[Laboratory Performance Study of the Japanese Official Method to Detect Genetically Modified Papaya Line PRSV-YK].

Since the establishment of procedures for the safety assessment of food products that use recombinant DNA technology, the manufacture, import, and sale of genetically modified (GM) foods that have not undergone safety assessment are prohibited under the Food Sanitation Act. Therefore, a performance study to confirm the GM food testing operations of each laboratory is very important to ensure the reliability of the GM food monitoring system. In 2022, GM papaya line PRSV-YK-which has not yet been authorized in Japan-was selected for testing, and a papaya paste and a DNA solution were used as the test samples. With these samples, a laboratory performance study of the DNA extraction and real-time PCR operations was conducted. This confirmed that the 18 participating laboratories were generally performing the DNA extraction and real-time PCR operations correctly. However, some laboratories using certain DNA amplification reagent with some real-time PCR instruments were not able to determine the PRSV-YK detection test. This suggests that the PRSV-YK detection test may not be able to correctly detect samples containing GM papaya when performed with these combinations of instruments and reagent. In order to ensure the reliability of the PRSV-YK detection test, it is necessary to examine in detail how the combination of DNA polymerase reagents and real-time PCR instruments affects the detection limit, and to implement an appropriate solution.

[Verification Study of the Detection Method for Unauthorized Genetically Modified Papaya by Combining DNA Polymerases and Real-time PCR Instruments].

In the Japanese official detection method for unauthorized genetically modified (GM) papayas, one of two types of real-time PCR reagents with DNA polymerase (TaqMan Gene Master Mix [TaqMan Gene] or FastGene QPCR Probe Mastermix w/ROX [FastGene]) is primarily used for measurement. In 2022, we conducted a laboratory performance study on the unauthorized GM papaya line PRSV-YK, and the results revealed that high threshold cycle (Cq) values for the PRSV-YK detection test were obtained using TaqMan Gene with the 7500 Fast & 7500 Real-Time PCR System (ABI7500) and QuantStudio 12K Flex (QS12K), indicating the possibility of false negatives. The possibility of similar problems with all unauthorized GM papaya lines detection tests needs to be evaluated. In this study, we performed detection tests on unauthorized GM papaya lines (PRSV-YK, PRSV-SC, and PRSV-HN), the cauliflower mosaic virus 35S promotor (CaM), and a papaya positive control (Chy), and examined how the limits of detection (LOD) for each test are affected by two types of DNA polymerases (TaqMan Gene and FastGene) and three types of real-time PCR instruments (ABI7500, QS12K, and LightCycler 480 Instrument II [LC480]). In the PRSV-YK and PRSV-SC detection tests using ABI7500 and QS12K, measurement with TaqMan Gene showed a higher LOD than FastGene. In this case, an exponential amplification curve was confirmed on the amplification plot; however, the amplification curve did not cross the ΔRn threshold line and the correct Cq value was not obtained with a threshold line=0.2. The other tests (PRSV-HN, CaM, and Chy with ABI7500 and QS12K, and all detection tests with LC480) showed no important differences in the LOD for each test using either DNA polymerase. Therefore, when performing PRSV-YK and PRSV-SC detection tests with the ABI7500 or QS12K, FastGene should be used to avoid false negatives for foods containing GM papaya lines PRSV-YK and PRSV-SC at low mixing levels.

[Comparison of DNA Extraction Methods for Processed Foods Containing Soybean or Maize].

Processed foods containing soybean or maize are subject to labeling regulations pertinent to genetically modified (GM) foods in Japan. To confirm the reliability of the labeling procedure of GM foods, the Japanese standard analytical methods (standard methods) using real-time PCR technique have been established. Although certain DNA extraction protocols are stipulated as standard in these methods, the use of other protocols confirmed to be equivalent to the existing ones was permitted. In this study, the equivalence testing of the techniques employed for DNA extraction from processed foods containing soybean or corn was conducted. In this study, the equivalence testing of the techniques employed for DNA extraction from processed foods containing soybean or maize was conducted. The silica membrane-based DNA extraction kits, GM quicker 4 and DNeasy Plant Maxi Kit (Maxi Kit), as an existing method were compared. GM quicker 4 was considered to be equivalent to or better than Maxi Kit.

Providing appropriate information to consumers boosts the acceptability of genome-edited foods in Japan.

The Japanese Health Ministry recently granted permission for the market distribution of genome-edited (GE) foods, yet there remains a lack of full understanding among consumers regarding this technology. In this study, we conducted a survey to assess the acceptability of GE foods among Japanese consumers and examined the impact of providing information about GE foods on their acceptability. We conducted a web-based survey among 3,408 consumers aged 20-69 years, focusing on three aspects: (1) the commercial availability of GE foods, (2) the consumption of GE foods by others, and (3) your own consumption of GE foods. The survey findings revealed that participants were most accepting of the consumption of GE foods by others, followed by their acceptance of GE foods being commercially available. Notably, participants' acceptance of GE foods increased in all three aspects after they viewed an informative video. The video had a particularly strong impact on participants who fully or partially understood its content, compared to those who did not. Furthermore, regression analyses showed that participants' understanding of two key areas, namely "Why are GE foods important" and "What procedures are in place to ensure the safety of GE foods," played a crucial role in increasing acceptability. Overall, these results indicate that providing information about GE foods to Japanese consumers can effectively enhance their acceptance of such foods. The findings highlight the importance of understanding the benefits and safety measures associated with GE foods in influencing consumer attitudes.

[Investigation of Genetically Modified Maize Imported into Japan in 2021/2022 and the Applicability of Japanese Official Methods].

Given that the number of genetically modified (GM) maize events that have been announced as having undergone safety assessment procedures in Japan is increasing yearly, more information is needed about their actual recent domestic distribution in Japan. In this study, we investigated whether current Japanese official qualitative and quantitative methods (the current official methods) for GM maize can comprehensively target events in domestically distributed maize. For samples with the identity-preserved (IP) handling system and non-IP samples from the United States (US) and non-IP samples from Brazil, we performed event-specific real-time PCR targeting 25 authorized single GM maize events in addition to the current official methods. According to our results, 15 events targeted by the current official methods were detected, but insect-resistance (IR) Event5307 and herbicide-tolerant (HT) DAS40278, not targeted by the current official methods, were detected in the US (one out of 5 lots) and Brazilian (four out of 5 lots) non-IP samples, respectively. Nevertheless, a survey of recent GM maize acreage in recent years has revealed that more than 95% of the acreage in US maize is occupied by HT or IR/HT stacked events, and that more than 95% of the acreage in Brazilian maize is occupied by IR or IR/HT stacked events. Because the current official methods can target all stacked events related to Event5307 and DAS40278, the only undetectable events are the single Event5307 and DAS40278, whose production is estimated to be less than 5% of the total production in the producing country. Therefore, we conclude that the current official methods for the labelling of GM maize should be maintained in view of practicability.

Development and Validation of a New Robust Detection Method for Low-Content DNA Using ΔΔCq-Based Real-Time PCR with Optimized Standard Plasmids as a Control Sample.

Real-time polymerase chain reaction (PCR) is the gold standard for DNA detection in many fields, including food analysis. However, robust detection using a real-time PCR for low-content DNA samples remains challenging. In this study, we developed a robust real-time PCR method for low-content DNA using genetically modified (GM) maize at concentrations near the limit of detection (LOD) as a model. We evaluated the LOD of real-time PCR targeting two common GM maize sequences (P35S and TNOS) using GM maize event MON863 containing a copy of P35S and TNOS. The interlaboratory study revealed that the LOD differed among laboratories partly because DNA input amounts were variable depending on measurements of DNA concentrations. To minimize this variability for low-content DNA samples, we developed ΔΔCq-based real-time PCR. In this study, ΔCq and ΔΔCq are as follows: ΔCq = Cq (P35S or TNOS) - Cq (SSIIb; maize endogenous gene), ΔΔCq = ΔCq (analytical sample) - ΔCq (control sample at concentrations near the LOD). The presence of GM maize was determined based on ΔΔCq values. In addition, we used optimized standard plasmids containing SSIIb, P35S, and TNOS with ΔCq equal to the MON863 genomic DNA (gDNA) at concentrations near the LOD as a control sample. A validation study indicated that at least 0.2% MON863 gDNA could be robustly detected. Using several GM maize certified reference materials, we have demonstrated that this method was practical for detecting low-content GM crops and thus for validating GM food labeling. With appropriate standards, this method would be applicable in many fields, not just food.

Unbiased prediction of off-target sites in genome-edited rice using SITE-Seq analysis on a web-based platform.

Genome-editing using the CRISPR-Cas9 system has the potential to substantially accelerate crop breeding. Since off-target editing is one of problems, a reliable method for comprehensively detecting off-target sites is needed. A number of in silico methods based on homology to on-target sequence have been developed, however the prediction without false negative is still under discussion. In this study, we performed a SITE-Seq analysis to predict potential off-target sites. SITE-Seq analysis is a comprehensive method that can detect double-strand breaks in vitro. Furthermore, we developed a systematic method using SITE-Seq in combination with web-based Galaxy system (Galaxy for Cut Site Detection), which can perform reproducible analyses without command line operations. We conducted a SITE-Seq analysis of a rice genome targeted by OsFH15 gRNA-Cas9 as a model, and found 41 candidate off-target sites in the annotated regions. Detailed amplicon-sequencing revealed mutations at one off-target site in actual genome-edited rice. Since this off-target site has an uncommon protospacer adjacent motif, it is difficult to predict using in silico methods alone. Therefore, we propose a novel off-target assessment scheme for genome-edited crops that combines the prediction of off-target candidates by SITE-Seq and in silico programs and the validation of off-target sites by amplicon-sequencing.

Development and Interlaboratory Validation of a Novel Reproducible Qualitative Method for GM Soybeans Using Comparative Cq-Based Analysis for the Revised Non-GMO Labeling System in Japan.

Many countries have implemented the labeling system of genetically modified organisms (GMO). In Japan, the regulatory threshold for non-GMO labeling will be revised and restricted to undetectable by April 2023. The practical criterion for the revised system is based on the limit of detection (LOD). However, determining whether the commingling of GMO levels exceeds the LOD is challenging because GM contents close to the LOD are usually below the limit of quantification. In this study, we developed a qualitative method based on comparative Cq-based analysis targeting cauliflower mosaic virus 35S promoter and GM soybean MON89788 event-specific sequences that could be applicable to the revised non-GMO labeling. ΔCq values between the target and endogenous sequences were calculated, and the ΔΔCq value obtained was used as a criterion to determine analytical samples with GM contents exceeding the threshold. To improve the reproducibility of the method, we used a standard plasmid that yields equivalent and stable ΔCq values comparable with those obtained from LOD samples. The developed method was validated with an interlaboratory study. The new qualitative detection concept would be useful for ensuring robust and reproducible results among laboratories, particularly for detecting low-copy-number DNA samples.

HsSAS-6-dependent cartwheel assembly ensures stabilization of centriole intermediates.

At the onset of procentriole formation, a structure called the cartwheel is formed adjacent to the pre-existing centriole. SAS-6 proteins are thought to constitute the hub of the cartwheel structure. However, the exact function of the cartwheel in the process of centriole formation has not been well characterized. In this study, we focused on the functions of human SAS-6 (HsSAS-6, also known as SASS6). By using an in vitro reconstitution system with recombinant HsSAS-6, we first observed its conserved molecular property of forming the central part of the cartwheel structure. Furthermore, we uncovered critical functions of HsSAS-6 by using a combination of an auxin-inducible HsSAS-6-degron (AID) system and super-resolution microscopy in human cells. Our results demonstrate that the HsSAS-6 is required not only for the initiation of centriole formation, but also for the stabilization of centriole intermediates. Moreover, after procentriole formation, HsSAS-6 is necessary for limiting Plk4 accumulation at the centrioles and thereby suppressing the formation of initiation sites that would otherwise promote the development of extra procentrioles. Overall, these findings illustrate the conserved and fundamental functions of the cartwheel in centriole duplication.

Bimodal Binding of STIL to Plk4 Controls Proper Centriole Copy Number.

The number of centrioles is tightly controlled to ensure bipolar spindle assembly, which is a prerequisite to maintain genome integrity. However, our understanding of the fundamental principle that governs the formation of a single procentriole per parental centriole is incomplete. Here, we show that the local restriction of Plk4, a master regulator of the procentriole formation, is achieved by a bimodal interaction of STIL with Plk4. We demonstrate that the conserved short coiled-coil region of STIL binds to and protects Plk4 from protein degradation at the site of procentriole formation. On the other hand, the conserved C-terminal region of STIL named truncated in microcephaly (TIM) domain promotes autophosphorylation and degradation of adjacent Plk4 by the direct interaction. Thus, we propose that positive and negative regulation based on the bimodal binding of Plk4 and STIL ensures the formation of a single procentriole per parental centriole.

Cep295 is a conserved scaffold protein required for generation of a bona fide mother centriole.

Centrioles surrounded by pericentriolar material (PCM) serve as the core structure of the centrosome. A newly formed daughter centriole grows into a functional mother centriole. However, the underlying mechanisms remain poorly understood. Here we show that Cep295, an evolutionarily conserved protein, is required for generation of a bona fide mother centriole organizing a functional centrosome. We find that Cep295 is recruited to the proximal centriole wall in the early stages of procentriole assembly. Cep295 then acts as a scaffold for the proper assembly of the daughter centriole. We also find that Cep295 binds directly to and recruits Cep192 onto the daughter centriole wall, which presumably endows the function of the new mother centriole for PCM assembly, microtubule-organizing centre activity and the ability for centriole formation. These findings led us to propose that Cep295 acts upstream of the conserved pathway for centriole formation and promotes the daughter-to-mother centriole conversion.

Roles of cilia, fluid flow, and Ca2+ signaling in breaking of left-right symmetry.

The emergence of left-right (L-R) asymmetry during embryogenesis is a classic problem in developmental biology. It is only since the 1990s, however, that substantial insight into this problem has been achieved by molecular and genetic approaches. Various genes required for L-R asymmetric morphogenesis in vertebrates have now been identified, and many of these genes are required for the formation and motility of cilia. Breaking of L-R symmetry in the mouse embryo occurs in the ventral node, where two types of cilia are present. Whereas centrally located motile cilia generate a leftward fluid flow, peripherally located immotile cilia sense a flow-dependent signal, which is either chemical or mechanical in nature. Although Ca2+ signaling is implicated in flow sensing, the precise mechanism remains unknown. Here we summarize current knowledge of L-R symmetry breaking in vertebrates (focusing on the mouse), with a special emphasis on the roles of cilia, fluid flow, and Ca2+ signaling.

Cluap1 localizes preferentially to the base and tip of cilia and is required for ciliogenesis in the mouse embryo.

Qilin is one of several genes in zebrafish whose mutation results in cystic kidney. We have now studied the role of its mouse ortholog, Cluap1, in embryonic development by generating Cluap1 knockout (Cluap1-/-) mice. Cluap1-/- embryos died mid-gestation manifesting impairment of ciliogenesis in various regions including the node and neural tube. The basal body was found to be properly docked to the apical membrane of cells in the mutant, but the axoneme failed to grow. Cluap1 is a ciliary protein and is preferentially localized at the base and tip of cilia. Hedgehog signaling, as revealed with a Pacthed1-lacZ reporter gene, was lost in Cluap1-/- embryos at embryonic day (E) 8.5 but was ectopically expanded at E9.0. The Cluap1 knockout embryos also failed to manifest left-right asymmetric expression of Nodal in the lateral plate, most likely as a result of the loss of Hedgehog signaling in node crown cells that in turn leads to pronounced down-regulation of Gdf1 expression in these cells. Crown cell-specific restoration of Cluap1 expression rescued Gdf1 expression in crown cells and left-sided Nodal expression in the lateral plate of mutant embryos. Our results suggest that Cluap1 contributes to ciliogenesis by regulating the intraflagellar transport (IFT) cycle at the base and tip of the cilium.

Cilia at the node of mouse embryos sense fluid flow for left-right determination via Pkd2.

Unidirectional fluid flow plays an essential role in the breaking of left-right (L-R) symmetry in mouse embryos, but it has remained unclear how the flow is sensed by the embryo. We report that the Ca(2+) channel Polycystin-2 (Pkd2) is required specifically in the perinodal crown cells for sensing the nodal flow. Examination of mutant forms of Pkd2 shows that the ciliary localization of Pkd2 is essential for correct L-R patterning. Whereas Kif3a mutant embryos, which lack all cilia, failed to respond to an artificial flow, restoration of primary cilia in crown cells rescued the response to the flow. Our results thus suggest that nodal flow is sensed in a manner dependent on Pkd2 by the cilia of crown cells located at the edge of the node.

Two rotating cilia in the node cavity are sufficient to break left-right symmetry in the mouse embryo.

Determination of left-right asymmetry in mouse embryos is achieved by a leftward fluid flow (nodal flow) in the node cavity that is generated by clockwise rotational movement of 200-300 cilia in the node. The precise action of nodal flow and how much flow input is required for the robust read-out of left-right determination remains unknown. Here we show that a local leftward flow generated by as few as two rotating cilia is sufficient to break left-right symmetry. Quantitative analysis of fluid flow and ciliary rotation in the node of mouse embryos shows that left-right asymmetry is already established within a few hours after the onset of rotation by a subset of nodal cilia. Examination of various ciliary mutant mice shows that two rotating cilia are sufficient to initiate left-right asymmetric gene expression. Our results suggest the existence of a highly sensitive system in the node that is able to sense an extremely weak unidirectional flow, and may favour a model in which the flow is sensed as a mechanical force.

Planar polarization of node cells determines the rotational axis of node cilia.

Rotational movement of the node cilia generates a leftward fluid flow in the mouse embryo because the cilia are posteriorly tilted. However, it is not known how anterior-posterior information is translated into the posterior tilt of the node cilia. Here, we show that the basal body of node cilia is initially positioned centrally but then gradually shifts toward the posterior side of the node cells. Positioning of the basal body and unidirectional flow were found to be impaired in compound mutant mice lacking Dvl genes. Whereas the basal body was normally positioned in the node cells of Wnt3a(-/-) embryos, inhibition of Rac1, a component of the noncanonical Wnt signalling pathway, impaired the polarized localization of the basal body in wild-type embryos. Dvl2 and Dvl3 proteins were found to be localized to the apical side of the node cells, and their location was polarized to the posterior side of the cells before the posterior positioning of the basal body. These results suggest that posterior positioning of the basal body, which provides the posterior tilt to node cilia, is determined by planar polarization mediated by noncanonical Wnt signalling.

De novo formation of left-right asymmetry by posterior tilt of nodal cilia.

In the developing mouse embryo, leftward fluid flow on the ventral side of the node determines left-right (L-R) asymmetry. However, the mechanism by which the rotational movement of node cilia can generate a unidirectional flow remains hypothetical. Here we have addressed this question by motion and morphological analyses of the node cilia and by fluid dynamic model experiments. We found that the cilia stand, not perpendicular to the node surface, but tilted posteriorly. We further confirmed that such posterior tilt can produce leftward flow in model experiments. These results strongly suggest that L-R asymmetry is not the descendant of pre-existing L-R asymmetry within each cell but is generated de novo by combining three sources of spatial information: antero-posterior and dorso-ventral axes, and the chirality of ciliary movement.