Isolation and characterization of bioactive polyacetylenes Panax ginseng Meyer roots.

Panax ginseng has been studied for its chemo-preventive properties and pharmaceutical potential. Polyacetylenic compounds isolated from Panax ginseng root typically comprised of non-polar C17 compound have been reported to exhibit bioactive properties. The objective of this project is to extract, isolate, and characterize bioactive polyacetylenes from Panax ginseng root using various extraction and separation methods Ginseng was extracted by reflux using methanol, ethanol, hexane, ethyl acetate, methanolic ultrasonication. The extracts were partitioned with hexane to obtain water-soluble portion and hexane-soluble portion. Hexane was subsequently removed under vacuum, and formed a crude polyacetylenes extract (crude PA). Silica gel chromatography and semi-preparative HPLC were utilized to prepare 5 fractions and the polyacetylenes were measure by HPLC and molecular weights confirm my APCI-MS and MNR. The bioactive effect was measured by MTT viability assay using murine 3T3-L1 cells. Extraction with methanol under reflux produced significantly larger amount of polyacetylenes (p<0.05). Liquid-liquid extraction and column chromatography were used to separate polyacetylenic compounds into five different fractions. Major polyacetylenes, panaxynol and panaxydol were found in fraction 1 and 2 respectively. Dose-response relationships were observed in 3T3-L1 cells and LC50 were 13.52±3.05µg/mL (fraction 1), 3.69±1.09µg/mL (fraction 2), 52.88±11.16µg/mL (fraction 3), 85.91±27.37µg/mL (fraction 4) and 135.52±32.91µg/mL (fraction 5). Fraction 2 containing panaxydol was found to have exhibited the greatest anti-proliferative effects on 3T3-L1 preadipocytes. Extraction with methanol under reflux produced significantly more polyacetylenes. Fractions that contain panaxydol was the most cytotoxic.

Direct nanoimprint lithography of Al2O3 using a chelated monomer-based precursor.

Nanostructuring of Al2O3 is predominantly achieved by the anodization of aluminum film and is limited to obtaining porous anodized aluminum oxide (AAO). One of the main restrictions in developing approaches for direct fabrication of various types of Al2O3 patterns, such as lines, pillars, holes, etc, is the lack of a processable aluminum-containing resist. In this paper, we demonstrate a stable precursor prepared by reacting aluminum tri-sec-butoxide with 2-(methacryloyloxy)ethyl acetoacetate, a chelating monomer, which can be used for large area direct nanoimprint lithography of Al2O3. Chelation in the precursor makes it stable against hydrolysis whilst the presence of a reactive methacrylate group renders it polymerizable. The precursor was mixed with a cross-linker and their in situ thermal free-radical co-polymerization during nanoimprinting rigidly shaped the patterns, trapped the metal atoms, reduced the surface energy and strengthened the structures, thereby giving a ~100% yield after demolding. The imprinted structures were heat-treated, leading to the loss of organics and their subsequent shrinkage. Amorphous Al2O3 patterns with line-widths as small as 17 nm were obtained. Our process utilizes the advantages of sol-gel and methacrylate routes for imprinting and at the same time alleviates the disadvantages associated with both these methods. With these benefits, the chelating monomer route may be the harbinger of the universal scheme for direct nanoimprinting of metal oxides.