RESUMO
2D cell cultures are suitable for rapid exploration of the factors in the extracellular matrix affecting the development of cells. The technology of the micrometre-sized hydrogel array provides a feasible, miniaturized, and high-throughput strategy for the process. However, current microarray devices lack a handy and parallelized methodology in sample treatment, which makes the process of high-throughput cell screening (HTCS) expensive and inefficient. Here, based on the functionalization of micro-nano structures and the fluid control capability of microfluidic chips, we build a microfluidic spotting-screening platform (MSSP). The MSSP can print 20000 microdroplet spots within 5 min, coupled with a simple strategy for parallel addition of compound libraries. Compared with open microdroplet arrays, the MSSP can control the evaporation rate of nanoliter droplets, providing a stable fabrication platform for hydrogel-microarray-based materials. As a proof-of-concept demonstration, the MSSP successfully controlled the adhesion, adipogenic, and osteogenic differentiation behavior of mesenchymal stem cells by rationally designing the substrate stiffness, adhesion area, and cell density. We anticipate that the MSSP may provide an accessible and promising tool for hydrogel-based HTCS. STATEMENT OF SIGNIFICANCE: High-throughput screening of cells is a common approach to improve the efficiency of biological experiments, and one challenge of the existing technologies is to achieve rapid and precise cell screening with a low-cost and simple strategy. Through the integration of the microfluidic and micro-nanostructure technologies, we fabricated a microfluidic spotting-screening platforms. Benefiting from the flexible control of the fluids, the device can print 20000 microdroplet spots within 5 min, coupled with a simple procedure for parallel addition of compound libraries. High-throughput screening of stem cell lineage specification has also been achieved by the platform, which provides a high-throughput, high-content information extraction strategy for cell-biomaterial interaction research.
Assuntos
Hidrogéis , Microfluídica , Microfluídica/métodos , Ensaios de Triagem em Larga Escala/métodos , Linhagem da Célula , Osteogênese , Impressão TridimensionalRESUMO
Herein we present a micro-nanostructure integrated liquid pressure sensor, which features an ultra-high sensitivity of 16.71 mbar-1, a low-pressure regime of 2 mbar, a trace sample volume of less than 1.3 µL and a visible display element. The measurable pressure ranges of the sensors include not only from micro-scale fluids to bulk liquids but also from hydraulic pressures to blood pressures, opening a window for liquid pressure sensing in lab-on-chip platforms, point-of-care diagnostics, and even robotics.
Assuntos
Técnicas Biossensoriais , Dispositivos Lab-On-A-Chip , Nanoestruturas/química , Testes Imediatos , Pressão Sanguínea , HumanosRESUMO
Ultramicro-volume syringes were fabricated by integrating micro-nanostructure arrays in microchannels for quantitatively dispensing sub-picoliter volumes of liquids. Using this system, liquids were dispensed in volume increments as low as 0.5 pL with 96% accuracy. Specifically, the controllable synthesis of nanocrystals was achieved using a lab-on-chip platform that was integrated with the syringes.
RESUMO
This article shows a new strategy for the fabrication of nanofluidics based on nanoscale gaps in nanopillar arrays. Silicon nanopillar arrays are prepared in a designed position by combining conventional photolithography with colloidal lithography. The nanogaps between the pillars are used as nanochannels for the connection of two polydimethylsiloxane-based microchannels in microfluidics. The gap between neighbouring nanopillars can be accurately controlled by changing the size of initial colloidal spheres and by an etching process, which further determines the dimensions of the nanochannels. At a low ionic strength, the surface charge-governed ion transportation shows that the nanochannels possess the same electrokinetic properties as typical nanofluidics. Benefiting from the advantage of photolithography, large-area nanochannel arrays can be prepared in a parallel manner. Due to the perm-selectivity of the nanochannels, the nanofluidic chips can be used to preconcentrate low concentration samples. The large-area ordered nanostructures preserve their high-throughput property and large surface-to-volume ratio, which shows their great potential in the development of nanofluidics and their applications, such as in the separation of small molecules, energy conversion, etc.
RESUMO
In this paper, we report the preparation of anisotropic wetting surfaces that could control various wetting behaviors of liquids in a wide surface tension range (from water to oil), which could be employed as a platform for controlling the flow of liquids in microfluidics (MFs). The anisotropic wetting surfaces are chemistry-asymmetric "Janus" silicon cylinder arrays, which are fabricated via selecting and regulating the functional groups on the surface of each cylinder unit. Liquids (in a wide surface tension range) wet in a unidirectional manner along the direction that was modified by the group with large surface energy. Through introducing the Janus structure into a T-shaped pattern and integrating it with an identical T-shaped poly(dimethylsiloxane) microchannel, the as-prepared chips can be utilized to perform as a surface tension admeasuring apparatus or a one-way valve for liquids in a wide surface tension range, even oil. Furthermore, because of the excellent ability in controlling the flowing behavior of liquids in a wide surface tension range in an open system or a microchannel, the anisotropic wetting surfaces are potential candidates to be applied both in open MFs and conventional MFs, which would broaden the application fields of MFs.
RESUMO
We report the unidirectional wetting behavior of liquids (water and oil) on Janus silicon cylinder arrays (Si-CAs) under various media (air, water, and oil). The Janus cylinders were prepared by chemical modification of nanocylinders with different molecules on two sides. Through adjusting surface energies of the modified molecules, the as-prepared surfaces could control the wetting behavior of different types of liquids under various media. We discuss the regularity systematically and propose a strategy for preparing anisotropic wetting surfaces under arbitrary media. That is, to find two surface modification molecules with different surface energies, one of the molecules is easy to be wetted by the liquid under the corresponding media, while the other one is difficult. Additionally, by introducing thermal-responsive polymer brushes onto one part of Janus Si-CAs, the surfaces show thermal-responsive anisotropic wetting property under various media. We believe that due to the excellent unidirectional wettability under various media, the Janus surfaces could be applied in water/oil transportation, oil-repellent and self-cleaning coatings, water/oil separation, microfluidics, and so on.
RESUMO
We show morphology-patterned stripes modified by thermal-responsive polymer for smartly guiding flow motion of fluid in chips. With a two-step modification process, we fabricated PNIPAAm-modified Si stripes on silicon slides, which were employed as substrates for fluid manipulation in microchannels. When the system temperature switches between above and below the lower critical solution temperature (LCST) of PNIPAAm, the wettability of the substrates also switches between strong anisotropy and weak anisotropy, which resulted in anisotropic (even unidirectional) flow and isotropic flow behavior of liquid in microchannels. The thermal-responsive flow motion of fluid in the chip is influenced by the applied pressure, the thickness of PNIPAAm, and dimension of the microchannels. Moreover, we measured the feasible applied pressure scopes under different structure factors. Because of the excellent reversibility and quick switching speed, the chip could be used as a thermal-responsive microvalve. Through tuning the system temperature and adding the assistant gas, we realized successive "valve" function. We believe that the practical and simple chip could be widely utilized in medical detection, immunodetection, protein analysis, and cell cultures.
Assuntos
Microfluídica/métodos , Resinas Acrílicas/química , Anisotropia , Propriedades de Superfície , Temperatura , MolhabilidadeRESUMO
This article shows morphology-patterned stripes as a new platform for directing flow guidance of the fluid in microfluidic devices. Anisotropic (even unidirectional) spreading behavior due to anisotropic wetting of the underlying surface is observed after integrating morphology-patterned stripes with a Y-shaped microchannel. The anisotropic wetting flow of the fluid is influenced by the applied pressure, dimensions of the patterns, including the period and depth of the structure, and size of the channels. Fluids with different surface tensions show different flowing anisotropy in our microdevice. Moreover, the morphology-patterned surfaces could be used as a microvalve, and gas-water separation in the microchannel was realized using the unidirectional flow of water. Therefore, benefiting from their good performance and simple fabrication process, morphology-patterned surfaces are good candidates to be applied in controlling the fluid behavior in microfluidics.