Detection of significant liver fibrosis in Chinese psoriasis patients receiving methotrexate: a comparison between transient elastography and liver histology.

INTRODUCTION: Methotrexate (MTX) is effective for treating psoriasis and psoriatic arthritis, but its potential hepatoxicity remains a concern. Liver biopsy, the gold standard for detecting MTX-induced liver injury, is invasive and carries considerable risk. Transient elastography (TE) offers a non-invasive alternative for detecting advanced liver fibrosis. This study investigated the performance of TE in detecting MTX-induced liver fibrosis among Chinese psoriasis patients, compared with liver biopsy. METHODS: This study included adult patients with clinical psoriasis. Liver stiffness measurement using TE was performed in patients receiving MTX. Exclusion criteria were known liver cirrhosis, positive viral hepatitis carrier status, or conditions influencing TE performance. Liver biopsy was performed when liver stiffness was ≥7.1 kilopascals (kPa) or when the total cumulative dose (TCD) of MTX was ≥3.5 g. RESULTS: A total of 228 patients were screened; among 34 patients who met the inclusion criteria, nine (26.5%) had significant liver fibrosis (Roenigk grade ≥3a). The area under the receiver operating characteristic curve was 0.76 (95% confidence interval=0.59-0.93; P=0.021), indicating that TE had satisfactory performance in detecting liver fibrosis. A cut-off value of 7.1 kPa of liver stiffness yielded 100% sensitivity and 68% specificity. Liver fibrosis was not correlated with the TCD of MTX or the duration of MTX use; it was significantly correlated with obesity and diabetes status (body mass index ≥30 kg/m2, waist circumference ≥138 cm, and glycated haemoglobin level ≥7.8%). CONCLUSION: Transient elastography is reliable and superior to the TCD for detecting liver fibrosis in Chinese psoriasis patients receiving MTX. Liver biopsy should be reserved for high-risk patients or patients with liver stiffness ≥11.7 kPa on TE.

Is the use of tobacco products, especially electronic nicotine delivery systems (ENDS), associated with the incidence of oral health outcomes among US adults?

DESIGN: Cohort study. SAMPLE SELECTION: Data were pooled from wave (W) 1 to W5 (2013-2019) of the Population Assessment of Tobacco and Health Study Restricted-Use Files. The W1 cohort respondents were interviewed at all five waves who were aged 18 years and older without a lifetime history of each of the six oral health outcomes (gum disease, precancerous oral lesions, bone loss around teeth, bleeding after brushing or flossing, loose teeth, number of teeth removed because of tooth decay or gum disease). DATA ANALYSIS: Data analysis was performed from October 2021 to September 2022. To assess associations between current established tobacco use and incidence of adverse oral health outcomes at the next wave, adjusted hazard ratios (AHRs) and 95% CIs were calculated using Cox proportional hazards models. RESULTS: Cigarette smoking was positively associated with incidence of gum disease diagnosis (AHR, 1.33; 95% CI, 1.11-1.60), loose teeth (AHR, 1.35; 95% CI, 1.05-1.75), and one or more teeth removed (AHR, 1.43; 95% CI, 1.18-1.74). Smoking any cigars was positively associated with incidence of precancerous oral lesions (AHR, 2.18; 95% CI, 1.38-3.43). Hookah smoking was positively associated with incidence of gum disease diagnosis (AHR, 1.78; 95% CI, 1.20-2.63). Use of electronic nicotine delivery systems (ENDS) was positively associated with incidence of bleeding after brushing or flossing (AHR, 1.27; 95% CI, 1.04-1.54). Snus and smokeless tobacco (excluding snus) were not significantly associated with incidence of gum disease diagnosis or precancerous oral lesions. CONCLUSIONS: This cohort study confirmed associations of current combustible tobacco use with incidence of adverse oral health outcomes. It also showed an association between current ENDS use and incidence of bleeding after brushing or flossing.

Cutaneous manifestations, viral load, and prognosis among hospitalised patients with COVID-19: a cohort study.

INTRODUCTION: Various cutaneous manifestations have been reported as symptoms of coronavirus disease 2019 (COVID-19), which may facilitate early clinical diagnosis and management. This study explored the incidence of cutaneous manifestations among hospitalised patients with COVID-19 and investigated its relationships with viral load, co-morbidities, and outcomes. METHODS: This retrospective study included adult patients admitted to a tertiary hospital for COVID-19 from July to September 2020. Clinical information, co-morbidities, viral load (cycle threshold [Ct] value), and outcomes were analysed. RESULTS: In total, 219 patients with confirmed COVID-19 were included. Twenty patients presented with new onset of rash. The incidence of new rash was 9.1% (95% confidence interval=6.25%-14.4%). The most common manifestations were maculopapular exanthem (n=6, 42.9%, median Ct value: 24.8), followed by livedo reticularis (n=4, 28.6%, median Ct value: 21.3), varicella-like lesions (n=2, 14.3%, median Ct value: 19.3), urticaria (n=1, 7.1%, median Ct value: 14.4), and acral chilblain and petechiae (n=1, 7.1%, median Ct value: 33.1). The median Ct values for patients with and without rash were 22.9 and 24.1, respectively (P=0.58). There were no significant differences in mortality or hospital stay between patients with and without rash. Patients with rash were more likely to display fever on admission (P<0.01). Regardless of cutaneous manifestations, patients with older age, hypertension, and chronic kidney disease stage ≥3 had significantly higher viral load and mortality (P<0.05). CONCLUSION: This study revealed no associations between cutaneous manifestation and viral load or clinical outcomes. Older patients with multiple co-morbidities have risks of high viral load and mortality; they should be closely monitored.

Modelling a Consultant Workforce for the United Kingdom: needs-based planning for Dental Public Health.

OBJECTIVE: To develop a needs-based workforce planning model to explore specialist workforce capacity and capability for the effective, efficient, and safe provision of services in the United Kingdom (UK); and test the model using Dental Public Health (DPH). BASIC RESEARCH DESIGN: Data from a national workforce survey, national audit, and specialty workshops in 2020 and 2021 set the parameters for a safe effective DPH workforce. A working group drawing on external expertise, developed a conceptual workforce model which informed the mathematical modelling, taking a Markovian approach. The latter enabled the consideration of possible scenarios relating to workforce development. It involved exploration of capacity within each career stage in DPH across a time horizon of 15 years. Workforce capacity requirements were calculated, informed by past principles. RESULTS: Currently an estimated 100 whole time equivalent (WTE) specialists are required to provide a realistic basic capacity nationally for DPH across the UK given the range of organisations, population growth, complexity and diversity of specialty roles. In February 2022 the specialty had 53.55 WTE academic/service consultants, thus a significant gap. The modelling evidence suggests a reduction in DPH specialist capacity towards a steady state in line with the current rate of training, recruitment and retention. The scenario involving increasing training numbers and drawing on other sources of public health trained dentists whilst retaining expertise within DPH has the potential to build workforce capacity. CONCLUSIONS: Current capacity is below basic requirements and approaching 'steady state'. Retention and innovative capacity building are required to secure and safeguard the provision of specialist DPH services to meet the needs of the UK health and care systems.

Revealing directed effective connectivity of cortical neuronal networks from measurements.

In the study of biological networks, one of the major challenges is to understand the relationships between network structure and dynamics. In this paper, we model in vitro cortical neuronal cultures as stochastic dynamical systems and apply a method that reconstructs directed networks from dynamics [Ching and Tam, Phys. Rev. E 95, 010301(R) (2017)2470-004510.1103/PhysRevE.95.010301] to reveal directed effective connectivity, namely, the directed links and synaptic weights, of the neuronal cultures from voltage measurements recorded by a multielectrode array. The effective connectivity so obtained reproduces several features of cortical regions in rats and monkeys and has similar network properties as the synaptic network of the nematode Caenorhabditis elegans, whose entire nervous system has been mapped out. The distribution of the incoming degree is bimodal and the distributions of the average incoming and outgoing synaptic strength are non-Gaussian with long tails. The effective connectivity captures different information from the commonly studied functional connectivity, estimated using statistical correlation between spiking activities. The average synaptic strengths of excitatory incoming and outgoing links are found to increase with the spiking activity in the estimated effective connectivity but not in the functional connectivity estimated using the same sets of voltage measurements. These results thus demonstrate that the reconstructed effective connectivity can capture the general properties of synaptic connections and better reveal relationships between network structure and dynamics.

Effects of genipin crosslinking on mechanical cell-matrix interaction in 3D engineered tendon constructs.

It is well known that cells can generate endogenous forces onto the extracellular matrix, but to what extent the mechanical properties of the matrix influences these endogenous cellular forces remains unclear. We therefore sought to quantify the influence of matrix rigidity on cell-matrix interactions by inducing cross-links using increasing concentrations of genipin (0.01-1 mM) or by blocking cross-link formation using beta-aminopropionitrile (BAPN) in engineered human tendon tissue constructs. The cell-matrix mechanics of the tendon constructs were evaluated as cell-generated tissue re-tensioning and stress-relaxation responses using a novel custom-made force monitor, which can apply and detect tensional forces in real-time in addition to mechanical failure testing. Genipin treatment had no influence on the biochemical profile (hydroxyproline, glycosaminoglycan and DNA content) of the constructs and cell viability was comparable between genipin-treated and control constructs, except at the highest genipin concentration. Endogenous re-tension after unloading was significantly decreased with increasing genipin concentrations compared to controls. Mechanical failure testing of tendon constructs showed increased (56%) peak stress at the highest genipin concentration but decreased (72%) with BAPN treatment when compared to controls. Tendon construct stiffness increased with high genipin concentrations (0.1 and 1 mM) and decreased by 70% in BAPN-treated constructs, relative to the controls. These data demonstrate that human tendon fibroblasts regulate their force exertion inversely proportional to increased cross-link capacity but did so independently of matrix stiffness. Overall, these findings support the notion of an interaction between cell force generation and cross-linking, and thus a role for this interplay in mechanical homeostasis of the tissue.

Influence of microcapsule parameters and initiator concentration on the self-healing capacity of resin-based dental composites.

OBJECTIVE: Fracture is one of the main causes for failure of resin-based composite restorations. To overcome this drawback, self-healing resin-based composites have been designed by incorporation of microcapsules. However, the relationship between their self-healing capacity and microcapsule and resin parameters is still poorly understood. Therefore, the objective of this study was to systematically investigate the effect of initiator concentration (in the resin) and microcapsule size and concentration on the self-healing performance of commercially available flowable resin-based composites. METHODS: Poly(urea-formaldehyde) (PUF) microcapsules containing acrylic healing liquid were synthesized in small (33±8µm), medium (68±21µm) and large sizes (198±43µm) and characterized. Subsequently, these microcapsules were incorporated into a conventional flowable resin-based composite (Majesty Flow ES2, Kuraray) at different contents (5-15wt%) and benzoyl peroxide (BPO) initiator concentrations (0.5-2.0wt%). Fracture toughness (KIC) of test specimens was tested using a single edge V-notched beam method. Immediately after complete fracture (KIC-initial), the two fractured parts were held together for 72h to allow for healing. Subsequently, fracture toughness of the healed resin-based composites (KIC-healed) was tested as well. RESULTS: The fracture toughness of healed dental composites significantly increased with increasing microcapsule size and concentration (2wt% BPO, p<0.05). The highest self-healing efficiencies (up to 76%) were obtained with microcapsules sized 198±43 um. SIGNIFICANCE: commercially available resin-based composites can be rendered self-healing most efficiently by incorporation of large microcapsules (198±43µm). However, long-term tests on fatigue and wear behavior are needed to confirm the clinical efficacy.