Studying Lipophilicity Trends of Phosphorus Compounds by 31P-NMR Spectroscopy: A Powerful Tool for the Design of P-Containing Drugs.

Systematically studying the lipophilicity of phosphorus compounds is of great importance for many chemical and biological fields and particularly for medicinal chemistry. Here, we report on the study of trends in the lipophilicity of a wide set of phosphorus compounds relevant to drug design including phosphates, thiophosphates, phosphonates, thiophosphonates, bis-phosphonates, and phosphine chalcogenides. This was enabled by the development of a straightforward log P determination method for phosphorus compounds based on 31P-NMR spectroscopy. The log P values measured ranged between -3.2 and 3.6, and the trends observed were interpreted using a DFT study of the dipole moments and by H-bond basicity (pKHB) measurements of selected compounds. Clear signal separation in 31P-NMR spectroscopy grants the method high tolerability to impurities. Moreover, the wide range of chemical shifts for the phosphorus nucleus (250 to -250 ppm) enables a direct simultaneous log P determination of phosphorus compound mixtures in a single shake-flask experiment and 31P-NMR analysis.

Active and Strippable PVA/Borax/NaBO3 Hydrogel for Effective Containment and Decontamination of Chemical Warfare Agents.

Active gels present unique potential for the decontamination of chemical warfare agents (CWAs) as they strongly adhere to surfaces, thus allowing prolonged decontamination time. Herein, we present a decontamination hydrogel based on polyvinyl alcohol/borax, which contains sodium perborate (NaBO3), as an in situ source of the active ingredient hydrogen peroxide. Developed as a binary formulation, this gel instantly forms and effectively sticks when sprayed on various matrices, including porous and vertically positioned matrices. The gel efficiently detoxified the CWAs sarin (GB), O-ethyl S-2-(diisopropylamino)ethyl methylphosphonothioate (VX), and sulfur mustard (HD) in test tubes (2 µL CWA/0.5 mL gel) to provide nontoxic products with reaction half-lives of <3, 45 and 113 min, respectively. The gel was also shown to efficiently decontaminate surfaces contaminated with VX (5-7 mg, 8-12 mL of gel, i.e., >99%) and to prevent GB evaporation, as proven by laboratory wind tunnel experiments. The universal decontamination abilities of this mild hydrogel, as well as its facile application and removal processes suggest that it holds high potential for future development as a new CWA decontamination tool.

Effective neutralization of chemical warfare agents (HD, VX) by Me-DABCOF: a small molecule with dual action.

The ability of mono N-methyl-1,4-diazabicyclo[2.2.2]octane fluoride (Me-DABCOF, 1) to act as a bifunctional reagent that effectively and universally neutralizes both the persistent and extremely toxic blister agent HD and the nerve agent VX in nearly neutral aqueous solution, alumina powder or a hydrogel formulation, is described.

Oxidative Detoxification of Sulfur-Containing Chemical Warfare Agents by Electrophilic Iodine.

Mild oxidation of sulfur-containing chemical warfare agents was performed in organic medium by electrophilic iodine reagents. Kinetic experiments on sulfur mustard (HD) showed rapid ( t1/2 < 3 min) and selective oxidation to the nonvesicant sulfoxide product (HD-SO) in acetonitrile or propylene carbonate solutions (9% water added) containing excess N-iodosuccinimide (NIS). Molecular iodine solutions in these solvents led to similar results as with NIS but at much slower rates ( t1/2 ∼ 90 min). Higher donor number solvents, such as THF, DMF, or DMSO, showed slower rates with both iodine and NIS. The oxidation of the nerve agent O-ethyl- S-2-( N,N-diisopropylaminoethyl)methylphosphonothioate (VX) selectively to the nontoxic ethyl methylphosphonic acid product exhibited fast rates ( t1/2 = 6 min) using NIS in DMSO solution. In all other solvents tested with VX, rates were slower ( t1/2 ∼ 30-70 min). Oxidation experiments under the same conditions with chloroethyl ethyl sulfide (HD simulant) and O,S-diethyl methylphosphonothioate (VX simulant) led to much faster reaction rates. These transformations are believed to proceed through electrophilic iodine attack on the sulfur moiety and display solvent dependency based on the agents' structural and chemical properties.

Degradation of Sulfur Mustard on KF/Al2O3: The Role of Organic Solvents and Active Species.

Solvent effects on the ability of KF/Al2O3 supports to degrade the warfare agent sulfur mustard (HD) were explored. RP-KF/Al2O3 possessing hydroxide ions and ECUF/KF/Al2O3 holding fluoride ions were examined. Reactions on RP-KF/Al2O3 containing 10 wt % of organic solvents were faster than those on ECUF/KF/Al2O3. Additionally, RP-KF/Al2O3 led to elimination products, while ECUF/KF/Al2O3 mainly led to substitution derivatives. Enlarging the solvent amounts to 90 wt % resulted in decreased reaction rates. The significance of solvent identity/amount and active species is discussed.

Synthesis, Characterization, and Reactivity of Thermally Stable Anhydrous Quaternary Ammonium Fluorides.

The synthesis and properties of a new class of anhydrous quaternary ammonium fluorides, based on the rigid skeleton azabicyclo[2.2.2]octane, is described. Compounds 2a-d were easily prepared by passing the corresponding ammonium iodides over fluoride-based resin followed by drying their hydrated form at 100 or 140 °C under reduced pressure. The stability (experimental and theoretical study), solubility, reactivity, and characterization by solution and solid-state MAS NMR are discussed.

Chemoselective N-Difluoromethylation of Functionalized Tertiary Amines.

A practical, convenient, and general method for the difluoromethylation of tertiary amines, using diethyl bromodifluoromethylphosphonate and fluoride, is described. This commercially available phosphonate smoothly reacts with a fluoride ion to liberate a difluorocarbene intermediate that in the presence of a proton source and a tertiary amine generates the corresponding α-difluoromethylammonium compound in good to excellent yields. Despite the involvement of a difluorocarbene intermediate, this difluoromethylation occurs almost exclusively on the nitrogen atom with diverse molecular structures, including drugs, surfactants, chiral phase transfer catalysts, polymers, ionic liquids, and other fine chemicals. A preliminary assessment of the effects that an α-difluoromethyl groupT has on hydrogen bonding and logP of quaternary ammonium salts is also described.

Solvent Effects on the Reactions of the Nerve Agent VX with KF/Al2O3: Heterogeneous or Homogeneous Decontamination?

Solvent effects on the reactions of the extremely toxic nerve agent VX with KF/Al2O3 powder were explored. Small quantities of water or methanol (5-10 wt %), which effectively mobilized all components while maintaining the heterogeneous nature of the reaction, promoted much faster rates than those obtained with larger quantities. Any amount of acetonitrile resulted in extremely slow transformations. Surprisingly, 5-50 wt % of heptane led to fast reactions due to the combination of its ability to mediate fast diffusion of VX and a MAS centrifugation effect.

Component mobility by a minute quantity of the appropriate solvent as a principal motif in the acceleration of solid-supported reactions.

The effects solvents have on fluoride-promoted heterogeneous hydrolysis and alcoholysis of various organo-phosphorus (OP) compounds on the surface of KF/Al2O3 are described. Solid-state magic angle spinning NMR analyses and SEM microscopy have shown that not only is the identity of the solvent important in these reactions but also its quantity. That is, minimal solvent amounts are favored and much more effective in such solid-supported reactions (and maybe generally) than those featuring solvent-free or excess solvent (>50 wt %) conditions. The addition of a minute quantity of the correct solvent (3-10 wt %, molar equivalent scale) avoids reagents leaching from the matrix, permits mobility (mass transport) of the reaction components and ensures their very high local concentration in close proximity to the solid-support large porous surface area. Accordingly, significant acceleration of reactions rates by orders of magnitude is obtained. Fascinatingly, even challenging phosphoesters with poor leaving groups, which were found to be very stable in the presence of solvent-free KF/Al2O3 or wetted with excess water, were efficiently hydrolyzed with a minute amount of this solvent.

VX fate on common matrices: evaporation versus degradation.

A study of the volatilization rate of the nerve agent VX (O-ethyl S-2-(N,N-diisopropylamino)ethyl methylphosphonothiolate) from various urban matrices in a specially designed climatic chamber (model system) is described. The performance of the model system combined with the analytical procedure produced profiles of vapor concentration obtained from samples of VX dispersed as small droplets on the surfaces of the matrices. The results indicated that the bitumen-containing surfaces such as asphalt blocks and bitumen sheets conserve VX and slow-release part of it over a long period of time. No complete mass balance could be obtained for these surfaces. Influence of environmental and experimental parameters as well as the efficacy of decontamination procedure were also measured. From smooth surface tiles a fast release of VX was measured and almost a complete mass balance was obtained, which characterizes the behavior of inert surfaces. Experiments carried out on concrete blocks showed fast decay of the concentration profile along with a very poor reconstruction of the initial quantity of VX, implying that this matrix degraded VX actively due to its multiple basic catalytic sites. To complement this study, solid-state NMR measurements were compared to add data concerning agent-fate within the matrices.

The reactivity of quaternary ammonium- versus potassium-fluorides supported on metal oxides: paving the way to an instantaneous detoxification of chemical warfare agents.

The reactions of the chemical warfare agents (CWAs) 2,2'-dichloroethyl sulfide (HD), O-ethyl S-2-(diisopropylamino)-ethyl methylphosphonothioate (VX) and isopropyl methylphosphonofluoridate (GB) with various metal oxide-supported quaternary ammonium fluorides (QAF) and/or potassium fluoride (KF) reagents are described. These active sorbents, which were prepared by a modified procedure, include alumina, silica and titania, enriched with "available" (not bound to the surface) fluoride ions. Alumina-based fluoride reagents were found to be more active than their silica or titania counterparts. QAF/Al(2)O(3) reagents, compared to KF/Al(2)O(3), exhibit an exceptional reactivity toward HD, as demonstrated both in reaction rates and product identity. For example, with TBAF, t(1/2) is 15 min for the formation of the elimination product divinyl sulfide (DVS), while with KF, t(1/2) is 10 h for the formation of the hydrolysis product thiodiglycol (TDG). On the other hand, both sorbents reacted similarly against the nerve agents GB or VX. In order to increase the "available" fluoride content on the solid surface, the mixed active sorbent TBAF/KF/Al(2)O(3) (20/20/60) was developed. On this powder, all three CWAs were degraded instantaneously at the low loading of 1 wt% (t(1/2) < 2 min) and rapidly at the higher loadings of 5-10 wt% (t(1/2) of minutes scale). We assume that the relatively large amount of inorganic fluoride (KF) acts synergistically as a reservoir for the more reactive organic fluorides (TBAF). Moreover, the alumina surface hydroxyl groups may also operate as a water reservoir for the hydrolysis of VX or GB. Therefore, TBAF/KF/Al(2)O(3) might be considered as a promising destructive sorbent for CWAs.