Poly(phenylalanine) and poly(3,4-dihydroxy-L-phenylalanine): Promising biomedical materials for building stimuli-responsive nanocarriers.

Cancer is a serious threat to human health because of its high annual mortality rate. It has attracted significant attention in healthcare, and identifying effective strategies for the treatment and relief of cancer pain requires urgency. Drug delivery systems (DDSs) offer the advantages of excellent efficacy, low cost, and low toxicity for targeting drugs to tumor sites. In recent decades, copolymer carriers based on poly(phenylalanine) (PPhe) and poly(3,4-dihydroxy-L-phenylalanine) (PDopa) have been extensively investigated owing to their good biocompatibility, biodegradability, and controllable stimulus responsiveness, which have resulted in DDSs with loading and targeted delivery capabilities. In this review, we introduce the synthesis of PPhe and PDopa, highlighting the latest proposed synthetic routes and comparing the differences in drug delivery between PPhe and PDopa. Subsequently, we summarize the various applications of PPhe and PDopa in nanoscale-targeted DDSs, providing a comprehensive analysis of the drug release behavior based on different stimulus-responsive carriers using these two materials. In the end, we discuss the challenges and prospects of polypeptide-based DDSs in the field of cancer therapy, aiming to promote their further development to meet the growing demands for treatment.

Hybrid films loaded with 5-fluorouracil and Reglan for synergistic treatment of colon cancer via asynchronous dual-drug delivery.

Combination therapy with oral administration of several active ingredients is a popular clinical treatment for cancer. However, the traditional method has poor convenience, less safety, and low efficiency for patients. The combination of traditional pharmaceutical techniques and advanced material conversion methods can provide new solutions to this issue. In this research, a new kind of hybrid film was created via coaxial electrospraying, followed by a casting process. The films were composed of Reglan and 5-fluorouracil (5-FU)-loaded cellulose acetate (CA) core-shell particles in a polyvinylpyrrolidone (PVP) film matrix. Microscopic observations of these films demonstrated a solid cross section loaded with core-shell particles. X-ray diffraction and Fourier-transform infrared tests verified that the Reglan and 5-FU loaded in the films showed amorphous states and fine compatibilities with the polymeric matrices, i.e., PVP and CA, respectively. In vitro dissolution tests indicated that the films were able to provide the desired asynchronous dual-drug delivery, fast release of Reglan, and sustained release of 5-FU. The controlled release mechanisms were shown to be an erosion mechanism for Reglan and a typical Fickian diffusion mechanism for 5-FU. The protocols reported herein pioneer a new approach for fabricating biomaterials loaded with multiple drugs, each with its own controlled release behavior, for synergistic cancer treatment.

Effects of a novel regimen of repetitive transcranial magnetic stimulation (rTMS) on neural remodeling and motor function in adult male mice with ischemic stroke.

Neuroinflammation caused by excessive microglial activation plays a key role in the pathogenesis of ischemic stroke. Repetitive transcranial magnetic stimulation (rTMS) is a noninvasive neuromodulatory technique that has recently been reported to regulate microglial functions and exert anti-inflammatory effects. The intermittent burst stimulation (iTBS) regimen in rTMS improves neuronal excitability. However, whether iTBS exerts its anti-inflammatory effects by stimulating neurons and thereby modulating microglial polarization remains unclear. Motor function was assessed after 1 week of rTMS (iTBS regimen) treatment in adult male mice with occlusion/reperfusion of the middle cerebral artery (MCAO/r) injury. We also investigated the molecular biological alterations associated with microglial polarization using a cell proliferation assay, multiplex cytokine bioassays, and immunofluorescence staining. iTBS regimen can improve balance and motor coordination function, increase spontaneous movement, and improve walking function in mice with early cerebral ischemia injury. Expression levels of IL-1ß, TNF-α, and IL-10 increased significantly in mice with MCAO injury. Especially, rTMS significantly increased the number of proliferating cells in the infarcted cortex. The fluorescence intensity of MAP2 in the peri-infarct area of MCAO injured mice was low, but the signal was broader. Compared with MCAO group, the fluorescence intensity of MAP2 in rTMS group was significantly increased. rTMS inhibited pro-inflammatory M1 activation (Iba1+/CD86+) and improved anti-inflammatory M2 activation (Iba1+/CD206+) in the peri-infarct zone, thus significantly changing the phenotypic ratio M1/M2. rTMS improves motor dysfunction and neuroinflammation after cerebral I/R injury in mice by regulating microglial polarization.

Application and Development of Electrospun Nanofiber Scaffolds for Bone Tissue Engineering.

Nanofiber scaffolds have gained significant attention in the field of bone tissue engineering. Electrospinning, a straightforward and efficient technique for producing nanofibers, has been extensively researched. When used in bone tissue engineering scaffolds, electrospun nanofibers with suitable surface properties promote new bone tissue growth and enhance cell adhesion. Recent advancements in electrospinning technology have provided innovative approaches for scaffold fabrication in bone tissue engineering. This review comprehensively examines the utilization of electrospun nanofibers in bone tissue engineering scaffolds and evaluates the relevant literature. The review begins by presenting the fundamental principles and methodologies of electrospinning. It then discusses various materials used in the production of electrospun nanofiber scaffolds for bone tissue engineering, including natural and synthetic polymers, as well as certain inorganic materials. The challenges associated with these materials are also described. The review focuses on novel electrospinning techniques for scaffold construction in bone tissue engineering, such as multilayer nanofibers, multifluid electrospinning, and the integration of electrospinning with other methods. Recent advancements in electrospinning technology have enabled the fabrication of precisely aligned nanofiber scaffolds with nanoscale architectures. These innovative methods also facilitate the fabrication of biomimetic structures, wherein bioactive substances can be incorporated and released in a controlled manner for drug delivery purposes. Moreover, they address issues encountered with traditional electrospun nanofibers, such as mechanical characteristics and biocompatibility. Consequently, the development and implementation of novel electrospinning technologies have revolutionized scaffold fabrication for bone tissue engineering.

Versatile Hyper-Cross-Linked Polymers Derived from Waste Polystyrene: Synthesis, Properties, and Intentional Recycling.

Waste polystyrene contributes considerably to environmental pollution due to its persistent nature, prompting a widespread consensus on the urgent need for viable recycling solutions. Owing to the aromatic groups structure of polystyrene, hyper-cross-linked polymers can be synthesized through the Friedel-Crafts cross-linking reaction using Lewis acids as catalysts. In addition, hyper-cross-linked polystyrene and its carbonaceous counterparts can be used in several important applications, which helps in their efficient recycling. This review systematically explores methods for preparing multifunctional hyper-cross-linked polymers from waste polystyrene and their applications in sustainable recycling. We have comprehensively outlined various synthetic approaches for these polymers and investigated their physical and chemical properties. These multifunctional polymers not only exhibit structural flexibility but also demonstrate diversity in performance, making them suitable for various applications. Through a systematic examination of synthetic methods, we showcase the cutting-edge positions of these materials in the field of hyper-cross-linked polymers. Additionally, we provide in-depth insights into the potential applications of these hyper-cross-linked polymers in intentional recycling, highlighting their important contributions to environmental protection and sustainable development. This research provides valuable references to the fields of sustainable materials science and waste management, encouraging further exploration of innovative approaches for the utilization of discarded polystyrene.

The effect of new e-commerce platform's OSC promotion on consumer cognition: from cognitive legitimacy and cognitive psychology perspective.

Introduction: In the realm of emerging e-commerce platforms, the influence of online shopping events, specifically online carnival promotions (OSC), on consumer behavior is a significant area of interest.This paper delves into the effects of such promotions on consumer perceptions, a topic that has not been extensively explored in academic research. Methods: To investigate this phenomenon, two distinct studies were conducted. The first study employed a questionnaire-based experiment involving 220 participants, divided into two groups. The first study examined the mediating role of cognitive legitimacy in the relationship between OSC events organized by new e-commerce platforms and the perceptions of consumers. The second study utilized an event-related potentials (ERPs) experiment with 33 participants to explore the differences in consumer perceptions between OSC promotions and general promotions by new e-commerce platforms. This study measured the brain's response to promotional stimuli to gain insights into the cognitive processes involved. Results: The first study yielded results that suggest OSC activities can facilitate the establishment of cognitive legitimacy for new e-commerce platforms. This, in turn, was found to be associated with an increase in positive purchase intentions among consumers. In the second study, the ERPs data indicated that exposure to OSC promotional materials elicited larger P2 and N2 ERP components when participants were presented with the logo of a new e-commerce platform. This was in contrast to the response to general promotional materials, suggesting a heightened cognitive and perceptual engagement with OSC promotions. Discussion: The findings from both studies collectively imply that OSC promotions have a distinct impact on consumer perceptions and cognitive processes. The implicit memory triggered by these promotions appears to influence the identification of new platforms and the mechanisms of cognitive control during online shopping. This, in turn, may have implications for explicit consumer behavior, suggesting that OSC promotions could be a powerful tool for shaping consumer attitudes and behaviors in the e-commerce space. The results underscore the importance of understanding the nuances of consumer engagement with new e-commerce platforms and the role of promotional strategies in fostering a positive brand image and consumer loyalty.

Recent progress of electrospun nanofibers as burning dressings.

Burns are a global public health problem, which brings great challenges to public health and the economy. Severe burns often lead to systemic infection, shock, multiple organ failure, and even death. With the increasing demand for the therapeutic effect of burn wounds, traditional dressings have been unable to meet people's needs due to their single function and many side effects. In this context, electrospinning shows a great prospect on the way to open up advanced wound dressings that promote wound repairing and prevent infection. With its large specific surface area, high porosity, and similar to natural extracellular matrix (ECM), electrospun nanofibers can load drugs and accelerate wound healing. It provides a promising solution for the treatment and management of burn wounds. This review article introduces the concept of burn and the types of electrospun nanofibers, then summarizes the polymers used in electrospun nanofiber dressings. Finally, the drugs (plant extracts, small molecule drugs and nanoparticles) loaded with electrospun burn dressings are summarized. Some promising aspects for developing commercial electrospun burn dressings are proposed.

Preparation and Investigation of Cellulose Acetate/Gelatin Janus Nanofiber Wound Dressings Loaded with Zinc Oxide or Curcumin for Enhanced Antimicrobial Activity.

The skin, as the largest organ, serves as a protective barrier against external stimuli. However, when the skin is injured, wound healing becomes a complex process influenced by physiological conditions, bacterial infections, and inflammation. To improve the process of wound healing, a variety of wound dressings with antibacterial qualities have been created. Electrospun nanofibers have gained significant attention in wound dressing research due to their large specific surface area and unique structure. One interesting method for creating Janus-structured nanofibers is side-by-side electrospinning. This work used side-by-side electrospinning to make cellulose acetate/gelatin Janus nanofibers. Curcumin and zinc oxide nanoparticles were added to these nanofibers. We studied Janus nanofibers' physicochemical characteristics and abilities to regulate small-molecule medication release. Janus nanofibers coated with zinc oxide nanoparticles and curcumin were also tested for antibacterial activity. The Janus nanofibers with specified physicochemical characteristics were successfully fabricated. Nanofibers released small-molecule medicines in a controlled manner. Additionally, the Janus nanofibers loaded with curcumin exhibited excellent antibacterial capabilities. This research contributes to the development of advanced wound dressings for promoting wound healing and combating bacterial infections.

Electrospun medicated gelatin/polycaprolactone Janus fibers for photothermal-chem combined therapy of liver cancer.

Liver cancer is a common cancer in the world, and core-shell nanoparticles as a commonly used combination therapy for local tumor ablation, have many shortcomings. In this study, photothermal Janus nanofibers were prepared using a electrospinning technology for tumor treatment, and the products were characterized and in vitro photothermal performance investigated. The micromorphology analysis showed that the photothermic agent CuS and electrospun fibers (loaded with CuS and anticancer drug dihydromyricetin) were successfully prepared, with diameters of 11.58 ± 0.27 µm and 1.19 ± 0.01 µm, respectively. Water contact angle and tensile test indicated that the fiber membranes has a certain hydrophilic adhesion and excellent mechanical strength. The fiber membranes has 808 nm near-infrared laser photothermal heating performance and photothermal stability, and it also has a strong response to the laser that penetrates biological tissue. In addition, in vitro cell culture and in vivo implantation study showed that the fiber membranes could kill HepG2 hepatocellular carcinoma cells combined with photothermal-chem and could be enriched in the implantation area, respectively. Hence, the Janus membranes may be a potential cancer treatment material.

Integrated Janus nanofibers enabled by a co-shell solvent for enhancing icariin delivery efficiency.

During the past several decades, nanostructures have played their increasing influences on the developments of novel nano drug delivery systems, among which, double-chamber Janus nanostructure is a popular one. In this study, a new tri-channel spinneret was developed, in which two parallel metal capillaries were nested into another metal capillary in a core-shell manner. A tri-fluid electrospinning was conducted with a solvent mixture as the shell working fluid for ensuring the formation of an integrated Janus nanostructure. The scanning electronic microscopic results demonstrated that the resultant nanofibers had a linear morphology and two distinct compartments within them, as indicated by the image of a cross-section. Fourier Transformation Infra-Red spectra and X-Ray Diffraction patterns verified that the loaded poorly water-soluble drug, i.e. icariin, presented in the Janus medicated nanofibers in an amorphous state, which should be attributed to the favorable secondary interactions between icariin and the two soluble polymeric matrices, i.e. hydroxypropyl methyl cellulose (HPMC) and polyvinylpyrrolidone (PVP). The in vitro dissolution tests revealed that icariin, when encapsulated within the Janus nanofibers, exhibited complete release within a duration of 5 min, which was over 11 times faster compared to the raw drug particles. Furthermore, the ex vivo permeation tests demonstrated that the permeation rate of icariin was 16.2 times higher than that of the drug powders. This improvement was attributed to both the rapid dissolution of the drug and the pre-release of the trans-membrane enhancer sodium lauryl sulfate from the PVP side of the nanofibers. Mechanisms for microformation, drug release, and permeation were proposed. Based on the methodologies outlined in this study, numerous novel Janus nanostructure-based nano drug delivery systems can be developed for poorly water-soluble drugs in the future.

Engineered shapes using electrohydrodynamic atomization for an improved drug delivery.

The shapes of micro- and nano-products have profound influences on their functional performances, which has not received sufficient attention during the past several decades. Electrohydrodynamic atomization (EHDA) techniques, mainly include electrospinning and electrospraying, are facile in manipulate their products' shapes. In this review, the shapes generated using EHDA for modifying drug release profiles are reviewed. These shapes include linear nanofibers, round micro-/nano-particles, and beads-on-a-string hybrids. They can be further divided into different kinds of sub-shapes, and can be explored for providing the desired pulsatile release, sustained release, biphasic release, delayed release, and pH-sensitive release. Additionally, the shapes resulted from the organizations of electrospun nanofibers are discussed for drug delivery, and the shapes and inner structures can be considered together for developing novel drug delivery systems. In future, the shapes and the related shape-performance relationships at nanoscale, besides the size, inner structure and the related structure-performance relationships, would further play their important roles in promoting the further developments of drug delivery field. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Electrospun Fenoprofen/Polycaprolactone @ Tranexamic Acid/Hydroxyapatite Nanofibers as Orthopedic Hemostasis Dressings.

Dressings with multiple functional performances (such as hemostasis, promoting regeneration, analgesia, and anti-inflammatory effects) are highly desired in orthopedic surgery. Herein, several new kinds of medicated nanofibers loaded with several active ingredients for providing multiple functions were prepared using the modified coaxial electrospinning processes. With an electrospinnable solution composed of polycaprolactone and fenoprofen as the core working fluid, several different types of unspinnable fluids (including pure solvent, nanosuspension containing tranexamic acid and hydroxyapatite, and dilute polymeric solution comprising tranexamic acid, hydroxyapatite, and polyvinylpyrrolidone) were explored to implement the modified coaxial processes for creating the multifunctional nanofibers. Their morphologies and inner structures were assessed through scanning and transmission electron microscopes, which all showed a linear format without the discerned beads or spindles and a diameter smaller than 1.0 µm, and some of them had incomplete core-shell nanostructures, represented by the symbol @. Additionally, strange details about the sheaths' topographies were observed, which included cracks, adhesions, and embedded nanoparticles. XRD and FTIR verified that the drugs tranexamic acid and fenoprofen presented in the nanofibers in an amorphous state, which resulted from the fine compatibility among the involved components. All the prepared samples were demonstrated to have a fine hydrophilic property and exhibited a lower water contact angle smaller than 40° in 300 ms. In vitro dissolution tests indicated that fenoprofen was released in a sustained manner over 6 h through a typical Fickian diffusion mechanism. Hemostatic tests verified that the intentional distribution of tranexamic acid on the shell sections was able to endow a rapid hemostatic effect within 60 s.

Electrosprayed Eudragit RL100 nanoparticles with Janus polyvinylpyrrolidone patches for multiphase release of paracetamol.

Advanced nanotechniques and the corresponding complex nanostructures they produce represent some of the most powerful tools for developing novel drug delivery systems (DDSs). In this study, a side-by-side electrospraying process was developed for creating double-chamber nanoparticles in which Janus soluble polyvinylpyrrolidone (PVP) patches were added to the sides of Eudragit RL100 (RL100) particles. Both sides were loaded with the poorly water-soluble drug paracetamol (PAR). Scanning electron microscope results demonstrated that the electrosprayed nanoparticles had an integrated Janus nanostructure. Combined with observations of the working processes, the microformation mechanism for creating the Janus PVP patches was proposed. XRD, DSC, and ATR-FTIR experiments verified that the PAR drug was present in the Janus particles in an amorphous state due to its fine compatibility with the polymeric matrices. In vitro dissolution tests verified that the Janus nanoparticles were able to provide a typical biphasic drug release profile, with the PVP patches providing 43.8 ± 5.4% drug release in the first phase in a pulsatile manner. In vivo animal experiments indicated that the Janus particles, on one hand, could provide a faster therapeutic effect than the electrosprayed sustained-release RL100 nanoparticles. On the other hand, they could maintain a therapeutic blood drug concentration for a longer period. The controlled release mechanism of the drug was proposed. The protocols reported here pioneer a new process-structure-performance relationship for developing Janus-structure-based advanced nano-DDSs.

Synergistic Inhibitions of Gram-Negative Bacteria by Combination Treatment with Ciprofloxacin and a Novel Glucolipid.

Psychrophilic fungus Pseudogymnoascus sp. OUCMDZ-4032 derived from Antarctica was cultivated under 16 °C to produce a new glucolipid compound (1). Its structure was elucidated by analysis of detailed spectroscopic data, acid hydrolysis and 1-phenyl-3-methyl-5-pyrazolone precolumn derivatization, and 13C NMR quantum chemical calculations. Though compound 1 did not show inhibitory activity against bacteria, it can reduce the minimum inhibitory concentration (MIC) of ciprofloxacin against Gram-negative bacteria Pseudomonas aeruginosa, Escherichia coli, and Salmonella paratyphi by 1024, 256 and 256-fold. Compound 1 showed potential as a synergistically inhibiting adjuvant in co-administration with antibiotic to enhance antibacterial activities.

The contact force between lunar-based equipment and lunar soil.

Lunar-based equipment plays a vital role in the exploration of the moon because it undertakes the tasks of moving, transporting, digging, and so on. In order to control the gait of lunar-based equipment more precisely and guarantee mobile stability, the contact mechanism between its foot and lunar soil is worthy of in-depth study. In this paper, a contact model is proposed to predict the stress, strain, and displacement both on the contact surface and in the lunar soil when the foot is under vertical load. The axial stress in the proposed contact model is verified through the experiment and its accuracy in the lunar equipment is verified through simulation. The error is in a reasonable range and the influence depth of load conforms to the experiment results. This paper provides a relatively accurate model to describe the contact force between the lunar-based equipment's foot and the lunar soil and will promote the research of lunar exploration.

Electrospun multi-chamber core-shell nanofibers and their controlled release behaviors: A review.

Core-shell structure is a concentric circle structure found in nature. The rapid development of electrospinning technology provides more approaches for the production of core-shell nanofibers. The nanoscale effects and expansive specific surface area of core-shell nanofibers can facilitate the dissolution of drugs. By employing ingenious structural designs and judicious polymer selection, specialized nanofiber drug delivery systems can be prepared to achieve controlled drug release. The synergistic combination of core-shell structure and materials exhibits a strong strategy for enhancing the drug utilization efficiency and customizing the release profile of drugs. Consequently, multi-chamber core-shell nanofibers hold great promise for highly efficient disease treatment. However, little attention concentration is focused on the effect of multi-chamber core-shell nanofibers on controlled release of drugs. In this review, we introduced different fabrication techniques for multi-chamber core-shell nanostructures, including advanced electrospinning technologies and surface functionalization. Subsequently, we reviewed the different controlled drug release behaviors of multi-chamber core-shell nanofibers and their potential needs for disease treatment. The comprehensive elucidation of controlled release behaviors based on electrospun multi-chamber core-shell nanostructures could inspire the exploration of novel controlled delivery systems. Furthermore, once these fibers with customizable drug release profiles move toward industrial mass production, they will potentially promote the development of pharmacy and the treatment of various diseases. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Safety and efficacy of stoma site selection in CT-guided percutaneous gastrostomy: a retrospective analysis.

PURPOSE: To compare the safety and efficacy of CPG in the rectus abdominis and intercostal regions. MATERIALS AND METHODS: This retrospective study included 226 patients who underwent CPG at a single center, with the stoma placed in the rectus abdominis or intercostal region. Surgical outcomes and complications, such as pain and infection within 6 months postoperatively, were recorded. RESULTS: The surgical success rate was 100%, and the all-cause mortality rate within 1 month was 0%. An intercostal stoma was placed in 56 patients; a rectus abdominis stoma was placed in 170 patients. The duration of surgery was longer for intercostal stoma placement (37.66 ± 14.63 min) than for rectus abdominis stoma placement (30.26 ± 12.40 min) (P = 0.000). At 1 month postsurgery, the rate of stoma infection was greater in the intercostal group (32.1%) than in the rectus abdominis group (20.6%), but the difference was not significant (P = 0.077). No significant difference was observed in the infection rate between the two groups at 3 or 6 months postsurgery (P > 0.05). Intercostal stoma patients reported higher pain scores during the perioperative period and at 1 month postsurgery (P = 0.000), but pain scores were similar between the two groups at 3 and 6 months postsurgery. The perioperative complication rates for intercostal and rectus abdominis surgery were 1.8% and 5.3%, respectively (P = 0.464), with no significant difference in the incidence of tube dislodgement (P = 0.514). Patient weight improved significantly at 3 and 6 months postoperatively compared to preoperatively (P < 0.05). CONCLUSION: Rectus abdominis and intercostal stomas have similar safety and efficacy. However, intercostal stomas may result in greater short-term patient discomfort.

Silver oxide decorated urchin-like microporous organic polymer composites as versatile antibacterial organic coating materials.

Microporous organic polymers (MOPs) and metal oxide hybrid composites are considered valuable coating materials because of their versatility derived from the synergistic combination of MOPs' inherent dispersibility and the distinctive properties of metal oxides. In this study, we present the synthesis of sea-urchin-like MOPs hybridised with silver oxide nanoparticles (Ag2O NPs) to fabricate antibacterial composites suitable for potential antibacterial coating applications. Ag2O NP-decorated urchin-like MOPs (Ag2O@UMOPs) were synthesised by employing a combination of two methods: a one-pot Lewis acid-base interaction-mediated self-assembly and a straightforward impregnation process. The as-prepared Ag2O@UMOPs demonstrated high antibacterial efficacy against both E. coli (G-) and S. aureus (G+). The antibacterial mechanism of Ag2O@UMOPs mainly involved the synergistic effects of accumulation of Ag2O@UMOPs, the release of Ag+ ions, and the generation of reactive oxygen species. The exceptional processability and biosafety of Ag2O@UMOPs make them ideal organic coating materials for convenient application on various substrates. These remarkable features of Ag2O@UMOPs provide an effective platform for potential antibacterial applications in biological sciences.

Enhancing diabetic wound healing: advances in electrospun scaffolds from pathogenesis to therapeutic applications.

Diabetic wounds are a significant subset of chronic wounds characterized by elevated levels of inflammatory cytokines, matrix metalloproteinases (MMPs), and reactive oxygen species (ROS). They are also associated with impaired angiogenesis, persistent infection, and a high likelihood of hospitalization, leading to a substantial economic burden for patients. In severe cases, amputation or even mortality may occur. Diabetic foot ulcers (DFUs) are a common complication of diabetes, with up to 25% of diabetic patients being at risk of developing foot ulcers over their lifetime, and more than 70% ultimately requiring amputation. Electrospun scaffolds exhibit a structural similarity to the extracellular matrix (ECM), promoting the adhesion, growth, and migration of fibroblasts, thereby facilitating the formation of new skin tissue at the wound site. The composition and size of electrospun scaffolds can be easily adjusted, enabling controlled drug release through fiber structure modifications. The porous nature of these scaffolds facilitates gas exchange and the absorption of wound exudate. Furthermore, the fiber surface can be readily modified to impart specific functionalities, making electrospinning nanofiber scaffolds highly promising for the treatment of diabetic wounds. This article provides a concise overview of the healing process in normal wounds and the pathological mechanisms underlying diabetic wounds, including complications such as diabetic foot ulcers. It also explores the advantages of electrospinning nanofiber scaffolds in diabetic wound treatment. Additionally, it summarizes findings from various studies on the use of different types of nanofiber scaffolds for diabetic wounds and reviews methods of drug loading onto nanofiber scaffolds. These advancements broaden the horizon for effectively treating diabetic wounds.

Sketch2Stress: Sketching With Structural Stress Awareness.

In the process of product design and digital fabrication, the structural analysis of a designed prototype is a fundamental and essential step. However, such a step is usually invisible or inaccessible to designers at the early sketching phase. This limits the user's ability to consider a shape's physical properties and structural soundness. To bridge this gap, we introduce a novel approach Sketch2Stress that allows users to perform structural analysis of desired objects at the sketching stage. This method takes as input a 2D freehand sketch and one or multiple locations of user-assigned external forces. With the specially-designed two-branch generative-adversarial framework, it automatically predicts a normal map and a corresponding structural stress map distributed over the user-sketched underlying object. In this way, our method empowers designers to easily examine the stress sustained everywhere and identify potential problematic regions of their sketched object. Furthermore, combined with the predicted normal map, users are able to conduct a region- wise structural analysis efficiently by aggregating the stress effects of multiple forces in the same direction. Finally, we demonstrate the effectiveness and practicality of our system with extensive experiments and user studies.