Enhanced OER catalytic activity of single metal atoms supported by the pentagonal NiN2 monolayer: insight from density functional theory calculations.

Two-dimensional material-supported single metal atom catalysts have been extensively studied and proved effective in electrocatalytic reactions in recent years. In this work, we systematically investigate the OER catalytic properties of single metal atoms supported by the NiN2 monolayer. Several typical transition metals with high single atom catalytic activity, such as Fe, Co, Ru, Rh, Pd, Ir, and Pt, were selected as catalytic active sites. The energy calculations show that transition metal atoms (Fe, Co, Ru, Rh, Pd, Ir, and Pt) are easily embedded in the NiN2 monolayer with Ni vacancies due to the negative binding energy. The calculated OER overpotentials of Fe, Co, Ru, Rh, Pd, Ir and Pt embedded NiN2 monolayers are 0.92 V, 0.47 V, 1.13 V, 0.66 V, 1.25 V, 0.28 V, and 0.94 V, respectively. Compared to the 0.57 V OER overpotential of typical OER noble metal catalysts IrO2, Co@NiN2 and Ir@NiN2 exhibit high OER catalytic activity due to lower overpotential, especially for Ir@NiN2. The high catalytic activity of the Ir embedded NiN2 monolayer can be explained well by the d-band center model. It is found that the adsorption strength of the embedded TM atoms with intermediates follows a linear relationship with their d-band centers. Besides, the overpotential of the Ir embedded NiN2 monolayer can be further reduced to 0.24 V under -2% biaxial strain. Such findings are expected to be employed in more two-dimensional material-supported single metal atom catalyzed reactions.

How spin state and oxidation number of transition metal atoms determine molecular adsorption: a first-principles case study for NH3.

Understanding how the electronic state of transition metal atoms can influence molecular adsorption on a substrate is of great importance for many applications. Choosing NH3 as a model molecule, its adsorption behavior on defected SnS2 monolayers is investigated. The number of valence electrons n is controlled by decorating the monolayer with different transition metal atoms, ranging from Sc to Zn. Density-Functional Theory based calculations show that the adsorption energy of NH3 molecules oscillates with n and shows a clear odd-even pattern. There is also a mirror symmetry of the adsorption energies for large and low electron numbers. This unique behavior is mainly governed by the oxidation state of the TM ions. We trace back the observed trends of the adsorption energy to the orbital symmetries and ligand effects which affect the interaction between the 3σ orbitals (NH3) and the 3d orbitals of the transition metals. This result unravels the role which the spin state of TM ions plays in different crystal fields for the adsorption behavior of molecules. This new understanding of the role of the electronic structure on molecular adsorption can be useful for the design of high efficiency nanodevices in areas such as sensing and photocatalysis.

The Role of Water Molecules on Polaron Behavior at Rutile (110) Surface: A Constrained Density Functional Theory Study.

Understanding the behavior of a polaron in contact with water is of significant importance for many photocatalytic applications. We investigated the influence of water on the localization and transport properties of polarons at the rutile (110) surface by constrained density functional theory. An excess electron at a dry surface favors the formation of a small polaron at the subsurface Ti site, with a preferred transport direction along the [001] axis. As the surface is covered by water, the preferred spatial localization of the polarons is moved from the subsurface to the surface. When the water coverage exceeds half a monolayer, the preferred direction of polaron hopping is changed to the [110] direction toward the surface. This characteristic behavior is related to the Ti3d-orbital occupations and crystal field splitting induced by different distorted structures under water coverage. Our work describes the reduced sites that might eventually play a role in photocatalysis for rutile (110) surfaces in a water environment.

Proximity effects in graphene-supported single-atom catalysts for hydrogen evolution reaction.

The interaction between adjacent active sites is crucial to balance the efficiency and utilization of functional atoms in single-atom catalysts. Herein, the catalytic activity of hydrogen evolution reaction at different site (nitrogen coordinated transition metal centers embedded in graphene) distances was comprehensively investigated by density functional theory calculations. The results show that a proximity effect of reactivity and site spacing can be identified in the Co-series single-atom catalysts. Although the proximity effect is more linearly responded with the site spacing along x direction, an optimal distance of ∼0.8 and ∼2.8 nm are found for Co and Rh, Ir atoms, respectively. An in-depth analysis of the electronic property reveals that the proximity effect is caused by the distinct net charge of the active site, which is affected by the dz2 position relative to EF. Subsequently, an excess electron nodal channel in x direction was found to serve as a communication pathway between the active sites. Through the finding in this work, an optimal Fe-N2C2 structure was deliberately designed and has shown prominent proximity effect as Co-series do. The results reported in this work provide a simple and effective tuning method for the reactivity of a single-atom catalyst.

InN/XS2 (X = Zr, Hf) vdW heterojunctions: promising Z-scheme systems with high hydrogen evolution activity for photocatalytic water splitting.

Z-scheme van der Waals heterojunctions are very attractive photocatalysts attributed to their excellent reduction and oxidation abilities. In this paper, we designed InN/XS2 (X = Zr, Hf) heterojunctions and explored their electronic structure properties, photocatalytic performance, and light absorption systematically using first-principles calculations. We found that the valence-band maximum (VBM) and conduction-band minimum (CBM) of the InN/XS2 (X = Zr, Hf) heterojunctions are contributed by InN and XS2, respectively. Photo-generated carriers transferring along the Z-path can accelerate the recombination of interlayer electron-hole pairs. Therefore, the photogenerated electrons in the CBM of the InN layer can be maintained making the hydrogen evolution reaction occur continuously, while photogenerated holes in the VBM of the Ti2CO2 layer make the oxygen evolution reaction occur continuously. The band edge positions of heterojunctions can straddle the required water redox potentials, while pristine InN and XS2 (X = Zr, Hf) can only be used for photocatalytic hydrogen evolution or oxygen evolution, respectively. Furthermore, the HER barriers can be tuned by transition metal doping. With Cr doping, the hydrogen evolution reaction (HER) barriers decrease to -0.12 for InN/ZrS2 and -0.05 eV for InN/HfS2, very close to the optimal value (0 eV). In addition, the optical absorption coefficient is as high as 105 cm-1 in the visible and ultraviolet regions. Therefore, the InN/XS2 (X = Zr, Hf) heterojunctions are expected to be excellent photocatalysts for water splitting.

Oxygen Vacancy Diffusion in Rutile TiO2: Insight from Deep Neural Network Potential Simulations.

Defects play a crucial role in the surface reactivity and electronic engineering of titanium dioxide (TiO2). In this work, we have used an active learning method to train deep neural network potentials from the ab initio data of a defective TiO2 surface. Validations show a good consistency between the deep potentials (DPs) and density functional theory (DFT) results. Therefore, the DPs were further applied on the extended surface and executed for nanoseconds. The results show that the oxygen vacancy at various sites are very stable under 330 K. However, some unstable defect sites will convert to the most favorable ones after tens or hundreds of picoseconds, while the temperature was elevated to 500 K. The DP predicated barriers of oxygen vacancy diffusion were similar to those of DFT. These results show that machine-learning trained DPs could accelerate the molecular dynamics with a DFT-level accuracy and promote people's understanding of the microscopic mechanism of fundamental reactions.

P-block atom modified Sn(200) surface as a promising electrocatalyst for two-electron CO2 reduction: a first-principles study.

Low activity and poor product selectivity of CO2 reduction have seriously hampered its further practical application. Introducing p-block atoms to the catalyst is regarded as a promising strategy due to the versatility of p orbitals and diversity of p-block elements. Here, we systematically studied the influence of p-block atom X (X = C, N, O, S, and Se) on CO2 catalytic properties on a Sn(200) surface by first-principles calculation. Our work shows that all the p-block atoms are relative stable with Ef in the range of -5.11 to -3.59 eV. Further calculation demonstrates that the diversity of the p-block atoms results in unique CO2 electrocatalytic activity and product selectivity. Interestingly, the p-block C atom shows bi-functional activity to form two-electron products HCOOH and CO, with the corresponding energy barriers remarkably low at about 0.19 eV and 0.28 eV. In particular, the p-block S(Se) atom appears to have striking HCOOH selectivity, with the energy barrier to form HCOOH only a quarter of that to form the CO product. This unusual behavior is mainly attributed to the adsorption strength and frontier orbital interaction between the p-block atom and intermediates. These findings can effectively provide a valuable insight into the design of highly efficient CO2 electrocatalyst.

The unique photoelectronic properties of the two-dimensional Janus MoSSe/WSSe superlattice: a first-principles study.

Designing photocatalysts with suitable band alignment and considerable carrier mobility is extremely important. Here, by means of first-principles calculation, we systematically investigated the structural, photoelectronic, and carrier mobility behavior of the two-dimensional Janus MoSSe/WSSe superlattice. The results show that both armchair-type (AN-SL) and zigzag-type (ZN-SL) superlattices are relatively stable with negative Ef values in the range of -2.35 to -1.16 eV. Band gap and band edge position calculations demonstrate that these superlattices are completely suitable for water splitting by visible light. Particularly, the interface contact of the superlattice can be spontaneously changed from type-I to type-II when N > 4, facilitating separation of photogenerated carriers. Furthermore, the hole carrier mobility (µh) in AN-SL can be effectively regulated from 1200 to 2200 cm2 V-1 s-1, much larger than that of the isolated components. Interestingly, the disparity of hole/electron carrier mobility is remarkably large with an approximately 20-fold difference, showing the potential in prohibiting the recombination of photogenerated carriers. This unique behavior is further illustrated by the relaxation times of carriers, where the lifetime of hole carriers is about 7 times larger than that of electron carriers. These findings suggest that forming a Janus superlattice is a promising approach for regulating the photoelectronic properties of semiconductors, providing a promising way to design high efficiency photocatalysts.

Crucial Role of Crystal Field on Determining the Evolution Process of Janus MoSSe Monolayer: A First-Principles Study.

Two-dimensional Janus MXY materials have been successfully synthesized from their parent species by CVD, SEAR, or PLD techniques. However, their detailed evolution process and underlying atomistic mechanism are far from understood conclusively, which are prompts for further research. Here, taking Janus MoSSe as a representation, the evolution process from MoS2 is systematically investigated by first-principles calculation. The simulation shows that the lowest formation energy of MoS(2-δ)Seδ increases with selenylation ratio δ. Unexpectedly, Se atoms prefer to form a pair in next-nearest neighboring state (Se-NN-Se), eventually transferred into a growth rule of (6n + 1) during the evolution process. Particularly, it is demonstrated that the stability of the intermediate is mainly governed by the Mo 4d orbitals in different distorted triangular crystal fields, rendering a different degree of orbital splitting. Both the occupied and unoccupied Mo 4d orbitals of Se-NN-Se are farther from the Fermi level than other cases, which is clearly illustrated by d-band center theory. These findings will be helpful to understand the evolution process and the underlying atomistic mechanism of Janus MXY.

The role of permanent and induced electrostatic dipole moments for Schottky barriers in Janus MXY/graphene heterostructures: a first-principles study.

The Schottky barrier height (ESBH) is a crucial factor in determining the transport properties of semiconductor materials and it directly regulates the carrier mobility in opto-electronics devices. In principle, van der Waals (vdW) Janus heterostructures offer an appealing avenue for controlling the ESBH. However, the underlying atomistic mechanisms are far from understood conclusively, which prompts further research in the topic. To this end, here we carry out an extensive first-principles study of the electronic properties and ESHB of several vdW Janus MXY/graphene (M = Mo, W; X, Y = S, Se, Te) heterostructures. The results of the simulations show that by changing the composition and geometry of the heterostructure's interface, it is possible to control its electrical contact, and thence electron transport properties, from ohmic to Schottky with up to a factor seven variation in the ESBH. Detailed analysis of the simulations enables rationalization of this highly attractive property on the basis of the interplay between the permanent dipole moment of the Janus MXY sheet and the induced one due to interfacial charge redistribution at the MXY/Gr interface. Such an interplay is shown to be highly effective in altering the electrostatic potential difference across the vdW Janus heterostructure, determining its ESBH, and thence Schottky (ohmic) contact type. These computational findings contribute guidelines to control the electrical contacts in Janus heterostructures towards the rational design of electrical contacts in nanoscale devices.

The unique carrier mobility of monolayer Janus MoSSe nanoribbons: a first-principles study.

Charge-carrier mobility is a determining factor of the transport properties of semiconductor materials and is strongly related to the optoelectronic performance of nanoscale devices. Here, we investigate the electronic properties and charge carrier mobility of monolayer Janus MoSSe nanoribbons by means of first-principles simulations coupled with deformation potential theory. These simulations indicate that zigzag nanoribbons are metallic. Conversely, armchair nanoribbons are semiconducting and show oscillations in the calculated band gap as a function of edge-width according to the 3p < 3p + 1 < 3p + 2 rule, with p being the integer number of repeat units along the non-periodic direction of the nanoribbon. Although the charge-carrier mobility of armchair nanoribbons oscillates with the edge-width, its magnitude is comparable to its two-dimensional sheet counterpart. A robust room-temperature carrier mobility is calculated for 3.5 nm armchair nanoribbons with values ranging from 50 cm2 V-1 s-1 to 250 cm2 V-1 s-1 for electrons (e) and holes (h), respectively. A comparison of these values with the results for periodic flat sheet (e: 73.8 cm2 V-1 s-1; h: 157.2 cm2 V-1 s-1) reveals enhanced (suppressed) hole (electron) mobility in the Janus MoSSe nanoribbons. This is in contrast to what was previously found for MoS2 nanoribbons, namely larger mobility for electrons in comparison with holes. These differences are rationalized on the basis of the different structures, edge electronic states and deformation potentials present in the MoSSe nanoribbons. The present results provide the guidelines for the structural and electronic engineering of MoSSe nanoribbon edges towards tailored electron transport properties.

Activity and selectivity of CO2 photoreduction on catalytic materials.

Photoreduction of molecular CO2 by solar light into added-value fuels or chemical feedstocks is an appealing strategy to simultaneously overcome environmental problems and energy challenges. However, multiple reaction steps and a large number of possible products have significantly hindered the development of highly selective catalysts capable of delivering CO2 conversion with high efficiency. Recently, several strategies associated with different conversion mechanisms have been proposed to improve the activity and product selectivity of CO2 photocatalysts. These are based on development of low dimensional nanomaterials, defect or facet engineering, design of tailored heterostructures, and carrier conductivity enhancement. In spite of impressive progress in the field, real-world applications are yet to be delivered. To sustain further research in this promising field, here we provide a short frontier of recent advances in activity and selectivity of CO2 reduction photocatalysts, together with a critical discussion of further avenues of research in this field.

A promising blue phosphorene/C2N van der Waals type-II heterojunction as a solar photocatalyst: a first-principles study.

An appropriate band structure and effective carrier separation are very important for the performance of a solar photocatalyst. In this paper, based on first-principles calculations, it was predicted that blue phosphorene (BlueP) and a C2N monolayer can form a promising metal-free type-II heterojunction. The electronic structure of the BlueP/C2N heterojunction facilitated the overall water splitting reactions well. The projected band structure showed that the conduction band edge was contributed by C2N and the valence band edge was dominated by BlueP. Under the combination of the driving force of the band offset and the built-in electric field between the two layers, the photo-generated electrons and holes were transferred spontaneously to the conduction band of C2N and the valence band of BlueP, respectively. An effective carrier separation in the heterostructure was thus achieved. More notably, the obtained light absorption of the BlueP/C2N junction showed an obvious red-shift, which greatly extended the area of light adsorption to the visible light region. We further proposed that strain could also be used to modulate the band gap and the band edge positions of the heterojunction. Our results not only provide a theoretical design, but also reveal the fundamental separation mechanism of the photo-generated carriers in the BlueP/C2N heterojunction.

Site dependent reactivity of Pt single atoms on anatase TiO2(101) in an aqueous environment.

The TiO2-Pt-water interface is of great relevance in photocatalysis where Pt is widely used as a co-catalyst for enhancing hydrogen evolution in aqueous TiO2. Using ab initio molecular dynamics, we investigated this interface focusing on Pt single atoms supported on anatase TiO2(101) in a water environment. Based on recent experiments showing a broad distribution of Pt coordination sites in TiO2, we examined six distinct single-Pt supported species with different nominal Pt oxidation states, namely: Pt, PtOH, and PtO2 species adsorbed on the stoichiometric surface; Pt adsorbed at a surface oxygen vacancy (Ov); and Pt substituting a surface Ti cation (PtTi), both without and with an accompanying Ov (PtTi + Ov). As found for the pristine anatase surface, interfacial water remained intact in the presence of a nearly neutral Pt adatom within the time duration of our simulations (∼15 ps). Similarly, no (or only temporary) water dissociation was observed at the PtTi + Ov and PtO2 interfaces, due to the formation of very stable planar Pt coordination structures that interact only weakly with water. In contrast, water dissociated with OH- (H+) on the Pt atom when this substituted a surface Ti (oxygen) ion as well as on PtOH. The significant proton affinity of Pt atoms at surface oxygen vacancies suggests that negatively charged Pt species are particularly efficient at catalyzing hydrogen evolution in aqueous TiO2.

Defects, Adsorbates, and Photoactivity of Rutile TiO2 (110): Insight by First-Principles Calculations.

We investigate the effect of adsorbates on the structure and photoabsorption of reduced TiO2 by first-principles calculations of rutile TiO2(110) in the presence of both titanium interstitials (Tiint's) and adsorbed water or methanol. Our results show that while Tiint's prefer to reside in deep inner layers when the surface is clean, they tend to diffuse toward the surface in the presence of water or methanol. This migration is due to the mutual stabilization of the adsorbates and Tiint defects in the near-surface region. We also find that adsorbed water/methanol changes the orbital character and localization sites of the excess electrons associated with the Tiint. These results can explain why the adsorption of water and methanol enhances the photoabsorption of the reduced TiO2(110) surface.

Self-hydrogenated shell promoting photocatalytic H2 evolution on anatase TiO2.

As one of the most important photocatalysts, TiO2 has triggered broad interest and intensive studies for decades. Observation of the interfacial reactions between water and TiO2 at microscopic scale can provide key insight into the mechanisms of photocatalytic processes. Currently, experimental methodologies for characterizing photocatalytic reactions of anatase TiO2 are mostly confined to water vapor or single molecule chemistry. Here, we investigate the photocatalytic reaction of anatase TiO2 nanoparticles in water using liquid environmental transmission electron microscopy. A self-hydrogenated shell is observed on the TiO2 surface before the generation of hydrogen bubbles. First-principles calculations suggest that this shell is formed through subsurface diffusion of photo-reduced water protons generated at the aqueous TiO2 interface, which promotes photocatalytic hydrogen evolution by reducing the activation barrier for H2 (H-H bond) formation. Experiments confirm that the self-hydrogenated shell contains reduced titanium ions, and its thickness can increase to several nanometers with increasing UV illuminance.

Electronic structure and photoabsorption of Ti3+ ions in reduced anatase and rutile TiO2.

We have used two-photon photoemission (2PPE) spectroscopy and first-principles density functional theory calculations to investigate the electronic structure and photoabsorption of the reduced anatase TiO2(101) and rutile TiO2(110) surfaces. 2PPE measurements on anatase (101) show an excited resonance induced by reduced Ti3+ species centered around 2.5 eV above the Fermi level (EF). While this state is similar to that observed on the rutile (110) surface, the intensity of the 2PPE peak is much weaker. The computed oscillator strengths of the transitions from the occupied gap states to the empty states in the conduction band show peaks between 2.0 and 3.0 eV above the conduction band minimum (CBM) on both surfaces, confirming the presence of empty Ti3+ resonances at these energies. Although the crystal field environment of Ti ions is octahedral in both rutile and anatase, Ti3+ ions exhibit distinct d orbital splittings due to different distortions of the TiO6 units. This affects the directions of the transition dipoles from the gap states to the conduction band, explaining the polarization dependence of the 2PPE signal in the two materials. Our results also show that the Ti3+ induced states in the band gap are shallower in anatase than in rutile. The d → d transitions from the occupied gap states to the empty Ti3+ excited states in anatase can occur at energies well below 3 eV, consistent with the observed visible-light photocatalytic activity of Ti3+ self-doped anatase.

Radiotherapy induces cell cycle arrest and cell apoptosis in nasopharyngeal carcinoma via the ATM and Smad pathways.

Nasopharyngeal carcinoma (NPC) is a common malignant neoplasm of the head and neck which is harmful to human's health. Radiotherapy is commonly used in the treatment of NPC and it induces immediate cell cycle arrest and cell apoptosis. However, the mechanism remains unknown. Evidences suggested the activation of Ataxia telangiectasia mutated (ATM) pathway and Smad pathway are 2 of the important crucial mediators in the function of radiotherapy. In this study, we performed in vitro assays with human nasopharyngeal carcinoma CNE-2 cells and in vivo assays with nude mice to investigate the role of the ATM and Smad pathways in the treatment of nasopharyngeal carcinoma with radiotherapy. The results suggested that radiation induced activation of ATM pathway by inducing expression of p-ATM, p-CHK1, p-CHK2, p15 and inhibiting expression of p-Smad3. In addition, Caspase3 expression was increased while CDC25A was decreased, leading to cell cycle arrest and cell apoptosis. On the other hand, activation of Smad3 can inhibited the ATM pathway and attenuated the efficacy of radiation. In summary, we suggest that both ATM and Smad pathways contribute to the cell cycle arrest and cell apoptosis during nasopharyngeal carcinoma cells treated with radiation.

Tuning band gaps and optical absorption of BiOCl through doping and strain: insight form DFT calculations.

Bismuth oxyhalides (BiOX, X = Cl, Br, and I) are a new family of promising photocatalysts. BiOCl and BiOBr possess large band gaps and weak absorption in visible light regions, which limit their applications. Although the band gap of BiOI is suitable to absorb most of the visible light, its redox capability is very weak. In this work, the doping and strain effects on the electronic structures and optical properties of BiOCl are explored using first principle calculations. The results show that doping in BiOCl, especially co-doping of Sb and I atoms, can obviously decrease the band gaps along with enhancing the optical absorption coefficients of pristine BiOCl because of the electronegativity difference between Sb/I atoms and Bi/Cl atoms. Meanwhile the band gap of BiOCl can be tuned under strain. This work offers potential strategies to enhance BiOCl absorption coefficients in the visible light region and its photocatalyst activity.

Spatial separation of photo-generated electron-hole pairs in BiOBr/BiOI bilayer to facilitate water splitting.

The electronic structures and photocatalytic properties of bismuth oxyhalide bilayers (BiOX1/BiOX2, X1 and X2 are Cl, Br, I) are studied by density functional theory. Briefly, their compositionally tunable bandgaps range from 1.85 to 3.41 eV, suitable for sun-light absorption, and all bilayers have band-alignments good for photocatalytic water-splitting. Among them, heterogeneous BiOBr/BiOI bilayer is the best as it has the smallest bandgap. More importantly, photo-excitation of BiOBr/BiOI leads to electron supply to the conduction band minimum with localized states belonging mainly to bismuth of BiOBr where the H(+)/H2 half-reaction of water-splitting can be sustained. Meanwhile, holes generated by such photo-excitation are mainly derived from the iodine states of BiOI in the valence band maximum; thus, the O2/H2O half-reaction of water splitting is facilitated on BiOI. Detailed band-structure analysis also indicates that this intriguing spatial separation of photo-generated electron-hole pairs and the two half-reactions of water splitting are good for a wide photo-excitation spectrum from 2-5 eV; as such, BiOBr/BiOI bilayer can be an efficient photocatalyst for water-splitting, particularly with further optimization of its optical absorptivity.