A H2@C601H NMR probe for sensitively detecting the supramolecular interactions between a molecular tweezer and C60.

Herein, we firstly utilized H2@C60 to monitor the supramolecular interaction between a pH-driven resorcin[4]arene molecular tweezer and C60 with a notable 1H NMR chemical shift change (ca. 0.34 ppm). This work provides a new strategy for detecting weak or complex supramolecular interactions.

Design and preliminary verification of a novel powered ankle-foot prosthesis: From the perspective of lower-limb biomechanics compared with ESAR foot.

A novel powered ankle-foot prosthesis is designed. The effect of wearing the novel prosthesis and an energy-storage-and-return (ESAR) foot on lower-limb biomechanics is investigated to preliminarily evaluate the design. With necessary auxiliary materials, a non-amputated subject (a rookie at using prostheses) is recruited to walk on level ground with an ESAR and the novel powered prostheses separately. The results of the stride characteristics, the ground reaction force (GRF) components, kinematics, and kinetics in the sagittal plane are compared. Wearing the powered prosthesis has less prolongation of the gait cycle on the unaffected side than wearing the ESAR foot. Wearing ESAR or proposed powered prostheses influences the GRF, kinematics, and kinetics on the affected and unaffected sides to some extent. Thereinto, the knee moment on the affected side is influenced most. Regarding normal walking as the reference, among the total of 15 indexes, the influences of wearing the proposed powered prosthesis on six indexes on the affected side (ankle's/knee's/hip's angles, hip's moment, and Z- and X-axis GRF components) and five indexes on the unaffected side (ankle's/knee's/hip's angles and ankle's/hip's moments) are slighter than those of wearing the ESAR foot. The influences of wearing the powered prosthesis on two indexes on the unaffected side (knee's moment and X-axis GRF component) are similar to those of wearing the ESAR foot. The greatest improvement of wearing the powered prosthesis is to provide further plantarflexion after reaching the origin of the ankle joint before toe-off, which means that the designed powered device can provide further propulsive power for the lifting of the human body's centre of gravity during walking on level ground. The results demonstrate that wearing the novel powered ankle-foot prosthesis benefits the rookie in recovering the normal gait more than wearing the ESAR foot.

Polymerizable Deep Eutectic Solvent-Based Polymer Electrolyte for Advanced Dendrite-Free, High-Rate, and Long-Life Li Metal Batteries.

The recently developed advanced electrolytes possess many crucial qualities, including robust stability, Li dendrite-free, and comparable interface compatibility, for the manufacturing of Li metal batteries with a high energy density. In this study, lithium bis(trifluoromethane)sulfonimide, acrylamide, and succinonitrile were first used to design a polymerizable monomer. Then, it went through in situ thermal polymerization to attain a new solid polymer electrolyte [named poly(PDES)]. The synthesized poly(PDES) electrolyte achieved higher ionic conductivity (∼1.89 × 10-3 S cm-1), oxidation potential (∼5.10 V versus Li+/Li), and a larger lithium-ion transfer number (∼0.63). Moreover, poly(PDES) was nonflammable and could effectively inhibit the formation of Li dendrites. As a result, the assembled batteries using the poly(PDES) electrolyte for both Li||LiFePO4 and Li||LiNi0.8Co0.1Mn0.1O2 exhibited excellent interface compatibility and electrochemical performances. This poly(PDES) electrolyte has promising potential for broad application in lithium-metal batteries with elevated energy density and safety performance in the near future.

High-Precision Ultra-Long Air Slit Fabrication Based on MEMS Technology for Imaging Spectrometers.

The increasing demand for accurate imaging spectral information in remote sensing detection has driven the development of hyperspectral remote sensing instruments towards a larger view field and higher resolution. As the core component of the spectrometer slit, the designed length reaches tens of millimeters while the precision maintained within the µm level. Such precision requirements pose challenges to traditional machining and laser processing. In this paper, a high-precision air slit was created with a large aspect ratio through MEMS technology on SOI silicon wafers. In particular, a MEMS slit was prepared with a width of 15 µm and an aspect ratio exceeding 4000:1, and a spectral spectroscopy system was created and tested with a Hg-Cd light source. As a result, the spectral spectrum was linear within the visible range, and a spectral resolution of less than 1 nm was obtained. The standard deviation of resolution is only one-fourth of that is seen in machined slits across various view fields. This research provided a reliable and novel manufacturing technique for high-precision air slits, offering technical assistance in developing high-resolution wide-coverage imaging spectrometers.

Effects of cryo-processing on the mechanical and biological properties of poly(vinyl alcohol)-gelatin theta-gels.

Poly(vinyl alcohol) (PVA), a synthetic, nontoxic polymer, is widely studied for use as a biomedical hydrogel due to its structural and physicomechanical properties. Depending on the synthesis method, PVA hydrogels can exhibit a range of selected characteristics-strength, creep resistance, energy dissipation, degree of crystallinity, and porosity. While the structural integrity and behavior of the hydrogel can be fine-tuned, common processing techniques result in a brittle, linear elastic material. In addition, PVA lacks functionality to engage and participate in cell adhesion, which can be a limitation for integrating PVA materials with tissue in situ. Thus, there is a need to further engineer PVA hydrogels to optimize its physicomechanical properties while enhancing cell adhesion and bioactivity. While the inclusion of gelatin into PVA hydrogels has been shown to impart cell-adhesive properties, the optimization of the mechanical properties of PVA-gelatin blends has not been studied in the context of traditional PVA hydrogel processing techniques. The incorporation of poly(ethylene glycol) with PVA prior to solidification forms an organized, cell instructive hydrogel with improved stiffness. The effect of cryo-processing, i.e., freeze-thaw (FT) cycling was elucidated by comparing 1 FT and 8 FT theta-cryo-gels and cryo-gels. To confirm the viability of the gels, human mesenchymal stem cell (hMSC) protein and sulfated glycosaminoglycan assays were performed to verify the nontoxicity and influence on hMSC differentiation. We have devised an elastic PVA-gelatin hydrogel utilizing the theta-gel and cryo-gel processing techniques, resulting in a stronger, more elastic material with greater potential as a scaffold for complex tissues.