Construction of Conjugated Organic Polymers for Efficient Photocatalytic Hydrogen Peroxide Generation with Adequate Utilization of Water Oxidation.

The visible-light-driven photocatalytic production of hydrogen peroxide (H2O2) is currently an emerging approach for transforming solar energy into chemical energy. In general, the photocatalytic process for producing H2O2 includes two pathways: the water oxidation reaction (WOR) and the oxygen reduction reaction (ORR). However, the utilization efficiency of ORR surpasses that of WOR, leading to a discrepancy with the low oxygen levels in natural water and thereby impeding their practical application. Herein, we report a novel donor-bridge-acceptor (D-B-A) organic polymer conjugated by the Sonogashira-Hagihara coupling reaction with tetraphenylethene (TPE) units as the electron donors, acetylene (A) as the connectors and pyrene (P) moieties as the electron acceptors. Notably, the resulting TPE-A-P exhibits a remarkable solar-to-chemical conversion of 1.65% and a high BET-specific surface area (1132 m2·g-1). Furthermore, even under anaerobic conditions, it demonstrates an impressive H2O2 photosynthetic efficiency of 1770 µmol g-1 h-1, exceeding the vast majority of previously reported photosynthetic systems of H2O2. The outstanding performance is attributed to the effective separation of electrons and holes, along with the presence of sufficient reaction sites facilitated by the incorporation of alkynyl electronic bridges. This protocol presents a successful method for generating H2O2 via a water oxidation reaction, signifying a significant advancement towards practical applications in the natural environment.

Oxygen-Centered Organic Radicals-Involved Unified Heterogeneous Self-Fenton Process for Stable Mineralization of Micropollutants in Water.

Removing organic micropollutants from water through photocatalysis is hindered by catalyst instability and substantial residuals from incomplete mineralization. Here, a novel water treatment paradigm, the unified heterogeneous self-Fenton process (UHSFP), which achieved an impressive 32% photon utilization efficiency at 470 nm, and a significant 94% mineralization of organic micropollutants-all without the continual addition of oxidants and iron ions is presented. In UHSFP, the active species differs fundamentally from traditional photocatalytic processes. One electron acceptor unit of photocatalyst acquires only one photogenerated electron to convert into oxygen-centered organic radical (OCOR), then spontaneously completing subsequent processes, including pollutant degradation, hydrogen peroxide generation, activation, and mineralization of organic micropollutants. By bolstering electron-transfer capabilities and diminishing catalyst affinity for oxygen in the photocatalytic process, the generation of superoxide radicals is effectively suppressed, preventing detrimental attacks on the catalyst. This study introduces an innovative and cost-effective strategy for the efficient and stable mineralization of organic micropollutants, eliminating the necessity for continuous chemical inputs, providing a new perspective on water treatment technologies.

On-Site Ratiometric Analysis of UO22+ with High Selectivity.

Uranyl ions (UO22+) are recognized as important indicators for monitoring sudden nuclear accidents. However, the interferences coexisting in the complicated environmental matrices impart serious constraints on the reliability of current on-site monitoring methods. Herein, a novel ratiometric method for the highly sensitive and selective detection of UO22+ is reported based on a [Eu(diaminoterephthalic acid)] (Eu-DATP) metal-organic framework. Benefiting from the unique chemical structure of Eu-DATP, energy transfer from DATP to UO22+ was enabled, resulting in the up-regulated fluorescence of UO22+ and the simultaneous down-regulated fluorescence of Eu3+. The limit of detection reached as low as 2.7 nM, which was almost 2 orders of magnitude below the restricted limit in drinking water set by the United States Environmental Protection Agency (130 nM). The Eu-DATP probe showed excellent specificity to UO22+ over numerous interfering species, as the intrinsic emissions of UO22+ were triggered. This unprecedentedly high selectivity is especially beneficial for monitoring UO22+ in complicated environmental matrices with no need for tedious sample pretreatment, such as filtration and digestion. Then, by facilely equipping a Eu-DATP-based sampler on a drone, remotely controlled sampling and on-site analysis in real water samples were realized. The concentrations of UO22+ were determined to be from 16.5 to 23.5 nM in the river water of the Guangzhou downtown area, which was consistent with the results determined by the gold-standard inductively coupled plasma mass spectrometry. This study presents a reliable and convenient method for the on-site analysis of UO22+.

Enhancing Photosynthesis Efficiency of Hydrogen Peroxide by Modulating Side Chains to Facilitate Water Oxidation at Low-Energy Barrier Sites.

Hydrogen peroxide (H2O2) is a crucial oxidant in advanced oxidation processes. In situ, photosynthesis of it in natural water holds the promise of practical application for water remediation. However, current photosynthesis of H2O2 systems primarily relies on oxygen reduction, leading to limited performance in natural water with low dissolved oxygen or anaerobic conditions found in polluted water. Herein, a novel photocatalyst based on conjugated polymers with alternating electron donor-acceptor structures and electron-withdrawing side chains on electron donors is introduced. Specifically, carbazole functions as the electron donor, triazine serves as the electron acceptor, and cyano acts as the electron-withdrawing side chain. Notably, the photocatalyst exhibits a remarkable solar-to-chemical conversion of 0.64%, the highest reported in natural water. Furthermore, even in anaerobic conditions, it achieves an impressive H2O2 photosynthetic efficiency of 1365 µmol g-1 h-1, surpassing all the reported photosynthetic systems of H2O2. This remarkable improvement is attributed to the effective relocation of the water oxidation active site from a high-energy carbazole to a low-energy acetylene site mediated by the side chains, resulting in enhanced O2 or H2O2 generation from water. This breakthrough offers a new avenue for efficient water remediation using advanced oxidation technologies in oxygen-limited environments, holding significant implications for environmental restoration.

Rapid analysis of dichlorvos via releasing the phosphate core.

Monitoring the residual dichlorvos (O,O-dimethyl-O-2,2-dichlorovinylphosphate, DDVP) in food has received extensive attention owing to its large consumption in agriculture. However, the previous sensing methods are not time-efficient enough due to the long incubation time for enzyme inhibition (tens of minutes to hours) or bottlenecked by the complicated procedures for senor fabrication. Herein, a novel sensing strategy is proposed based on the hydrolysis of DDVP into PO43-. By using alkaline phosphatase for hydrolysis, a certain portion of DDVP was transformed to PO43- within only 8 min. Then, the released PO43- was detected by a fluorescent terbium metal-organic framework (Tb-MOF). The coordination of the naked P-O groups to the metal nodes of the Tb-MOF disturbed the antenna effects of its ligands. Thus, DDVP was quantified by the decrease of the fluorescence of Tb ions. Based on this method, DDVP residues on plum surfaces were collected by swabs and successfully detected. The recovery of DDVP was determined in the range from 105 % to 115 %, demonstrating the quantification accuracy of this method. The detection limit reached 4.7 µM, which was lower than the restricted amount in fruit set by the National Standard of China. The present method provides an efficient and user-friendly way for the detection of DDVP and many other organophosphorus pesticides in food.

Metal-Free Photocatalytic CO2 Reduction to CH4 and H2 O2 under Non-sacrificial Ambient Conditions.

Photocatalytic CO2 reduction to CH4 requires photosensitizers and sacrificial agents to provide sufficient electrons and protons through metal-based photocatalysts, and the separation of CH4 from by-product O2 has poor applications. Herein, we successfully synthesize a metal-free photocatalyst of a novel electron-acceptor 4,5,9,10-pyrenetetrone (PT), to our best knowledge, this is the first time that metal-free catalyst achieves non-sacrificial photocatalytic CO2 to CH4 and easily separable H2 O2 . This photocatalyst offers CH4 product of 10.6 µmol ⋅ g-1 ⋅ h-1 under non-sacrificial ambient conditions (room temperature, and only water), which is two orders of magnitude higher than that of the reported metal-free photocatalysts. Comprehensive in situ characterizations and calculations reveal a multi-step reaction mechanism, in which the long-lived oxygen-centered radical in the excited PT provides as a site for CO2 activation, resulting in a stabilized cyclic carbonate intermediate with a lower formation energy. This key intermediate is thermodynamically crucial for the subsequent reduction to CH4 product with the electronic selectivity of up to 90 %. The work provides fresh insights on the economic viability of photocatalytic CO2 reduction to easily separable CH4 in non-sacrificial and metal-free conditions.

Noncovalent Tagging for Identifying Unknown Contaminants of Specific Bioactivity in Environmental Water.

Identifying contaminants of specific bioactivities from complicated environmental matrices remains costly and time-consuming, as it requires us to not only resolve their structures but also determine their bioactivities. Herein, a novel noncovalent tagging method is integrated in mass spectrometry for identifying unknown contaminants that target dopamine (DA) receptors. Via proteolysis of bovine serum albumin, a stereoselective hexapeptide (ACFAVE) is selected for noncovalently tagging the contaminants that possess the stereostructural characteristics of binding to DA receptors. The tagged contaminants can be readily distinguished from the coexisting species for subsequent structural analysis based on the tagging-induced shifts of the mass-to-charge ratios. Thus, both bioactivity evaluation and structure analysis are accomplished via mass spectrometry. By using this method, 1,3-diphenylguanidine (DPG), a widely used additive in rubber and plastics, is successfully identified out of 2495 features detected in the Pearl River water, with its concentration determined as only 9.8 µg L-1. Furthermore, DPG is confirmed as a potential disrupter to the DA receptors via a simulated docking experiment, which has not been reported before. The present noncovalent tagging method provides a cost-effective and time-efficient way of identifying bioactive molecules in complicated matrices. And proteolysis of proteins is promising for developing more taggants with other desired stereoselectivities in the future.

Two-Dimensional Conductive Metal-Organic Framework for Small-Molecule Sensing in Aqueous Solution.

Two-dimensional (2D) conductive metal-organic frameworks (cMOFs) have emerged as powerful transducers for electrochemical sensing. However, electrochemical sensing in aqueous solutions remains at a very early stage for 2D cMOFs. Herein, the interfacial capacitances of a 2D cMOF are utilized for electrochemical sensing for the first time. Various redox-innocent compounds along with redox-active compounds in aqueous solutions are successfully detected based on the responses of two capacitance peaks at low voltages. The quantitative sensitivity to ascorbic acid is even an order of magnitude higher than the previous voltammetric method. Further investigation demonstrates that the responses are rooted in the pseudocapacitances of the 2D cMOF, i.e., the transitions among the multiple redox states of the ligands. The analytes are suggested to alert the d-p conjugation and exchange electrons with the 2D cMOF. These deep insights in response mechanisms represent an important step for promoting the application of 2D cMOFs in chemical sensing.

Novel lanthanide nanoparticle frameworks for highly efficient photoluminescence and hypersensitive detection.

Despite the excellent luminescent properties of lanthanide clusters (LnCs), their suprastructures that inherit their characteristic luminescent properties are scarcely reported. Herein, novel and highly luminescent suprastructures are synthesized via a two-step assembly method to incorporate LnCs in covalent organic frameworks (COFs). COFs are pre-synthesized and decorated with rigid anchoring groups on their nanochannel walls, which provide one-dimensional confined spaces for the subsequent in situ assembly of luminescent LnCs. The confined LnCs are termed nanoparticles (NPs) to distinguish them from the pure LnCs. Secondary micropores with predictable sizes are successfully formed between the walls of the nanochannels and the orderly aligned NPs therein. By using a small organic ligand that can efficiently sensitize Ln(iii) cations in the assembly processes, the obtained composites show high quantum yields above 20%. The fluorescence can even be effectively maintained across nine pH units. The secondary micropores further enable the unambiguous discrimination of six methinehalides and ultrasensitive detection of uranyl ions. This study provides a new type of luminescent material that has potential for sensing and light emitting.

Hydrogen bond networks in gas-phase complex anions.

Hydrogen bond networks (HBNs) have piqued the interest of the scientific community due to their crucial roles in nature. However, HBNs that are isolated from complicated backgrounds for unraveling their characteristics are still scarce. Herein, we propose that HBNs exist in complex anions formed between α-cyclodextrin (α-CD) and four benzoic acids (RBAs) in the gas phase. The complex anions are facilely extracted from solutions via the electrospray ionization technique, and subsequently activated through collision for the investigation of their transition dynamics. It is revealed that the generation of deprotonated α-CD and neutral RBAs is the unexpected dominant dissociation pathway for all the four complex anions, and the complex anions formed from more acidic RBAs exhibit higher stabilities. These dissociation results are successfully explained by the cooperative stretching dynamics of the proposed HBNs that are formed involving the intramolecular HBN of α-CD and the intermolecular hydrogen bonds (HBs) between α-CD and RBAs. Furthermore, the rarely observed low barrier HBs (LBHBs) are suggested to be present in the HBNs. It is believed that the present complex anions can serve as a facilely accessible and informative model for studying HBNs in the future.

Identifying a selective oligopeptide clamp in the gas phase.

Oligopeptide foldamers are promising as minimalist functional analogues to proteins. Herein, we report a versatile and cost-effective experimental scheme in the gas phase that can facilely identify selective oligopeptides and unambiguously resolve the corresponding folding conformations. Based on this methodology, a stereoselective oligopeptide clamp targeting ß2-blockers is successfully identified.

High-quality full-color carbon quantum dots synthesized under an unprecedentedly mild condition.

Carbon quantum dots (CQDs) are highly promising to be applied in light-emitting, chemosensing, and other cutting-edge domains. Herein, we successfully fabricate high-quality full-color CQDs under unprecedentedly low temperature and pressure (85°C, 1.88 bar). Stable and narrow fluorescent emissions ranging from blue to green and red light were realized by simple amine engineering, which were further mixed into white-light CQDs with the absolute photoluminescent quantum yield reaching 19.2%. The average mass yield of the CQDs reached 69.0%. The optical performances demonstrated that the CQDs possessed uniform luminescent centers and dominant radiative decay channels. Component analysis further suggested that dehydrated condensation between carboxyl and amine groups directed the growth of the CQDs. By utilizing the CQDs, full-color light-emitting diodes and logic gate sensors were developed. This study paves an important step for promoting the application of CQDs by providing an energy-efficient, safe, and productive synthetic strategy.

Spontaneous exciton dissociation in organic photocatalyst under ambient conditions for highly efficient synthesis of hydrogen peroxide.

SignificanceHydrogen peroxide is a highly competitive ready-to-use product for solar energy transformation. Nevertheless, the contemporary photosynthetic systems are not efficient enough, due to severe charge recombination caused by high activation energy and binding energy of the exciton. Herein, we achieve spontaneous exciton dissociation at room temperature. Moreover, the photosynthesis of H2O2 reaches between 9,366 and 12,324 µmol·g-1 from 9 AM to 4 PM in ambient conditions, that is, sunlight irradiation, real water including fresh water and seawater, room temperature, and open air. The ultrahigh photocatalytic efficiency in ambient conditions allows the solar-to-chemical conversion in a real cost-effective and sustainable way, which represents an important step toward real applications.

Superficially capped amino metal-organic framework for efficient solid-phase microextraction of perfluorinated alkyl substances.

Perfluorinated alkyl substances (PFASs) were ubiquitously in the surface and groundwater. It is crucial and urgent to develop a rapid and ultrasensitive analysis method for the quantification of trace-level PFASs. Herein, a highly hydrophobic sorbent by capping phenylsilane groups on the surfaces of NH2-UiO-66(Zr) nanocrystals was used for efficient solid-phase microextraction (SPME) of PFASs in water samples. It was found that the superficially capped nanocrystals (NH2-UiO-66(Zr)-hp) exhibited both faster extraction kinetics and higher enrichment capacity than the non-capped nanocrystals. The extraction of eleven kinds of PFASs by NH2-UiO-66(Zr)-hp fiber reached equilibrium in 20 min. The enrichment factors of the NH2-UiO-66(Zr)-hp fiber ranged from 6.5 to 48, with a preference for long-chain PFASs over short-chain PFASs. It was proposed that superficial capping eliminated competitive moisture adsorption on the surfaces of the non-capped nanocrystals, thus facilitating the adsorption of PFASs through hydrophobic interaction. By using this new sorbent, the limits of detection of the SPME method as low as 0.035 to 0.616 ng·L-1 were achieved for the target PFASs. The recoveries of PFASs in the environmental water samples were 80.9%-120%. This study presents a new strategy for developing an efficient sorbent for PFASs by surface hydrophobic modification.

A solar-to-chemical conversion efficiency up to 0.26% achieved in ambient conditions.

Artificial photosynthesis in ambient conditions is much less efficient than the solar-to-biomass conversion (SBC) processes in nature. Here, we successfully mimic the NADP-mediated photosynthetic processes in green plants by introducing redox moieties as the electron acceptors in the present conjugated polymeric photocatalyst. The current artificial process substantially promotes the charge carrier separation efficiency and the oxygen reduction efficiency, achieving a photosynthesis rate for converting Earth-abundant water and oxygen in air into hydrogen peroxide as high as 909 µmol⋅g-1⋅h-1 and a solar-to-chemical conversion (SCC) efficiency up to 0.26%. The SCC efficiency is more than two times higher than the average SBC efficiency in nature (0.1%) and the highest value under ambient conditions. This study presents a strategy for efficient SCC in the future.

Noncovalently Tagged Gas Phase Complex Ions for Screening Unknown Contaminant Metabolites in Plants.

Screening the metabolites of emerging organic contaminants (EOCs) from complicated biological matrices is an important but challenging task. Although stable isotope labeling (SIL) is frequently used to facilitate the identification of contaminant metabolites from redundant interfering components, the isotopically labeled reagents are expensive and difficult to synthesize, which greatly constrains the application of the SIL method. Herein, a new online noncovalent tagging method was developed for screening the metabolites of 1H-benzotriazol (BT) based on the characteristic structural moieties reserved in the metabolites. By selecting ß-cyclodextrin (ß-CD) as a macrocyclic tagging reagent, metabolites with the reserved moiety were expected to exhibit a characteristic shift of the mass-to-charge ratio (Δm/z = 1134.3698) after being noncovalently tagged by ß-CD. Based on the characteristic mass shift, the suspected features were reduced by 1 order of magnitude, as numerous interfering species that could not be effectively tagged by ß-CD were excluded. From these suspected features, two metabolites of BT that have not been reported before were successfully screened out. The significant characteristic mass shift caused by the noncovalent tagging method is easier to identify with more confidence than the previously reported SIL method. Besides, noncovalent tagging reagents can be much more accessible and less expensive than isotopically labeled reagents. Hence, this online noncovalent tagging method can be an intriguing alternative to the conventional SIL method.

Ratiometric fluorescent probe for the on-site monitoring of coexisted Hg2+ and F- in sequence.

The monitoring of mercury and fluoride ions (Hg2+ and F-) has aroused wide concerns owing to the high toxicity of Hg2+ and the duplicitous nature of F- to human health. As far as we known, more than 100 million people in poverty-stricken areas are still at high risk of being over-exposed to Hg2+ and F- via drinking water. Simple and cost-effective luminescent methods are highly promising for on-site water monitoring in rural areas. However, the development of multipurpose luminescent probes that are accurate and sensitive remains challenging. Herein, a new strategy for rationally designing a multipurpose ratiometric probe is present. The obtained probe is consisted of two emission units with energy transfer between them, which exhibit high coordination affinities to the two coexisted toxic targets (Hg2+ and F-), respectively. Thus, two distinct routes for efficiently modulating the energy transfer in the probe are present to trigger the responses to the two targets in sequence. By detecting the shift of the emission color with a smartphone, an on-site water monitoring method is successfully established with the detection limits as low as 2.7 nM for Hg2+ and 1.9 µM for F-. The present study can expend the toolbox for water monitoring in rural regions.

Polymer Ligand-Sensitized Lanthanide Metal-Organic Frameworks for an On-Site Analysis of a Radionuclide.

Herein, a new strategy to increase the sensitivity of a lanthanide metal-organic framework (Ln-MOF) to UO22+ was proposed by using polymeric ligands. By utilizing [Tb(1,3,5-benzenetrisbenzoate)]n (Tb-TBT) MOF as the host, preloaded 2-vinyl terephthalic acid (VTP) was polymerized in situ, which produced a novel fluorescent composite denoted as PVTP⊂Tb-TBT. Benefiting from the coordination of PVTP to the Tb nodes, the polymeric chains performed both as molecular scaffolds that improved the water stability of the framework and as additional antennae that sensitized the photoluminescence of the Tb nodes. More importantly, the detection sensitivity and selectivity of PVTP⊂Tb-TBT to UO22+ were much improved compared to those of Tb-TBT. Detailed characterizations indicated that the incorporation of PVTP efficiently enriched UO22+ in the probe, which promoted the energy dissipation to UO22+. Besides, UO22+ was also supposed to release PVTP from PVTP⊂Tb-TBT and, thus, exposed the open metal sites to water molecules, which interrupted the sensitization effect of PVTP and induced a nonradiative energy dissipation. A limit of detection (LOD) as low as 0.75 nm was recorded by suspending the PVTP⊂Tb-TBT probe in a water sample, far below the limit in drinking water set by the United States Environmental Protection Agency (130 nm). Furthermore, a remotely controlled sampling and an on-site analysis of real water samples were realized by facilely loading PVTP⊂Tb-TBT on thin films (TFs). The LOD for UO22+ was 2.5 nm by using the TFs. This study reports a new strategy for boosting the sensitivity and selectivity of Ln-MOF to monitor UO22+ and expands the application of the strategy to an on-site analysis.

Highly efficient photosynthesis of hydrogen peroxide in ambient conditions.

Photosynthesis of hydrogen peroxide (H2O2) in ambient conditions remains neither cost effective nor environmentally friendly enough because of the rapid charge recombination. Here, a photocatalytic rate of as high as 114 µmol⋅g-1⋅h-1 for the production of H2O2 in pure water and open air is achieved by using a Z-scheme heterojunction, which outperforms almost all reported photocatalysts under the same conditions. An extensive study at the atomic level demonstrates that Z-scheme electron transfer is realized by improving the photoresponse of the oxidation semiconductor under visible light, when the difference between the Fermi levels of the two constituent semiconductors is not sufficiently large. Moreover, it is verified that a type II electron transfer pathway can be converted to the desired Z-scheme pathway by tuning the excitation wavelengths. This study demonstrates a feasible strategy for developing efficient Z-scheme photocatalysts by regulating photoresponses.

Headspace solid-phase microextraction of semi-volatile ultraviolet filters based on a superhydrophobic metal-organic framework stable in high-temperature steam.

Headspace solid-phase microextraction (HS-SPME) of low volatile analytes from complex aqueous samples can be substantially facilitated by elevating the temperature of the samples. However, many SPME coatings prepared from novel sorptive materials may suffer from low stabilities in hot water steam. Herein, a superhydrophobic metal-organic framework (MOF) derived from decorating the metal-oxo nodes of the amino-functionalized UiO-66(Zr) with phenylsilane was prepared and successfully developed into a novel SPME fiber coating. The highest extraction efficiencies towards the semi-volatile ultraviolet (UV) filters were achieved when the aqueous samples were heated up to 100 °C. It was notable that the lab-made coating exhibited extraordinary stability towards hot water steam, probably because the hydrophobic groups capped on the MOF prevented water molecules from entering and deconstructing its lattice. Even after being treated with water steam under 100 °C for 21 h, the extraction performance of the coating remained unchanged, and the crystal structure of the MOF maintained. Furthermore, a negligible matrix effect was observed even in the samples containing humic acid. Under the optimal extraction and thermal desorption conditions, a method for determining UV filters in aqueous samples was established, which possessed low detection limits (0.6-2.1 ng L-1), wide linear ranges (10-50000 ng L-1), good inter-fiber reproducibility (2.3-6.0%, n = 6), and satisfying intra-fiber repeatability (1.8-5.8%, n = 3). The method was successfully applied in quantifying UV filters in environmental water samples. In addition, the lab-made NH2-UiO-66(Zr)-shp-coated fiber was also suitable for the analysis of polycyclic aromatic hydrocarbons (PAHs). This study provided an effective strategy for preparing MOF coatings that can maintain their crystalline structures and high extraction performances in high-temperature steam.