Effective reduction on flame soot via plasma coupled with carbon dioxide.

This study explored the impact of non-thermal plasma and CO2 on the flame soot characteristics within the diffusion flames. We analyzed on flame structures that were diluted with either CO2 or N2, temperature distributions, and soot characteristics, both in the presence and absence of plasma. Due to the higher specific heat capacity of CO2 compared to N2, the optical observations consistently showed lower temperatures in flames diluted with CO2 as compared to those diluted with N2. The inclusion of plasma and carbon dioxide resulted in the lowest soot concentration, indicating that plasma coupled with CO2 has a synergistic inhibitory effect on soot emissions. The findings revealed that when CO2 was used to dilute the flames and the oxygen concentration was low, the soot nanostructure appeared amorphous. Raman results showed that the level of graphitization observed in soot particles from CO2 dilution flames was lower than that from N2 dilution flames. In the presence of plasma and CO2, the soot obtained exhibited the shortest fringe length and the highest fringe tortuosity. Significant correlations were observed between the nanostructure of soot and its reactivity. The combined application of plasma and CO2 proved to be effective in reducing the soot carbonization degree.

Formation and Evolution of Soot in Ethylene Inverse Diffusion Flames in Ozone Atmosphere.

Ozone is a prospective additive for enhancing and controlling combustion under lean or very lean conditions, and reduces NOx and particulate matter emissions simultaneously. Typically, in studying the effects of ozone on combustion pollutants, the focus is on the final yield of pollutants, while its detailed effects on the soot formation process remain unknown. Here, the formation and evolution profiles of soot containing morphology and nanostructures in ethylene inverse diffusion flames with different ozone concentration additions were experimentally studied. The surface chemistry and oxidation reactivity of soot particles were also compared. The soot samples were collected by a combination of the thermophoretic sampling method and deposition sampling method. High-resolution transmission electron microscopy analysis, X-ray photoelectron spectroscopy and thermogravimetric analysis were applied to obtain the soot characteristics. The results showed that soot particles experienced inception, surface growth, and agglomeration in the ethylene inverse diffusion flame within a flame axial direction. The soot formation and agglomeration were slightly advanced since the ozone decomposition contributed to promoting the production of free radicals and active substances in the ozone added flames. The diameter of primary particles in the flame with ozone addition was larger. With the increase of ozone concentration, the content of soot surface oxygen increased and the ratio of sp2/sp3 decreased. Furthermore, the addition of ozone increased the volatile content of soot particles and improved soot oxidation reactivity.

Edge Effects on Simultaneous Reconstructions of Flame Temperature and Soot Volume Fraction Profiles by a CCD Camera.

In this paper, the influence of the edge effect on the simultaneous reconstruction of axisymmetric flame temperature and soot volume fraction profiles by a single CCD camera was investigated in detail. The reconstruction accuracy of the flame temperature profile and soot volume fraction was insensitive to the measurement error of the coefficient matrix. When the signal to ratio (SNR) of the measurement system for both the radiation intensity and coefficient matrix was as low as 46 dB, the reconstruction accuracy for both temperature and soot volume fraction was acceptable and was more influenced by the radiation intensity measurement error. The reconstruction of the flame temperature and soot volume fraction was greatly influenced by the edge effect. When the flame edge with weak radiation signals was ignored during the reconstruction, the relative reconstruction error for the temperature and soot volume fraction increased from the flame center to the edge, and reached an unacceptable value at the reconstruction boundary, especially for the soot volume fraction. The flame image boundary could be chosen as the unified reconstruction boundary to reconstruct the two-dimensional distribution of the temperature and soot volume fraction with satisfactory accuracy. The low soot volume fraction could influence the reconstruction accuracy for both the temperature and soot concentration in non-sooting regions. Moreover, there was no obvious regularity between the reconstruction accuracy of the temperature and soot volume fraction and the extension of the reconstruction boundary.

Quantitative optical diagnostics on macroscopic soot onset for ethylene diffusion flames with ethyl ester addition.

A novel quantitative optical diagnostics method for determining the threshold of soot onset in counterflow diffusion flames was proposed and demonstrated. The method was based on the proportional discrimination of trichromatic luminescence and the nonparametric and unsupervised automatic threshold selection algorithm. The macroscopic soot onset threshold in ethylene diffusion flame with three ethyl esters additions could be precisely determined. It was found that the undesirable soot onset phenomenon for ethylene diffusion flames was significantly suppressed with ethyl ester addition. The method proposed here will be useful as a reference for soot diagnostics in other flames.

Effects of diluent gases on sooting transition process in ethylene counterflow diffusion flames.

The impacts of adding diluent gases (nitrogen, carbon dioxide, and helium) either to the fuel side or the oxidizer side on the sooting transition process in ethylene counterflow diffusion flames are investigated experimentally and numerically. A series of ethylene flames ranging from non-sooting to heavy-sooting are studied by gradually increasing the oxygen concentration on the oxidizer side. The optical method is used to analyze flame images, determining the sooting transition process. It is found that whether CO2 is added to the fuel side or the oxidizer side, the sooting transition process is delayed significantly. This process is slightly delayed when He is added to the fuel side, however, it is promoted when He is introduced to the oxidizer side. The numerical results show that in CO2-diluted flames, the mole fraction of the main soot precursors C2H2, C3H3, and C6H6 are reduced, which leads to the delay of soot formation. In addition, the H radical decreases while the OH radical increases, both of them are important for soot formation. In He-diluted flames, the concentration of C2H2, C3H3, and C6H6 decreased, as well as H and OH radicals. Moreover, adding He obviously changes the distribution area of products.

Soot reduction by addition of dimethyl carbonate in normal and inverse ethylene diffusion flames: Nanostructural evidence.

Oxygenated fuel represents an attractive alternative as an additive for reducing soot emissions. Dimethyl carbonate (DMC) is an oxygenated compound which is a good option to reduce soot, but the detailed characteristics of soot produced from combustion of hydrocarbon fuels blended with DMC are still lacking. The present research studied the nanostructure and reactivity of soot particles in ethylene/DMC normal and inverse diffusion flames. High resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) were used to analyze the nanostructure and reactivity of soot. It was found that DMC addition was effective in decreasing the average weights of soot formed in flames. The results of HRTEM images showed that soot particles obtained with DMC addition showed liquid-like material and tight bonding, and exhibited more highly disorganized layers, which give it higher reactivity than soot obtained without DMC addition. Furthermore, HRTEM was used to analyze soot fringe characteristics consisting of fringe tortuosity, fringe length, and fringe separation. XRD was used to crosscheck the results for fringe separation, and was consistent with HRTEM results. In addition, the mass loss curve of TGA experiments showed that DMC addition could enhance the reactivity of soot particles.