Copper Nanodrugs by Atom Transfer Radical Polymerization.

In this study, some copper catalysts used for atom transfer radical polymerization (ATRP) were explored as efficient anti-tumor agents. The aqueous solution of copper-containing nanoparticles with uniform spheric morphology was in situ prepared through a copper-catalyzed activator generated by electron transfer (AGET) ATRP in water. Nanoparticles were then directly injected into tumor-bearing mice for antitumor chemotherapy. The copper nanodrugs had prolonged blood circulation time and enhanced accumulation at tumor sites, thus showing potent antitumor activity. This work provides a novel strategy for precise and large-scale preparation of copper nanodrugs with high antitumor activity.

Catalytic Amounts of an Antibacterial Monomer Enable the Upcycling of Poly(Ethylene Terephthalate) Waste.

Poly(ethylene terephthalate) (PET) is an important polymer with an annual output second only to polyethylene. The development of PET recycling technologies is therefore necessary to not only eliminate the harm associated with white pollution and microplastics, but also to reduce carbon emissions. Antibacterial PET, one of the most high-value advanced materials, has improved the ability to treat bacterial infections. However, current methods of manufacturing commercial antibacterial PET require blending with an excess of metal-based antibacterial agents, which leads to biotoxicity and a nonpersistent antibacterial activity. In addition, high-efficiency organic antibacterial agents have yet to be employed in antibacterial PET due to their poor thermal stabilities. Herein, a solid-state reaction for the upcycling of PET waste using a novel hyperthermostable antibacterial monomer is described. This reaction is catalyzed by the residual catalyst present in the PET waste. It is found that a catalytic amount of the antibacterial monomer enabled the low-cost upcycling of PET waste to produce high-value recycled PET with a strong and persistent antibacterial activity, as well as similar thermal properties to the virgin PET. This work provides a feasible and economic strategy for the large-scale upcycling of PET waste and exhibits potential for application in the polymer industry.

Full Poly(ethylene glycol) Hydrogels with High Ductility and Self-Recoverability.

Energy dissipation is a common mechanism to improve the ductility of polymeric hydrogels. However, for poly(ethylene glycol) (PEG) hydrogels, it is not easy to dissipate energy, as polymer chains are dispersed in water without strong interchain interactions or decent entanglement. The brittleness limits the real applications of PEG hydrogels, although they are promising candidates in biomedical fields, as PEG has been approved by the U.S. Food and Drug Administration. Herein, we chemically introduced a center for energy dissipation in the PEG hydrogel system. Amphiphilic segmented PEG derivatives were designed through the melt polycondensation of triethylene glycol (PEG150) and high molecular weight PEG in the presence of succinic acid and mercaptosuccinic acid as dicarboxylic acids. Full PEG hydrogels with elastic nanospheres as giant cross-linkers were facilely prepared by the self-assembly of esterified PEG150 segments and the oxidation of mercapto groups. The resultant full PEG hydrogels can dissipate energy by the deformation of elastic nanospheres with outstanding ductility and self-recoverability while maintaining the excellent biocompatibility owing to their full PEG components. This work provides an original strategy to fabricate full PEG hydrogels with high ductility and self-recoverability, potentially applicable in biomedical fields.

Orientational Order of a Lyotropic Chromonic Liquid Crystal Measured by Polarized Raman Spectroscopy.

Lyotropic chromonic liquid crystals are distinct from thermotropic nematics from a fundamental standpoint as the structure of the aggregating columns is a function of both the temperature and concentration. We report on the thermal evolution of orientational order parameters, both the second (=scalar) (⟨P200⟩ (=S)) and fourth (⟨P400⟩) order, of sunset yellow FCF aqueous solutions, measured using polarized Raman spectroscopy for different concentrations. The order parameter increases with the concentration, and their values are high in comparison with those of thermotropic liquid crystals. On the basis of Raman spectroscopy, we provide the strongest evidence yet that the hydrozone tautomer of SSY is the predominant form in aqueous solutions in the isotropic, nematic, and columnar phases, as well as what we believe to be the first measurements of (⟨P400⟩) for this system.

Disclination elastica model of loop collision and growth in confined nematic liquid crystals.

Theory and modeling are used to characterize disclination loop-loop interactions in nematic liquid crystals under capillary confinement with strong homeotropic anchoring. This defect process arises when a mesogen in the isotropic phase is quenched into the stable nematic state. The texture evolution starts with +1/2 disclination loops that merge into a single loop through a process that involves collision, pinching and relaxation. The process is characterized with a combined Rouse-Frank model that incorporates the tension and bending elasticity of disclinations and the rotational viscosity of nematics. The Frank model of disclinations follows the Euler elastica model, whose non-periodic solution, known as Poleni's curve, is shown to locally describe the loop-loop collision and to shed light on why loop-loop merging results in a disclination intersection angle of approximately 60°. Additional Poleni invariants demonstrate how tension and bending pinch the two loops into a single +1/2 disclination ring. The Rouse model of disclination relaxation yields a Cahn-Hilliard equation whose time constant combines the confinement, tension/bending stiffness ratio and disclination diffusivity. Based on predictions made using this three stage process, a practical procedure is proposed to find viscoelastic parameters from defect geometry and defect dynamics. These findings contribute to the evolving understanding of textural transformations in nematic liquid crystals under confinement using the disclination elastica methodology.

Theoretical predictions of disclination loop growth for nematic liquid crystals under capillary confinement.

The combination of low elasticity modulus, anisotropy, and responsiveness to external fields drives the rich variety of experimentally observed pattern formation in nematic liquid crystals under capillary confinement. External fields of interest in technology and fundamental physics are flow fields, electromagnetic fields, and surface fields due to confinement. In this paper we present theoretical and simulation studies of the pattern formation of nematic liquid crystal disclination loops under capillary confinement including branching processes from a m=+1 disclination line to two m=+1/2 disclination curves that describe the postnucleation and growth regime of the textural transformation from radial to planar polar textures. The early postnucleation and growth of emerging disclination loops in cylindrical capillaries are characterized using analytical and computational methods based on the nematic elastica that takes into account line tension and line bending stiffness. Using subdiffusive growth and constant loop anisotropy, we found that the solution to the nematic elastica is a cusped elliptical geometry characterized by exponential curvature variations. The scaling laws that govern the loop growth reflect the tension to bending elasticity balance and reveal that the loop dilation rate depends on the curvature and normal velocity of the disclination. The line energy growth is accommodated by the decrease in branch-point curvature. These findings contribute to the evolving understanding of textural transformations in nematic liquid crystals under confinement using the nematic elastic methodology.

Mechanisms and shape predictions of nematic disclination branching under conical confinement.

Liquid crystals (LCs) are self-organizing anisotropic viscoelastic soft materials that flow like viscous liquids and display anisotropies like crystals. When a nematic liquid crystal is confined to a capillary tube with strong anchoring conditions, disclination defects of higher (+1) and lower (+1/2) topological charges can coexist, connected through a defect branch point. The shape of the +1/2 disclination lines emanating from the branch point are functions of confinement and bulk elasticity. Previous work shows that nematic liquid crystals under cylindrical confinement display a radial (one +1 line)-to-planar polar (two +1/2 lines) defect texture transition through the nucleation and uniform motion of a disclination branch point. Here we present analysis, scaling and modeling based on a non-linear non-local nematic elastic equation that shows that a branch point also can be generated from disclinations in a liquid crystal confined to different conical geometries with homeotropic anchoring conditions. The cone aperture increases the bending stiffness but decreases the curvature of the disclination. These competing effects lead to a decrease in the total disclination curvature, increase in elastic energy and volume of the branching region. The results are summarized into power laws and integrated into a shape/energy diagram that reveals the effects of confinement and its gradient (cone angle) on disclination shape selection. These new findings are useful to assess the Frank elasticity of new nematic liquid crystals and to predict novel defect structures in complex confinement, including biological microfluidics and mesophase fiber spinning.

A three-dimensional vertically aligned functionalized multilayer graphene architecture: an approach for graphene-based thermal interfacial materials.

Thermally conductive functionalized multilayer graphene sheets (fMGs) are efficiently aligned in large-scale by a vacuum filtration method at room temperature, as evidenced by SEM images and polarized Raman spectroscopy. A remarkably strong anisotropy in properties of aligned fMGs is observed. High electrical (∼386 S cm(-1)) and thermal conductivity (∼112 W m(-1) K(-1) at 25 °C) and ultralow coefficient of thermal expansion (∼-0.71 ppm K(-1)) in the in-plane direction of A-fMGs are obtained without any reduction process. Aligned fMGs are vertically assembled between contacted silicon/silicon surfaces with pure indium as a metallic medium. Thus-constructed three-dimensional vertically aligned fMG thermal interfacial material (VA-fMG TIM) architecture has significantly higher equivalent thermal conductivity (75.5 W m(-1) K(-1)) and lower contact thermal resistance (5.1 mm2 K W(-1)), compared with their counterpart from A-fMGs that are recumbent between silicon surfaces. This finding provides a throughout approach for a graphene-based TIM assembly as well as knowledge of vertically aligned graphene architectures, which may not only facilitate graphene's application in current demanding thermal management but also promote its widespread applications in electrodes of energy storage devices, conductive polymeric composites, etc.