Plasma-Assisted Surface Modification on the Electrode Interface for Flexible Fiber-Shaped Zn-Polyaniline Batteries.

A novel flexible fiber-shaped zinc-polyaniline battery (FZPB) is proposed to enhance the electrochemical performance, mass loading, and stability of polyaniline cathodes. To this end, electron-cyclotron-resonance oxygen plasma-modified carbon fibers are employed. During plasma treatment, on the carbon-fiber surface, O2+ plasma breaks the C-C, C-H, and C-N bonds to form C radicals, while the O2 molecules are broken down to reactive oxygen species (O+, O2+, O2+, and O22+). The C radicals and the reactive oxygen species are combined to homogeneously form oxygen functional groups, such as -OH, -COOH, and -C═O. The surface area and total pore volume of the treated carbon fibers increase as the plasma attacks. During electrodeposition, aniline interacts with the oxygen functional groups to form N-O and N-H bonds and π-π stacking, resulting in a homogeneous and high-loading polyaniline structure and improved adhesion between polyaniline and carbon fibers. In an FZPB, the cathode with plasma-treated carbon fibers and a polyaniline loading of 0.158 mg mgCF-1 (i.e., 2.36 mg cmCF-1) exhibits a capacity retention of 95.39% after 200 cycles at 100 mA g-1 and a discharge capacity of 83.96 mA h g-1 at such a high current density of 2000 mA g-1, which are ∼1.67 and 1.24 times those of the pristine carbon-fiber-based one, respectively. Furthermore, the FZPB exhibits high flexibility with a capacity retention of 86.4% after bending to a radius of 2.5 mm for 100 cycles as a wearable energy device.

Self-Relaxant Superelastic Matrix Derived from C60 Incorporated Sn Nanoparticles for Ultra-High-Performance Li-Ion Batteries.

Homogeneously dispersed Sn nanoparticles approximately ⩽10 nm in a polymerized C60 (PC60) matrix, employed as the anode of a Li-ion battery, are prepared using plasma-assisted thermal evaporation coupled by chemical vapor deposition. The self-relaxant superelastic characteristics of the PC60 possess the ability to absorb the stress-strain generated by the Sn nanoparticles and can thus alleviate the problem of their extreme volume changes. Meanwhile, well-dispersed dot-like Sn nanoparticles, which are surrounded by a thin SnO2 layer, have suitable interparticle spacing and multilayer structures for alleviating the aggregation of Sn nanoparticles during repeated cycles. The Ohmic characteristic and the built-in electric field formed in the interparticle junction play important roles in enhancing the diffusion and transport rate of Li ions. SPC-50, a Sn-PC60 anode consisting of 50 wt % Sn and 50 wt % PC60, as confirmed by energy-dispersive X-ray spectroscopy analysis, exhibited the highest electrochemical performance. The resulting SPC-50 anode, in a half-cell configuration, exhibited an excellent capacity retention of 97.18%, even after 5000 cycles at a current density of 1000 mA g-1 with a discharge capacity of 834.25 mAh g-1. In addition, the rate-capability performance of this SPC-50 half-cell exhibited a discharge capacity of 544.33 mAh g-1 at a high current density of 10 000 mA g-1, even after the current density was increased 100-fold. Moreover, a very high discharge capacity of 1040.09 mAh g-1 was achieved with a capacity retention of 98.67% after 50 cycles at a current density of 100 mA g-1. Futhermore, a SPC-50 full-cell containing the LiCoO2 cathode exhibited a discharge capacity of 801.04 mAh g-1 and an areal capacity of 1.57 mAh cm-2 with a capacity retention of 95.27% after 350 cycles at a current density of 1000 mA g-1.

ZnO Nanorod Array Modified PVDF Membrane with Superhydrophobic Surface for Vacuum Membrane Distillation Application.

The vacuum membrane distillation (VMD) is a promising technology for lots of applications. To solve the membrane fouling and wetting problems, in this paper, a novel ZnO nanorods 1 H,1 H,2 H,2 H-perfluorodecyltriethoxysilane (PDTS) modified poly(vinylidene fluoride) (PVDF) membrane with a micro/nanoscale hierarchical structure and a superhydrophobic surface has been prepared and applied to the VMD process for distilling highly salty water, for the first time. Among these, a pyrolysis-adhesion method is created to obtain the ZnO seeds and fasten them on the PVDF substrate firmly. The novel modified membrane shows a stable superhydrophobic surface with a water contact angle of 152°, easy cleaning property, excellent thermal and mechanical stability, because of the Cassie's state caused by pocketing much air in the hydrophobized ZnO nanorods, the low surface energy of PDTS coating, and the strong adhesion between ZnO nanorods and PVDF membrane, which has built an ideal structure for VMD application. After 8 h VMD of 200 g L-1 NaCl solution, compared to the virgin PVDF membrane, the novel membrane shows a similar permeate flux but a much higher quality permeated liquid because of its unique antifouling and antiwetting caused by the several microns gap between the feed and the membrane. Due to its easy cleaning property, the novel membrane also exhibits an excellent reusability.