Physics-informed neural network for phase imaging based on transport of intensity equation.

Non-interferometric quantitative phase imaging based on Transport of Intensity Equation (TIE) has been widely used in bio-medical imaging. However, analytic TIE phase retrieval is prone to low-spatial frequency noise amplification, which is caused by the illposedness of inversion at the origin of the spectrum. There are also retrieval ambiguities resulting from the lack of sensitivity to the curl component of the Poynting vector occurring with strong absorption. Here, we establish a physics-informed neural network (PINN) to address these issues, by integrating the forward and inverse physics models into a cascaded deep neural network. We demonstrate that the proposed PINN is efficiently trained using a small set of sample data, enabling the conversion of noise-corrupted 2-shot TIE phase retrievals to high quality phase images under partially coherent LED illumination. The efficacy of the proposed approach is demonstrated by both simulation using a standard image database and experiment using human buccal epitehlial cells. In particular, high image quality (SSIM = 0.919) is achieved experimentally using a reduced size of labeled data (140 image pairs). We discuss the robustness of the proposed approach against insufficient training data, and demonstrate that the parallel architecture of PINN is efficient for transfer learning.

In situ melt pool measurements for laser powder bed fusion using multi sensing and correlation analysis.

Laser powder bed fusion is a promising technology for local deposition and microstructure control, but it suffers from defects such as delamination and porosity due to the lack of understanding of melt pool dynamics. To study the fundamental behavior of the melt pool, both geometric and thermal sensing with high spatial and temporal resolutions are necessary. This work applies and integrates three advanced sensing technologies: synchrotron X-ray imaging, high-speed IR camera, and high-spatial-resolution IR camera to characterize the evolution of the melt pool shape, keyhole, vapor plume, and thermal evolution in Ti-6Al-4V and 410 stainless steel spot melt cases. Aside from presenting the sensing capability, this paper develops an effective algorithm for high-speed X-ray imaging data to identify melt pool geometries accurately. Preprocessing methods are also implemented for the IR data to estimate the emissivity value and extrapolate the saturated pixels. Quantifications on boundary velocities, melt pool dimensions, thermal gradients, and cooling rates are performed, enabling future comprehensive melt pool dynamics and microstructure analysis. The study discovers a strong correlation between the thermal and X-ray data, demonstrating the feasibility of using relatively cheap IR cameras to predict features that currently can only be captured using costly synchrotron X-ray imaging. Such correlation can be used for future thermal-based melt pool control and model validation.