The revealing of the Cyto-genotoxic properties (Allium and MTT) and the effect of chicken meat quality of characterized zein-eugenol nanofibers.

Electrospun zein-based eugenol nanofibers (ZEnF) with diameters (148.19-631.52 nm) were fabricated. Thermal degradation was found as <15 % until 300 °C while the nanofiber diffraction pattern presented three main peaks among the 5o and 45o positions. ZEnF was not only evaluated as non-toxic to cells but also possessed anticancer characteristics revealing with the MCF-7 cell line at 800 µg/mL (reduction: 18.08 %) and 1600 µg/mL (reduction: 41.64 %). Allium tests revealed that ZEnF did not have any adverse impact on the health status (chromosomes-DNA) of exposed organisms. Following the nanofiber coating for chicken meat parts (thigh and breast), it was observed up to 1.25 log CFU/g limitation in total viable bacteria counts (p < 0.05). The sensory score (difference: 3.64 in 10 points scoring on the 6th day of the cold storage) and odor score of chicken meat samples were found to be as higher than control samples (p < 0.05).

Enhancing microalgae classification accuracy in marine ecosystems through convolutional neural networks and support vector machines.

Accurately classifying microalgae species is vital for monitoring marine ecosystems and managing the emergence of marine mucilage, which is crucial for monitoring mucilage phenomena in marine environments. Traditional methods have been inadequate due to time-consuming processes and the need for expert knowledge. The purpose of this article is to employ convolutional neural networks (CNNs) and support vector machines (SVMs) to improve classification accuracy and efficiency. By employing advanced computational techniques, including MobileNet and GoogleNet models, alongside SVM classification, the study demonstrates significant advancements over conventional identification methods. In the classification of a dataset consisting of 7820 images using four different SVM kernel functions, the linear kernel achieved the highest success rate at 98.79 %. It is followed by the RBF kernel at 98.73 %, the polynomial kernel at 97.84 %, and the sigmoid kernel at 97.20 %. This research not only provides a methodological framework for future studies in marine biodiversity monitoring but also highlights the potential for real-time applications in ecological conservation and understanding mucilage dynamics amidst climate change and environmental pollution.

Construction of a Conductive Polymer/AuNP/Cyanobacteria-Based Biophotovoltaic Cell Harnessing Solar Energy to Generate Electricity via Photosynthesis and Its Usage as a Photoelectrochemical Pesticide Biosensor: Atrazine as a Case Study.

In this research, a cyanobacteria (Leptolyngbia sp.)-based biological photovoltaic cell (BPV) was designed. This clean energy-friendly BPV produced a photocurrent as a result of illuminating the photoanode and cathode electrodes immersed in the aqueous medium with solar energy. For this purpose, both electrodes were first coated with conductive polymers with aniline functional groups on the gold electrodes. In the cell, the photoanode was first coated with a gold-modified poly 4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)benzamine polymer, P(SNS-Aniline). Thioaniline-functionalized gold nanoparticles were used to provide a cross-link formation with bis-aniline conductive bonds with the conductive polymer using electrochemical techniques. Leptolyngbia sp., one of the cyanobacteria that can convert light energy into chemical energy, was attached to this layered electrode surface. The cathode of the cell was attached to the gold electrode surface with P(SNS-Aniline). Then, the bilirubin oxidase (BOx) enzyme was immobilized on this film surface with glutaraldehyde activation. This cell, which can use light, thanks to cyanobacteria, oxidized and split water, and oxygen was obtained at the photoanode electrode. At the cathode electrode, the oxygen gas was reduced to water by the bioelectrocatalytic method. To obtain a high photocurrent from the BPV, necessary optimizations were made during the design of the system to increase electron transport and strengthen its transfer. While the photocurrent value obtained with the designed BPV in optimum conditions and in the pseudosteady state was 10 mA/m2, the maximum power value obtained was 46.5 mW/m2. In addition to storing the light energy of the system, studies have been carried out on this system as a pesticide biosensor. Atrazine biosensing via the BPV system was analytically characterized between 0.1 and 1.2 µM concentrations for atrazine, and a very low detection limit was found as 0.024 µM. In addition, response time and recovery studies related to pesticide biosensor properties of the BPV were also investigated.

Construction of efficient bioelectrochemical devices: Improved electricity production from cyanobacteria (Leptolyngbia sp.) based on π-conjugated conducting polymer/gold nanoparticle composite interfaces.

In this study, gold electrodes (GE) were coated with conducting polymers to obtain a high photocurrent using cyanobacteria from a novel bioelectrochemical fuel cell. For this purpose, 4-(4H-ditiheno[3,2-b:2',3'-d]pyrol-4-yl) aniline and 5-(4H-dithieno[3,2-b:2',3'-d]pyrol-4-yl) napthtalane-1-amine monomers were coated on GE by performing an electropolymerization process. After that, gold nanoparticles (AuNP) were specifically modified by 2-mercaptoethane sulfonic acid and p-aminothiophenol to attach to the electrode surface. The conducting polymers GE coat was modified with functionalized AuNP using a cross-linker. The resulting electrode structures were characterized by cyclic voltammetry and chronoamperometry under on-off illumination using a fiber optic light source. Cyanobacteria Leptolyngbia sp. was added to the GE/conducting polymer/AuNP electrode surface and stabilized by using a cellulose membrane. During the illumination, water was oxidized by the photosynthesis, and oxygen was released. The released oxygen was electrocatalytically reduced at the cathode surface and a 25 nA/cm 2 photocurrent was observed in GE/ Leptolyngbia sp. After the electrode modifications, a significant improvement in the photocurrent up to 630 nA/cm 2 was achieved.

Construction of conducting polymer/cytochrome C/thylakoid membrane based photo-bioelectrochemical fuel cells generating high photocurrent via photosynthesis.

In this study, a photo-bioelectrochemical fuel cell was constructed for photocurrent generation by illuminating the electrodes within an aqueous solution. In this purpose, gold electrode was coated with poly 4-(4H-Dithieno [3,2-b:2',3'-d]pyrol-4-yl) aniline, P(DTP-Ph-NH2) conductive polymer film by using electrochemical polymerization. Then, P(DTP-Ph-NH2) conductive polymer film coated surface was electrochemically modified with cytochrome C which covalently linked onto the surface via bis-aniline functionality of the polymer film and formed crosslinked-structure. The thylakoid membrane was attached on the surface of this electrode by using bissulfosaxinimidyl suberate (BS3) and used as photo-anode in photo-bioelectrochemical fuel cell. The photo-cathode of the photo-bioelectrochemical fuel cell fabrication was followed by the modification of conductive polymer poly[5-(4H-dithieno [3,2-b:2',3'-d]pyrol-4-yl) naphtalene-1-amine] film coating, glutaraldehyde activation, and bilirubin oxidase enzyme immobilization. During the photosynthesis occurring in thylakoid membrane under the light, water was oxidized and separated; while oxygen was released in anode side, the cathode side was reduced the oxygen gas into the water via a bio-electro-catalytic method. The cytochrome C was used for binding of thylakoid membrane to the electrode surface and play an important role for transferring of electrons released as a result of photosynthesis.

Construction of ferrocene modified conducting polymer based amperometric urea biosensor.

Herein, an electrochemical urea sensing bio-electrode is reported that has been constructed by firstly electropolymerizing 4-(2,5-Di(thiophen-2-yl)-1H-pyrrol-1-yl)aniline monomer (SNS-Aniline) on Pencil Graphite Electrode (PGE), then modifying the polymer coated electrode surface with di-amino-Ferrocene (DAFc) as the mediator, and lastly Urease enzyme through glutaraldehyde crosslinking. The effect of pH, temperature, polymer thickness, and applied potential on the electrode current response was investigated besides performing storage and operational stability experiments with the interference studies. The resulting urea biosensor's amperometric response was linear in the range of 0.1-8.5mM with the sensitivity of 0.54µA/mM, detection limit of 12µM, and short response time of 2s. The designed bio-electrode was tested with real human blood and urine samples where it showed excellent analytical performance with insignificant interference.

MIPs and Aptamers for Recognition of Proteins in Biomimetic Sensing.

Biomimetic binders and catalysts have been generated in order to substitute the biological pendants in separation techniques and bioanalysis. The two major approaches use either "evolution in the test tube" of nucleotides for the preparation of aptamers or total chemical synthesis for molecularly imprinted polymers (MIPs). The reproducible production of aptamers is a clear advantage, whilst the preparation of MIPs typically leads to a population of polymers with different binding sites. The realization of binding sites in the total bulk of the MIPs results in a higher binding capacity, however, on the expense of the accessibility and exchange rate. Furthermore, the readout of the bound analyte is easier for aptamers since the integration of signal generating labels is well established. On the other hand, the overall negative charge of the nucleotides makes aptamers prone to non-specific adsorption of positively charged constituents of the sample and the "biological" degradation of non-modified aptamers and ionic strength-dependent changes of conformation may be challenging in some application.

Folic-Acid-Modified Conducting Polymer: Electrochemical Detection of the Cell Attachment.

Here, postfunctionalization and bioapplication of a π-conjugated polymer named 4-[4H-dithieno(3,2-b:2',3'-d)pyrrol-4-yl]aniline (DTP-aryl-NH2 ) are reported, which is successfully synthesized via electropolymerization onto the glassy carbon electrode. Folic acid (FA) is used to modify the amino functional polymer via N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide chemistry for the further steps. The selective adhesion of folate receptor positive cells on the surface is followed by the electrochemical methods. Cyclic voltammetry and electrochemical impedance spectroscopy have been used to characterize stepwise modification of the electroactive surface. After optimization studies such as scan rate during the polymer deposition, FA amount for the efficient surface targeting, incubation time with the cells etc., analytical characterization is carried out. The surface morphologies at each step are imaged by using fluorescence microscopy.

Calixarene assembly with enhanced photocurrents using P(SNS-NH2)/CdS nanoparticle structure modified Au electrode systems.

Two novel calix[n]arene-adorned gold electrodes producing high photocurrent intensities were successfully constructed by embedding gold electrode surfaces with both P(4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)benzenamine) conducting polymer and 4-mercaptoboronic acid-functionalized semiconductor CdS nanoparticles to facilitate the binding of calix[n]arene sulfonic acids with nanoparticles. This structure enabled an electron transfer cascade that both induced effective charge separation and efficiently generated photocurrent. The prepared electrodes were used to generate photocurrent by relying on the host-guest interactions of guests Br3(-) and I3(-), which if positioned well in the system was able to fill electron-hole pairs of CdS nanoparticles. As a result, host calixarene derivatives crucially held Br3(-) and I3(-) ions at a substantial distance from CdS nanoparticles. Furthermore, the effects of various calixarenes on the photocurrent obtained indicate that the generation of photocurrent intensities by the system depends on the cavity sizes of calixarene derivatives, which provide an essential center for Br3(-) and I3(-) ions.

Redox regulation of antioxidant enzymes: post-translational modulation of catalase and glutathione peroxidase activity by resveratrol in diabetic rat liver.

Resveratrol is a strong antioxidant that exhibits blood glucose-lowering effects, which might contribute to its usefulness in preventing complications associated with diabetes. The present study aimed to investigate resveratrol effects on catalase (CAT) and glutathione peroxidase (GPx) gene and protein expression, their phosphorylation states and activities in rat liver of STZ-induced diabetes. Diabetes increased the levels of total protein phosphorylation and p-CAT, while mRNA expression, protein levels, and activity were reduced. Although diabetes induced transcriptional repression over GPx, it did not affect the protein levels and activity. When resveratrol was administered to diabetic rats, an increase in activity was associated with an increase in p-GPx levels. Decrease in Sirtuin1 (SIRT1) and nuclear factor erythroid 2-related factor (Nrf2) and increase in nuclear factor kappa B (NFκB) gene expression in diabetes were associated with a decrease in CAT and GPx mRNA expression. A possible compensatory mechanism for reduced gene expression of antioxidant enzymes is proved to be nuclear translocation of redox-sensitive Nrf2 and NFκB in diabetes which is confirmed by the increase in nuclear and decrease in cytoplasmic protein levels of Nrf2 and NFκB. Taken together, these findings revealed that an increase in the oxidized state in diabetes intricately modified the cellular phosphorylation status and regulation of antioxidant enzymes. Gene regulation of antioxidant enzymes was accompanied by nuclear translocation of Nrf2 and NFκB. Resveratrol administration also activated a coordinated cytoprotective response against diabetes-induced changes in liver tissues.

L-Dopa synthesis catalyzed by tyrosinase immobilized in poly(ethyleneoxide) conducting polymers.

1-3,4-Dihydroxy phenylalanine called as l-Dopa is a precursor of dopamine and an important neural message transmitter and it has been a preferred drug for the treatment of Parkinson's disease. In this study, with regards to the synthesis of L-Dopa two types of biosensors were designed by immobilizing tyrosinase on conducting polymers: thiophene capped poly(ethyleneoxide)/polypyrrole (PEO-co-PPy) and 3-methylthienyl methacrylate-co-p-vinylbenzyloxy poly(ethyleneoxide)/polypyrrole (CP-co-PPy). PEO-co-PPy and CP-co-PPy were synthesized electrochemically and tyrosinase immobilized by entrapment during electropolymerization. L-Tyrosine was used as the substrate for L-Dopa synthesis. The kinetic parameters of the designed biosensors, maximum reaction rate of the enzyme (Vmax) and Michaelis Menten constant (Km) were determined. Vmax were found as 0.007 µmol/(minelectrode) for PEO-co-PPy matrix and 0.012 µmol/(minelectrode) for CP-co-PPy matrix. Km values were determined as 3.4 and 9.2 mM for PEO-co-PPy and CP-co-PPy matrices, respectively. Optimum temperature and pH, operational and shelf life stabilities of immobilized enzyme were also examined.

Electrochemical, photoelectrochemical, and piezoelectric analysis of tyrosinase activity by functionalized nanoparticles.

The electrochemical and photoelectrochemical detection of tyrosinase (TR) activity (an indicative marker for melanoma cancer cells) is reported, using Pt nanoparticles (NPs) or CdS NPs as electrocatalytic labels or photoelectrochemical reporter units. The Pt NPs or CdS NPs are modified with a tyrosine methyl ester, (1), capping layer. Oxidation of the capping layer by TR/O2 yields the respective L-DOPA and dopaquinone products. The reduction of the resulting mixture of products with citric acid yields the L-DOPA derivative,(3), as a single product. The association of the (3)-functionalized Pt NPs or CdS NPs to a boronic acid monolayer-modified electrode enables the electrochemical transduction of TR activity by the Pt-NPs-electrocatalyzed reduction of H2O2 or the photoelectrochemical transduction of TR activity by the generation of photocurrents in the presence of triethanolamine as a sacrificial electron donor. The detection limits for analyzing TR corresponds to 1 U and 0.1 U by the electrochemical and photoelectrochemical methods, respectively. The association of the Pt NPs or CdS NPs to the functionalized monolayer electrode is followed by quartz crystal microbalance measurements.

Immobilization of tyrosinase and alcohol oxidase in conducting copolymers of thiophene functionalized poly(vinyl alcohol) with pyrrole.

Immobilization of tyrosinase and alcohol oxidase is achieved in the copolymer of pyrrole with vinyl alcohol with thiophene side groups (PVATh-co-PPy) which is a newly synthesized conducting polymer. PVATh-co-PPy/alcohol oxidase and PVATh-co-PPy/tyrosinase electrodes are constructed by the entrapment of enzyme in conducting copolymer matrix during electrochemical copolymerization. For tyrosinase and alcohol oxidase enzymes, catechol and ethanol are used as the substrates, respectively. Kinetic parameters: maximum reaction rates (V(max)) and Michaelis-Menten constants (K(m)) are obtained. V(max) and K(m) are found as 2.75 micromol/(minelectrode) and 18 mM, respectively, for PVATh-co-PPy/alcohol oxidase electrode and as 0.0091micromol/(minelectrode) and 40 mM, respectively, for PVATh-co-PPy/tyrosinase electrode. Maximum temperature and pH values are investigated and found that both electrodes have a wide working range with respect to both temperature and pH. Operational and storage stabilities show that although they have limited storage stabilities, the enzyme electrodes are useful with respect to operational stabilities.

Biosensing approach for alcohol determination using immobilized alcohol oxidase.

Alcohol oxidase (AOD) was immobilized in polypyrrole (PPy) and a random copolymer containing 3-methylthienyl methacrylate and p-vinylbenzyloxy poly(ethyleneoxide) matrices. Immobilization of enzyme was performed via entrapment in conducting polymers during electrochemical polymerization of pyrrole through the thiophene moiety of the copolymer. Three different alcohols, namely methanol, ethanol and n-propanol, were used as substrates. Maximum reaction rates, Michaelis-Menten constants, optimum temperature and pH values, operational stabilities and shelf life of the enzyme electrodes were investigated.

Immobilization of glucose oxidase in conducting graft copolymers and determination of glucose amount in orange juices with enzyme electrodes.

Glucose oxidase was immobilized in conducting copolymers of three different types of poly(methyl methacrylate-co-thienyl methacrylate). Immobilization of enzyme was carried out by the entrapment in conducting polymers during electrochemical polymerization of pyrrole on the copolymer electrodes. Maximum reaction rate, Michaelis-Menten constants, temperature, pH and operational stabilities were determined for immobilized enzyme. The amount of glucose in orange juices of Turkey was investigated by using enzyme electrodes.