathogen with a broad host range that produces melanized appressoria and perithecia. In this study, we annotated melanin genes in a high-quality C. fructicola genome and characterized two zinc finger transcription factors (TFs) (cmr1 and cmr2) that form a loosely organized gene cluster with several melanin biosynthesis genes. Deleting either TF abolished melanization in both mycelia and perithecia but did not affect appressoria. The deletion mutants also showed perithecial development defects. Overexpressing cmr1 in Δcmr2 strongly activated the expression of melanin biosynthesis genes including pks1, scd1, t4hr1, and thr1 and caused hyper-accumulation of charcoal to black pigment(s). On the other hand, overexpressing cmr2 in Δcmr1 activated pks1, t4hr1, and thr1, but not scd1. We conclude that proper DHN melanin accumulation in C. fructicola requires the cooperative function of two in-cluster TFs that also regulate perithecial development. The study clarifies DHN melanin regulations in C. fructicola and expands the function of melanin in-cluster TFs to sex regulation.

Molecular Dissection of Perithecial Mating Line Development in Colletotrichum fructicola, a Species with a Nontypical Mating System Featuring Plus-to-Minus Switch and Plus-Minus-Mediated Sexual Enhancement.

The genetic regulation of Colletotrichum (Glomerella) sexual reproduction does not strictly adhere to the Ascomycota paradigm and remains poorly understood. Morphologically different but sexually compatible strain types, termed plus and minus, have been recognized, but the biological and molecular distinctions between these strain types remain elusive. In this study, we characterized the sexual behaviors of a pair of plus and minus strains of C. fructicola with the aid of live-cell nucleus-localized fluorescent protein labeling, gene expression, and gene mutation analyses. We confirmed a genetically stable plus-to-minus switching phenomenon and demonstrated the presence of both cross-fertilized and self-fertilized perithecia within the mating line (perithecia cluster at the line of colony contact) between plus and minus strains. We demonstrated that pheromone signaling genes (a-factor-like and α-factor-like pheromones and their corresponding GPCR receptors) were differently expressed between vegetative hyphae of the two strains. Moreover, deletion of pmk1 (a FUS/KSS1 mitogen-activate protein kinase) in the minus strain severely limited mating line formation, whereas deletion of a GPCR (FGSG_05239 homolog) and two histone modification factors (hos2, snt2) in the minus strain did not affect mating line development but altered the ratio between cross-fertilization and self-fertilization within the mating line. We propose a model in which mating line formation in C. fructicola involves enhanced protoperithecium differentiation and enhanced perithecium maturation of the minus strain mediated by both cross-fertilization and diffusive effectors. This study provides insights into mechanisms underlying the mysterious phenomenon of plus-minus-mediated sexual enhancement being unique to Colletotrichum fungi. IMPORTANCE Plus-minus regulation of Colletotrichum sexual differentiation was reported in the early 1900s. Both plus and minus strains produce fertile perithecia in a homothallic but inefficient manner. However, when the two strain types encounter each other, efficient differentiation of fertile perithecia is triggered. The plus strain, by itself, can also generate minus ascospore progeny at high frequency. This nontypical mating system facilitates sexual reproduction and is Colletotrichum specific; the underlying molecular mechanisms, however, remain elusive. The current study revisits this longstanding mystery using C. fructicola as an experimental system. The presence of both cross-fertilized and self-fertilized perithecia within the mating line was directly evidenced by live-cell imaging with fluorescent markers. Based on further gene expression and gene mutation analysis, a model explaining mating line development (plus-minus-mediated sexual enhancement) is proposed. Data reported here have the potential to allow us to better understand Colletotrichum mating and filamentous ascomycete sexual regulation.

Programmable and Self-Healing Light-Driven Actuators through Synergetic Use of Water-Shaping and -Welding Methods.

Shape programming is critical for the fabrication of a light-driven actuator with complex shape morphing, which demonstrates potential applications in remote-controlled light-driven soft robots. However, it remains a huge challenge to obtain light-driven actuators having advantages of complex shape morphing, self-healing function, and facile fabrication simultaneously. Here, we report a facile strategy to obtain programmable and self-healing light-driven actuators with complex shape morphing. Various initial shapes of actuators can be programmed by synergetic use of water-shaping and -welding methods, which provides unlimited opportunities for fabricating actuators with predesigned shapes and subsequently demonstrating complex shape morphing. A template transfer method is used to prepare a single-layer graphene oxide (GO) film with asymmetric surface structures, which acts as the basic actuator and has the self-healing function based on the hydrophilic property of GO. It shows bending morphing under near-infrared (NIR) light irradiation due to the photothermal effect and asymmetric morphology on the opposite surfaces. Four more types of actuators are programmed from the basic actuator through the water-shaping method, which exhibits bending, unbending, twisting, and untwisting, respectively, under NIR light illumination. In addition, an S-shape actuator and a flower-shape actuator are programmed from the basic actuators through the water-welding method. By simply turning over the S-shape actuator, it can perform a bidirectional crawling motion. Finally, two intricate bionic light-driven actuators (tendril-shape and octopus-shape) are constructed, which are unattainable from conventional fabrication methods of actuators. We believe that this study will unlock a new way to programmable, self-healing, and light-driven soft robots with tunable and complex shape morphing.

Humidity- and light-driven actuators based on carbon nanotube-coated paper and polymer composite.

Multi-responsive actuators driven by different stimuli (e.g. light, humidity, electricity) have attracted intense attention recently for the advantages of being used in various environments and show enormous actuation. In this work, we propose humidity- and light-driven actuators based on carbon nanotube (CNT)-coated paper and a biaxially oriented polypropylene (BOPP) composite. The CNT-paper/BOPP actuator shows large bending actuation when driven by humidity change (curvature of 1.2 cm-1) and near infrared (NIR) light irradiation (curvature up to 1.6 cm-1). The great actuation performances outperform most other paper-based actuators. Finally, a smart gripper, of which the initial opening width can be enlarged, is fabricated on the basis of the CNT-paper/BOPP actuators. By utilizing the bidirectional bending motion of the actuator, the opening width of the gripper can increase to a width that is 4 times larger than its initial width, so as to grasp a large object. The gripper is also able to raise and move an object that is 20 times heavier than one actuator of the gripper. We assume that this new type of actuator has great potential in artificial muscle, soft robotics and biomimetic applications.