Minimizing Residual Images of Amorphous Indium Gallium Zinc Oxide Thin-Film Transistor-Based Flexible Organic Light-Emitting Diode Displays by Controlling Oxygen Partial Pressure.

Plastic organic light emitting diode displays suffer from residual image, which is closely connected with the hysteresis of the driving thin-film transistor in the pixels. Therefore, in researching paper, we manufactured an OLED display comprise a polyimide substrate and an amorphous indium gallium zinc oxide thin film transistor active layer. Paper proposed a solution for reducing hysteresis through oxygen partial pressure control and evaluated it using hysteresis analysis. The results showed that hysteresis is strongly dependent on the threshold voltage is settled by the oxygen partial pressure while active layer deposition of the TFT. Moreover, hysteresis decreases with increasing temperature.

Synthesis of Cu nanoparticles with self-assembled monolayers via inert-gas condensation.

Cu nanoparticles with vaporized self-assembled monolayers (SAMs) for the prevention of oxidation were synthesized via inert-gas condensation (IGC). When processing the nanoparticles, the convection in the vacuum chamber was controlled using carrier gases such as Ar and He. Cu shots (2-8 mm) were used as raw materials and were evaporated via resistance heating. Octanethiol (CH3(CH2)7SH) was used for the SAMs and was introduced with the carrier gases during the process. The prepared samples were examined via scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to determine the particle sizes, the coating thicknesses of the SAMs, and the particle distribution states. The ingredients were confirmed via X-ray photoelectron spectroscopy (XPS) and energy-dispersive spectroscopy (EDS). The particle size and morphology were controlled by introducing various combinations of carrier gases, such as He, Ar and H2. Finally, stabilized Cu nanoparticles stably coated with octanethiol were successfully fabricated.