The Fabrication of Poly(Σ-caprolactone)-Poly(ethylene oxide) Sandwich Type Nanofibers Containing Sericin-Capped Silver Nanoparticles as an Antibacterial Wound Dressing.

In this study, antibacterial, synthetic poly(Σ-caprolactone)-poly(ethylene oxide) (PCL-PEO) multilayer nanofibers were produced by an electrospinning method. The material was synthesized in 3 layers. The upper-lower protective layers were produced by PCL nanofibers and the intermediate layer was produced from PEO nanofiber containing sericin-capped silver nanoparticles (S-AgNPs). The electrospinning conditions in which nano-sized, smooth, bead-free fibers were obtained was determined to be an applied voltage of 20 kV, a flow rate of 8 µL/min and a distance between the collector and the needle tip of 22 cm for the PCL layer (dissolved at a 12% g/mL concentration in a chloroform:methanol (3:2) solvent mixture) layer. For the S-AgNPs doped PEO layer (dissolved at a 3.5% g/mL concentration in water), the corresponding conditions were determined to be 20 kV, 15 µL/min and 20 cm. To characterize the three-layer material that consisted of PCL and S-AgNPs doped PEO layers, FTIR and SEM analyses were performed, and the water retention capacity, in situ degradability and antibacterial activity of the material was investigated. According to SEM analysis, the fibers obtained were found to be nano-sized, smooth and bead-free and the average size of the nanofibers forming the PCL layer was 687 nm while the average size of the fibers forming the PEO layer was 98 nm. Antibacterial activity tests were performed using gram-positive (Staphylococcus aureus ATCC 6538) and gram-negative (Escherichia coli ATCC 25922) bacteria and the resulting biomaterial was found to have antimicrobial effect on both gram-negative and gram-positive bacteria. It was determined that the 3-layer material obtained in this study can be used as a wound dressing.

One-pot facile synthesis of silk sericin-capped gold nanoparticles by UVC radiation: Investigation of stability, biocompatibility, and antibacterial activity.

Herein, an easy one-pot synthesis method for gold nanoparticles (AuNPs), involving only gold salt and sericin extracted from silkworm cocoon in the presence of ultraviolet C (UVC) radiation, was developed. Nanoparticle formation was confirmed by characteristic surface plasmon resonance peaks at 520-540 nm wavelengths, and the influence of silk sericin on enhancing the colloidal stability of AuNPs was confirmed. Transmission electron microscopy examination showed the average size (<10 nm) and size distribution decreased significantly with higher sericin concentration. No antibacterial activity was observed on Gram-positive Bacillus subtilis or Gram-negative Escherichia coli for sole AuNPs (0.065-0.26 mg/ml), but the conjugation of AuNPs with streptomycin antibiotic decreased significantly the required minimum inhibitory concentration doses, as also confirmed with agar plating, Scanning Electron Microscopy and Atomic Force Microscopy analyses. Furthermore, sericin-capped AuNPs showed high cell viabilities (>100%) and no sign of any detectable apoptosis or necrosis in 1-day incubation. Also, high real-time cell proliferation results of AuNPs competitive with positive control groups implied excellent in vitro biocompatibility. These results evidenced that sericin enhanced the colloidal stability of AuNPs and the biological activities of sericin-capped AuNPs reported here could render them suitable nanoscale vehicles for biomedical applications.

High productivity bioethanol fermentation by immobilized Saccharomyces bayanus onto carboxymethylcellulose-g- poly(N-vinyl-2-pyrrolidone) beads.

Crosslinked graft copolymers of CMC with N-vinyl-2-pyrrolidone (N-VP) were prepared in different grafting yields. Saccharomyces bayanus was immobilized in the graft copolymers of carboxymethylcellulose-g-poly(N-vinyl-2-pyrrolidone) (CMC-g-PVP) for ethanol fermentation. The effects of grafting yield, initial glucose concentration, and crosslinker concentration on the yield of ethanol process was investigated. Ethanol production increased when percentage of N-vinyl-2-pyrrolidone in the graft copolymer was increased. The maximum concentration, productivity, and yield of ethanol were 98.78 g L (-1), 8.23 g L (-1) h (-1) and 0.494 g g (-1), respectively. Reusability of the immobilized yeasts was found that the materials can be used seven times without losing their activity.

Improvement of bioethanol productivity of immobilized Saccharomyces bayanus with using sodium alginate-graft-poly(N-vinyl-2-pyrrolidone) matrix.

In this study, immobilization conditions and bioethanol production characteristics of immobilized Saccharomyces bayanus were investigated into sodium alginate-graft-poly(N-vinyl-2-pyrrolidone; NaAlg-g-PVP) matrix. The matrix that crosslinked with calcium clorid was used for immobilization of S. bayanus. Bioethanol productivity of the NaAlg-g-PVP matrix was found to increase from 4.21 to 4.84 gL(-1) h(-1) when compared with the convential sodium alginate matrix. The production of bioethanol was affected by initial glucose concentration and percentage of immobilized cell beads in fermentation medium. Bioethanol productivity was increased from 3.62 to 4.84 gL(-1) h(-1) while the glucose concentration increasing from 50 to 100 gL(-1). Due to the increase in percentage from 10 to 20 % of immobilized cell beads in the fermentation medium, bioethanol productivity was increased from 4.84 to 8.68 gL(-1) h(-1). The cell immobilized NaAlg-g-PVP beads were protected 92 % of initial activity after six repeated fermentation.

Immobilization of Saccharomyces cerevisiae on to modified carboxymethylcellulose for production of ethanol.

In this work, modified carboxymethylcellulose (CMC) was used as a new support material for production of ethanol. Crosslinked graft copolymers of CMC with N-vinyl-2-pyrrolidone (N-VP) were prepared in different grafting yields. The beads material was characterized by means of fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), scanning electron microscope (SEM) and swelling experiment. Saccharomyces cerevisiae was immobilized using entrapment method in the graft copolymers of carboxymethylcellulose-g-poly(N-vinyl-2-pyrrolidone) (CMC-g-PVP) for ethanol fermentation. The effects of grafting yield, initial glucose concentration and crosslinker concentration on the yield of ethanol process were investigated. Reusability of the immobilized yeasts was investigated and found that the materials can be used four times without losing their activity. Ethanol production increased to 59.3 g/L from 46.4 g/L when percentage of N-VP in the graft copolymer was increased. The highest ethanol productivity was found to be 1.75-2.25 g/L h. Fermentation time decreased with the decreasing of crosslinker concentration. The results suggest that the proposed method for immobilization of Saccharomyces cerevisiae has potential in industrial applications for ethanol process.

Selective removal of Cr(VI) ions from aqueous solutions including Cr(VI), Cu(II) and Cd(II) ions by 4-vinyl pyridine/2-hydroxyethylmethacrylate monomer mixture grafted poly(ethylene terephthalate) fiber.

In this study, a new reactively fibrous adsorbent was prepared by grafting 4-vinyl pyridine (4-VP) and 2-hydroxyethylmethacrylate (HEMA) monomer mixture onto poly(ethylene terephthalate) (PET) fibers for removal of Cr(VI), Cu(II) and Cd(II) metal ions from aqueous solution by using batch adsorption method. The influence of various parameters such as graft yield (GY), pH, adsorption time, initial ion concentration and adsorption temperature was investigated. The selectivity of the reactive fiber was also examined. The results show that the adsorbed amount of metal ions followed as given in the order Cr(VI)>Cd(II)>Cu(II). At pH 3, Cr(VI) was removed by 99% while the initial concentration of ions was at 5 mg L(-1) and by 94% at 400 mg L(-1). It was found that the grafted fiber is more selective for Cr(VI) ions in the mixed solution of Cr(VI)-Cu(II), Cr(VI)-Cd(II) and Cr(VI)-Cu(II)-Cd(II) at pH 3 and it was observed that the grafted fibers are stable and regenerable by acid and base without losing their activity.

Studies on the activity and stability of immobilized horseradish peroxidase on poly(ethylene terephthalate) grafted acrylamide fiber.

Having been activated with glutaraldehyde, modified poly(ethylene terephthalate) grafted acrylamide fiber was used for the immobilization of horseradish peroxidase (HRP). Both the free HRP and the immobilized HRP were characterized by determining the activity profile as a function of pH, temperature, thermal stability, effect of organic solvent and storage stability. The optimum pH values of the enzyme activity were found as 8 and 7 for the free HRP and the immobilized HRP respectively. The temperature profile of the free HRP and the immobilized HRP revealed a similar behaviour, although the immobilized HRP exhibited higher relative activity in the range from 50 to 60 degrees C. The immobilized HRP showed higher storage stability than the free HRP.