Predictive values of ultrasonic diaphragm thickening fraction combined with integrative weaning index in weaning patients with mechanical ventilation: a retrospective study.

OBJECTIVE: We aimed to explore the predictive values of ultrasonic diaphragm thickening fraction (DTF) combined with integrative weaning index (IWI) in weaning patients with mechanical ventilation. METHODS: Patients with mechanical ventilation who received oral endotracheal intubation from September 2020 to September 2021 were included in this retrospective study. Before the start of the spontaneous breathing test (SBT), IWI was calculated according to the blood gas analysis parameters and parameters read in volume control mode. After the start of SBT, DTF was calculated according to the end-expiratory thickness and end-inspiratory thickness of the right diaphragm. The receiver operating curve (ROC) was used to evaluate the predictive value of DTF and IWI for successful weaning, and the sensitivity and specificity were calculated according to the best critical value. RESULTS: The sensitivity, specificity, and best cutoff value of DTF to predict successful weaning was 0.772, 0.727, and 0.293, respectively, and the area under the curve (AUC) was 0.72 (95%CI 0.59-0.86, p = 0.003). The sensitivity, specificity, and best cutoff value of IWI to predict successful weaning was 0.614, 0.909, 53.00, respectively, and AUC was 0.82 (95%CI 0.72-0.91, p < 0.001). The sensitivity, specificity, and best cutoff value of the combination of DTF and IWI to predict successful weaning was 0.614, 0.909, 17.848, respectively, and AUC was 0.84 (95%CI 0.75-0.93, p < 0.001). CONCLUSION: DTF and IWI can guide the selection of weaning, while DTF combined with IWI can improve the effect of weaning prediction and provide support for patients' weaning safety.

Identification of Key Modules and Candidate Genes for Powdery Mildew Resistance of Wheat-Agropyron cristatum Translocation Line WAT-2020-17-6 by WGCNA

As one of the serious diseases of wheat, powdery mildew (Blumeria graminis f. sp. tritici) is a long-term threat to wheat production. Therefore, it is of great significance to explore new powdery mildew-resistant genes for breeding. The wild relative species of wheat provide gene resources for resistance to powdery mildew breeding. Agropyron cristatum (2n = 4x = 28, genomes PPPP) is an important wild relative of wheat, carrying excellent genes for high yield, disease resistance, and stress resistance, which can be used for wheat improvement. To understand the molecular mechanism of powdery mildew resistance in the wheat-A. cristatum translocation line WAT2020-17-6, transcriptome sequencing was performed, and the resistance genes were analyzed by weighted gene co-expression network analysis (WGCNA). In the results, 42,845 differentially expressed genes were identified and divided into 18 modules, of which six modules were highly correlated with powdery mildew resistance. Gene ontology (GO) enrichment analysis showed that the six interested modules related to powdery mildew resistance were significantly enriched in N-methyltransferase activity, autophagy, mRNA splicing via spliceosome, chloroplast envelope, and AMP binding. The candidate hub genes of the interested modules were further identified, and their regulatory relationships were analyzed based on co-expression data. The temporal expression pattern of the 12 hub genes was verified within 96 h after powdery mildew inoculation by RT-PCR assay. In this study, we preliminarily explained the resistance mechanism of the wheat-A. cristatum translocation lines and obtained the hub candidate genes, which laid a foundation in the exploration of resistance genes in A. cristatum for powdery mildew-resistant breeding in wheat.

Mussel-inspired PDA-based MIP-SERS sensor for the detection of trace MG in environmental water.

The abuse of antibiotics such as malachite green (MG) has caused its residues in foods and environmental water, and therefore, it is important to establish a rapid and reliable method for sensitive detection of antibiotics. In this work, a novel molecularly imprinted polymer surface-enhanced Raman spectroscopy (SERS) sensor integrating high sensitivity, selectivity, and reusability is fabricated for the detection of trace MG in environmental water. SiO2@Au, by adjusting the gap between nanoparticles, provides SERS activity, and then the template MG is molecularly imprinted and wrapped by oxidative self-polymerization properties of dopamine (SA-100@MIP). The prepared SA-100@MIP achieved sensitive and selective detection of MG in pond water (0.1 nM) and presented a good linear correlation in the range of 10-6-10-10 M. Moreover, the substrate still has excellent SERS performance after 12 times of repeated use. These properties indicate that this sensor may provide broad prospects for the practical application of SERS in food and environmental monitoring.

Development and identification of an elite wheat-Hordeum californicum T6HcS/6BL translocation line ND646 containing several desirable traits.

Hordeum californicum (H. californicum, 2n=2X=14, HcHc), one of the wild relatives of wheat (Triticum aestivum L.), harbors many desirable genes and is a potential genetic resource for wheat improvement. In this study, an elite line ND646 was selected from a BC4F5 population, which was developed using 60Co-γ irradiated wheat-H. californicum disomic addition line WJ28-1 (DA6Hc) as the donor parent and Ningchun 4 as the recurrent parent. ND646 was identified as a novel wheat-H. californicum 6HcS/6BL translocation line using genomic in situ hybridization (GISH), fluorescence in situ hybridization (FISH), and H. californicum-specific expressed sequence tag (EST) markers. Further evaluation revealed that ND646 had excellent performance in several traits, such as a higher sedimentation value (SV), higher water absorption rate (WAR), and higher hardness index (HI). More importantly, it had more kernels per spike (KPS), a higher grain yields (GY), and good resistance to powdery mildew, leaf rust, and 2,4-D butylate (2,4-D). Its excellent phenotypic performance laid the foundation for further investigation of its genetic architecture and makes ND646 a useful germplasm resource for wheat breeding.

Genome-wide identification of the jumonji C domain- containing histone demethylase gene family in wheat and their expression analysis under drought stress.

Methylation and demethylation of histone play a crucial role in regulating chromatin formation and gene expression. The jumonji C (JmjC) domain-containing proteins are demethylases that are involved in regulating epigenetic modification in plants. In our study, the JmjC genes in Triticum aestivum L., Triticum turgidum L., Triticum dicoccoides L., Triticum urartu L., and Aegilops tauschii L. were identified. Phylogenetic relationship and colinearity analysis revealed that the wheat JmjC genes were conserved in A, B, and D subgenomes during evolution. Cis-acting elements analysis showed that elements related to stress response, hormone response, and light response were found in wheat JmjC genes. The expression of JmjC genes was affected by tissue types and developmental stages, and members of the same subfamily tended to have similar expression patterns in wheat. They also showed a unique expression pattern in root during PEG (Polyethylene glycol) treatment. In conclusion, comprehensive analysis indicated that three members (Tr-1A-JMJ2, Tr-1B-JMJ2, and Tr-1D-JMJ2) might be regulated by several hormones and function in the early stages of drought stress, while eight members (Tr-1B-JMJ3, Tr-4B-JMJ1, Tr-7A-JMJ1, etc.) displayed a significantly high expression after 24 h of PEG treatment, indicating a role in the later stages of drought stress. This research presents the first genome-wide study of the JmjC family in wheat, and lays the foundation for promoting the study of their functional characterization in wheat drought resistance.

Enhanced Photoelectrochemical Water Splitting of Black Silicon Photoanode with pH-Dependent Copper-Bipyridine Catalysts.

Since the water oxidation half-reaction requires the transfer of multi-electrons and the formation of O-O bond, it's crucial to investigate the catalytic behaviours of semiconductor photoanodes. In this work, a bio-inspired copper-bipyridine catalyst of Cu(dcbpy) is decorated on the nanoporous Si photoanode (black Si, b-Si). Under AM1.5G illumination, the b-Si/Cu(dcbpy) photoanode exhibits a high photocurrent density of 6.31 mA cm-2 at 1.5 VRHE at pH 11.0, which is dramatically improved from the b-Si photoanode (1.03 mA cm-2 ) and f-Si photoanode (0.0087 mA cm-2 ). Mechanism studies demonstrate that b-Si/Cu(dcbpy) has improved light-harvesting, interfacial charge-transfer, and surface area for water splitting. More interestingly, b-Si/Cu(dcbpy) exhibits a pH-dependent water oxidation behaviour with a minimum Tafel slope of 241 mV/dec and the lowest overpotential of 0.19 V at pH 11.0, which is due to the monomer/dimer equilibrium of copper catalyst. At pH ∼11, the formation of dimeric hydroxyl-complex could form O-O bond through a redox isomerization (RI) mechanism, which decreases the required potential for water oxidation. This in-depth understanding of pH-dependent water oxidation catalyst brings insights into the design of dimer water oxidation catalysts and efficient photoanodes for solar energy conversion.

Simultaneous detection of tumor-related mRNA and miRNA in cancer cells with magnetic SERS nanotags.

The design of simultaneous detection method has broad prospects for cancer diagnosis and prognosis. Herein, we reported a low cost and sensitive SERS sensing platform for simultaneous p21 mRNA and miRNA-21 detection based on duplex-specific nuclease signal amplification (DSNSA) plus multifunctional Fe3O4@SiO2 magnetic nanoparticles (Fe3O4@SiO2 MNPs). Here, Fe3O4@SiO2 MNPs were used as a separation substrate, and Au@AgNPs served as stable and ultrasensitive SERS nanotags. Firstly, Au@AgNPs and Fe3O4@SiO2 MNPs were attached to both ends of capture probe (CP) by covalent bonds. Under the assistance of the target p21 mRNA and miRNA-21, DNA (CP) of the DNA-RNA heteroduplexes could be specifically degraded by DSN and the SERS nanotags that were released from the surface of Fe3O4@SiO2 MNPs. Meanwhile, the target p21 mRNA and miRNA-21 were released and then involved in the next round of signal reactions. The proposed strategy allowed quantitative detection of p21 mRNA and miRNA-21 and the limit of detection (LOD) was 0.12 fM and 0.17 fM, respectively. This method gives a great potential for multiplex detection of biological molecules.

Highly Luminescent Copper Iodide Cluster Based Inks with Photoluminescence Quantum Efficiency Exceeding 98.

Highly luminescent inks are desirable for various applications such as decorative coating, art painting, and anticounterfeiting, to name a few. However, present inks display low photoluminescent efficiency requiring a strong excitation light to make them glow. Here, we report a highly luminescent ink based on the copper-iodide/1-Propyl-1,4-diazabicyclo[2.2.2]octan-1-ium (Cu4I6(pr-ted)2) hybrid cluster with a quantum efficiency exceeding 98%. Under the interaction between the Cu4I6(pr-ted)2 hybrid cluster and polyvinylpyrrolidone (PVP), the highly luminescent Cu4I6(pr-ted)2/PVP ink can be facilely prepared via the one-pot solution synthesis. The obtained ink exhibits strong green light emission that originates from the efficient phosphorescence of Cu4I6(pr-ted)2 nanocrystals. Attractively, the ink displays high conversion efficiency for the ultraviolet light to bright green light emission due to its wide Stokes shift, implying great potential for anticounterfeiting and luminescent solar concentrator coating.

Potassium Bromide Surface Passivation on CsPbI3-xBrx Nanocrystals for Efficient and Stable Pure Red Perovskite Light-Emitting Diodes.

All-inorganic lead halide perovskite nanocrystals (NCs) are potential candidates for fabricating high-performance light-emitting diodes (LEDs) owing to their precisely tunable bandgaps, high photoluminescence (PL) efficiency, and excellent color purities. However, the performance of pure red (630-640 nm) all-inorganic perovskite LEDs is still limited by the halide segregation-induced instability of the electroluminescence (EL) of mixed halide CsPbI3-xBrx NCs. Herein, we report an effective approach to improving the EL stability of pure red all-inorganic CsPbI3-xBrx NC-based LEDs via the passivation of potassium bromide on NCs. By adding potassium oleate to the reaction system, we obtained potassium bromide surface-passivated (KBr-passivated) CsPbI3-xBrx NCs with pure red PL emission and a photoluminescence quantum yield (PLQY) exceeding 90%. We determine that most potassium ions present on the surface of NCs bind with bromide ions and thus demonstrate that potassium bromide surface passivation of NCs can both improve the PL stability and inhibit the halide segregation of NCs. Using KBr-passivated CsPbI3-xBrx NCs as an emitting layer, we fabricated stable and pure red perovskite LEDs with emission at 637 nm, showing a maximum brightness of 2671 cd m-2, maximum external quantum efficiency of 3.55%, and good EL stability. The proposed KBr-passivated NC strategy will open a new avenue for fabricating efficient, stable, and tunable pure color perovskite NC LEDs.

General Synthesis of Lead-Free Metal Halide Perovskite Colloidal Nanocrystals in 1-Dodecanol.

Lead halide perovskite nanocrystals (NCs) exhibit great application potential in optoelectronic devices because of their tunable band gaps and facile colloidal synthesis, but they suffer from serious lead toxicity and instability. It is highly desirable to substitute lead with other elements to acquire nontoxic and environmentally friendly lead-free perovskite NCs for optoelectronic devices. Here, we report a general method for the colloidal synthesis of a series of bismuth/antimony-based halide perovskite NCs with various constituents and optical band gaps from 1.97 to 3.15 eV. In our proposed synthetic system, 1-dodecanol is adopted as the solvent instead of the conventionally used 1-octadecene to realize size controllability of bismuth/antimony-based metal halide perovskite NCs. It is found that 1-dodecanol can act as a surfactant to tightly adsorb on the surface of bismuth/antimony-based halide perovskite NCs, enabling their small sizes (∼2 nm) and high dispersibility. Simultaneously, the band gaps of bismuth/antimony-based halide (A3B2X9, where A = CH3NH3, Cs, or Rb, B = Bi or Sb, and X = Cl, Br, or I) perovskite NCs can be systematically tuned by the atomic substitution of A, B, or X lattice sites. Moreover, to show the optoelectronic application potential of these lead-free halide perovskite NCs, a solar cell based on colloidal Cs3Bi2I9 perovskite NCs is demonstrated. The developed colloidal synthesis of bismuth/antimony-based halide NCs in 1-dodecanol will offer an alternative route to fabricating lead-free halide perovskite optoelectronic devices.

Highly Luminescent Inks: Aggregation-Induced Emission of Copper-Iodine Hybrid Clusters.

Aggregation-induced emission (AIE) is an attractive phenomenon in which materials display strong luminescence in the aggregated solid states rather than in the conventional dissolved molecular states. However, highly luminescent inks based on AIE are hard to be obtained because of the difficulty in finely controlling the crystallinity of AIE materials at nanoscale. Herein, we report the preparation of highly luminescent inks via oil-in-water microemulsion induced aggregation of Cu-I hybrid clusters based on the highly soluble copper iodide-tris(3-methylphenyl)phosphine (Cu4 I4 (P-(m-Tol)3 )4 ) hybrid. Furthermore, we can synthesize a series of AIE inks with different light-emission colors to cover the whole visible spectrum range via a facile ligand exchange processes. The assemblies of Cu-I hybrid clusters with AIE characteristics will pave the way to fabricate low-cost highly luminescent inks.

Nanocrystalline TiO2 Composite Films for the Photodegradation of Formaldehyde and Oxytetracycline under Visible Light Irradiation.

In order to effectively photodegradate organic pollutants, ZnO composite and Co-B codoped TiO2 films were successfully deposited on glass substrates via a modified sol-gel method and a controllable dip-coating technique. Combining with UV-Vis diffuse reflectance spectroscopy (DRS) and photoluminescence spectra (PL) analyses, the multi-modification could not only extend the optical response of TiO2 to visible light region but also decrease the recombination rate of electron-hole pairs. XRD results revealed that the multi-modified TiO2 film had an anatase-brookite biphase heterostructure. FE-SEM results indicated that the multi-modified TiO2 film without cracks was composed of smaller round-like nanoparticles compared to pure TiO2. BET surface area results showed that the specific surface area of pure TiO2 and the multi-modified TiO2 sample was 47.8 and 115.8 m²/g, respectively. By degradation of formaldehyde and oxytetracycline, experimental results showed that the multi-modified TiO2 film had excellent photodegradation performance under visible light irradiation.

Capacitance Performance of Nanostructured CoNi2 S4 with Different Morphology Grown on Carbon Cloth for Supercapacitors.

Nanostructured CoNi2 S4 materials with different morphologies were successfully grown on carbon cloth through a facile precursor transformation method by adjusting the anions in nickel cobalt salts. The resulting samples were characterized by XRD, EDS, FESEM, and TEM and were found to display different morphologies. Their electrochemical performance was investigated by means of cyclic voltammetry (CV), galvanostatic charge-discharge, electrochemical impedance spectroscopy (EIS), and cycle life. The as-obtained CoNi2 S4 sample with NO3 - as the anion in the nickel cobalt salt displayed an ultrahigh specific capacitance of 2714 F g-1 at 1 A g-1 and excellent rate capability (64.8 % capacity retention at 20 A g-1 ). However, the as-obtained CoNi2 S4 samples with SO4 2- and Cl- as the anions in the precursors displayed a limited specific capacitance of only 1750 and 1334 F g-1 , respectively. Besides, they also displayed different performances in the cycle life test. The study indicates that the as-obtained CoNi2 S4 grown on carbon cloth prepared with NO3 - as the anion will be a promising electrode material for supercapacitors.

Seaurchin-like hierarchical NiCo2O4@NiMoO4 core-shell nanomaterials for high performance supercapacitors.

A novel electrode material of the three-dimensional (3D) multicomponent oxide NiCo2O4@NiMoO4 core-shell was synthesized via a facile two-step hydrothermal method using a post-annealing procedure. The uniform NiMoO4 nanosheets were grown on the seaurchin-like NiCo2O4 backbone to form a NiCo2O4@NiMoO4 core-shell material constructed by interconnected ultrathin nanosheets, so as to produce hierarchical mesopores with a large specific surface area of 100.3 m(2) g(-1). The porous feature and core-shell structure can facilitate the penetration of electrolytic ions and increases the number of electroactive sites. Hence, the NiCo2O4@NiMoO4 material exhibited a high specific capacitance of 2474 F g(-1) and 2080 F g(-1) at current densities of 1 A g(-1) and 20 A g(-1) respectively, suggesting that it has not only a very large specific capacitance, but also a good rate performance. In addition, the capacitance loss was only 5.0% after 1000 cycles of charge and discharge tests at the current density of 10 A g(-1), indicating high stability. The excellent electrochemical performance is mainly attributed to its 3D core-shell and hierarchical mesoporous structures which can provide unobstructed pathways for the fast diffusion and transportation of ions and electrons, a large number of active sites and good strain accommodation.