Highly Efficient and Stable Organic Photovoltaic Cells for Underwater Applications.

Organic photovoltaic (OPV) technology holds tremendous promise as a sustainable power source for underwater off-grid systems. However, research on underwater OPV cells is relatively scarce. Here, this gap is addressed by focusing on the exploration and development of OPV cells specifically designed for underwater applications. An acceptor, named ITO-4Cl, with excellent water resistance, is rationally designed and synthesized. Benefiting from its low energetic disorder and an absorption spectrum well-suited to the underwater environment, the ITO-4Cl-based OPV cell achieves an unprecedented power conversion efficiency (PCE) of over 25.6% at a water depth of 1 m. Additionally, under 660 nm laser irradiation, the cell demonstrates a notable PCE of 31.6%, indicating its potential for underwater wireless energy transfer. Due to the mitigation of thermal effects from solar irradiation, the lifetime of the ITO-4Cl-based OPV cell exceeds 7000 h. Additionally, a flexible OPV cell is fabricated that maintains its initial PCE even under exposure to high pressures of 5 MPa. A 32.5 cm2 flexible module achieves an excellent PCE of 17%. This work fosters a deeper understanding of underwater OPV cells and highlights the promising prospects of OPV cells for underwater applications.

Interface Reactive Sputtering of Transparent Electrode for High-Performance Monolithic and Stacked Perovskite Tandem Solar Cells.

Sputtered indium tin oxide (ITO) fulfills the requirements of top transparent electrodes (TTEs) in semitransparent perovskite solar cells (PSCs) and stacked tandem solar cells (TSCs), as well as of the recombination layers in monolithic TSCs. However, the high-energy ITO particles will cause damage to the devices. Herein, the interface reactive sputtering strategy is proposed to construct cost-effective TTEs with high transmittance and excellent carrier transporting ability. Polyethylenimine (PEI) is chosen as the interface reactant that can react with sputtered ITO nanoparticles, so that, coordination compounds can be formed during the deposition process, facilitating the carrier transport at the interface of C60/PEI/ITO. Besides, the impact force of energetic ITO particles is greatly alleviated, and the intactness of the underlying C60 layer and perovskite layer is guaranteed. Thus, the prepared semitransparent subcells achieve a significantly enhanced power conversion efficiency (PCE) of 19.17%, surpassing those based on C60/ITO (11.64%). Moreover, the PEI-based devices demonstrate excellent storage stability, which maintains 98% of their original PCEs after 2000 h. On the strength of the interface reactive sputtering ITO electrode, a stacked all-perovskite TSC with a PCE of 26.89% and a monolithic perovskite-organic TSC with a PCE of 24.33% are successfully fabricated.

Research Advances of Nonfused Ring Acceptors for Organic Solar Cells.

The last few decades have witnessed the rapid development of organic solar cells (OSCs). High power conversion efficiencies (PCEs) of over 19% have been successfully achieved due to the emergence of fused-ring acceptors (FRAs). However, the high complexity and low yield for the material synthesis result in high production costs of FRAs, limiting the further commercial application of OSCs. In contrast, nonfused ring acceptors (NFRAs) with the merits of facile synthesis, high yield, and preferable stability can promote the development of low-cost OSCs. Currently, the PCEs of NFRAs-based OSCs have exceeded 17%, which is expected to reach efficiency comparable to that of the FRAs-based OSCs. This review describes the advantages of the recent advances in NFRAs, which emphasizes exploring how the chemical structures of NFRAs influence molecular conformation, aggregation, and packing modes. In addition, the further development of NFRA materials is prospected from molecular design, morphological control, and stability perspectives.

One-Step Extrusion Preparation for Low-Cost Multicolored Carbon Dot Fluorescent Films.

Carbon dots (CDs), an emerging class of environmentally friendly luminescent materials, have been extensively applied in full-color display of light-emitting diodes (LEDs). However, the synthesis of CDs usually requires high pressure, and the conventional preparation of CD-based LED films involves intricate manufacturing techniques. The resulting security risk and high cost restrict the further application of CD-based LEDs. Here, we present a cost-effective method to obtain CD-based LED films via in situ extrusion in a twin-screw extruder. By fine-tuning the extrusion temperature, we created blue-emitting LEDs. The resulting fluorescent films exhibited remarkable stability, retaining 94% fluorescence intensity after 180 days of storage. We also prepared yellow, pure white, and cool white LEDs with malleable shapes, validating the versatility of the in situ extrusion method. More importantly, the manufacturing cost for CD-based films amounts to only about 0.8 RMB/g, which is substantially lower than that of the reported preparation methods. This work offers a cost-effective, safe, and massive approach to preparing photoluminescent LEDs, paving the way for the development of more sustainable and efficient CD-based LEDs.

Bright Blue Emission Lead-Free Halides with Narrow Bandwidth Enabled by Oversaturated Europium Doping.

Eu2+-based lead-free metal halide nanocrystals (LFMH NCs), including CsEuCl3 NCs and CsX:Eu2+ NCs (X = Cl or Br), exhibit highly efficient narrow-band blue photoluminescence, making them competitive candidates for next-generation lighting and displays. However, the growing mechanism of the aforementioned NCs lacks in-depth study, which hinders the development of Eu2+-based nanomaterials. Herein, we demonstrate the colloidal synthesis of CsBr:Eu2+ NCs based on an air-stable europium source. The NCs show deep blue photoluminescence centered at 444 nm, with a maximum photoluminescence quantum yield (PLQY) reaching 53.4% and a fwhm of 30 nm. We further reveal the mechanism that determines CsBr host growth and Eu2+ doping in CsBr:Eu2+ nanocrystals, especially dopant trapping and self-purification, that determine the PLQY level. Pure white, warm white, and cold white LEDs are fabricated based on CsBr:Eu2+ NCs, red and green phosphors, and their performance suits the needs of high-quality lighting.

Amphoteric Ion Bridged Buried Interface for Efficient and Stable Inverted Perovskite Solar Cells.

Synergistic morphology and defects management at the buried perovskite interface are challenging but crucial for the further improvement of inverted perovskite solar cells (PerSCs). Herein, an amphoteric organic salt, 2-(4-fluorophenyl)ethylammonium-4-methyl benzenesulfonate (4FPEAPSA), is designed to optimize the film morphology and energy level alignment at the perovskite buried interface. 4FPEAPSA treatment promotes the growth of a void-free, coarse-grained, and hydrophobic film by inducing the crystal orientation. Besides, the dual-functional 4FPEAPSA can chemically interact with the perovskite film, and passivate the defects of iodine and formamidine vacancies, tending to revert the fermi level of perovskite to its defect-free state. Meanwhile, the formation of a p-type doping buried interface can facilitate the interfacial charge extraction and transport of PerSCs for reduced carrier recombination loss. Consequently, 4FPEAPSA treatment improves the efficiency of the perovskite devices to 25.03% with better storage, heat, and humidity stability. This work contributes to strengthening the systematic understanding of the perovskite buried interface, providing a synergetic approach to realize precise morphology control, effective defect suppression, and energy level alignment for efficient PerSCs.

Thermodynamic Phase Transition of Three-Dimensional Solid Additives Guiding Molecular Assembly for Efficient Organic Solar Cells.

Fine-tuning the thermodynamic self-assembly of molecules via volatile solid additives has emerged to be an effective way to construct high-performance organic solar cells. Here, three-dimensional structured solid molecules have been designed and applied to facilitate the formation of organized molecular assembly in the active layer. By means of systematic theory analyses and film-morphology characterizations based on four solid candidates, we preselected the optimal one, 4-fluoro-N,N-diphenylaniline (FPA), which possesses good volatility and strong charge polarization. The three-dimensional solids can induce molecular packing in active layers via strong intermolecular interactions and subsequently provide sufficient space for the self-reassembly of active layers during the thermodynamic transition process. Benefitting from the optimized morphology with improved charge transport and reduced energy disorder in the FPA-processed devices, high efficiencies of over 19 % were achieved. The strategy of three-dimensional additives inducing ordered self-assembly structure represents a practical approach for rational morphology control in highly efficient devices, contributing to deeper insights into the structural design of efficient volatile solid additives.

Functional characterisation of Fe (II) and 2OG-dependent dioxygenase TcALKBH4 in the red flour beetle, Tribolium castaneum.

Alpha-ketoglutarate-dependent dioxygenase ALKB homologue 4 (ALKBH4) is a member of the Fe (II) and 2-oxoglutarate-dependent ALKB homologue family that plays important roles in epigenetic regulation by alkyl lesions removal in mammals. However, the roles of ALKBH4 in insects are not clear. Here, TcALKBH4 was cloned and functionally characterised in Tribolium castaneum. Temporal expression revealed that TcALKBH4 was highly expressed in early embryos and early pupae. Spatial expression showed that TcALKBH4 was highly expressed in the adult testis, and followed by the ovary. RNA interference targeting TcALKBH4 at different developmental stages in T. castaneum led to apparent phenotypes including the failure of development in larvae, the reduction of food intake and the deficiency of fertility in adult. However, further dot blot analyses showed that TcALKBH4 RNAi does not seem to influence 6 mA levels in vivo. qRT-PCR was used to further explore the underlying molecular mechanisms; the result showed that TcALKBH4 mediates the development of larvae possibly through 20E signalling pathway, and the fertility of female and male adult might be regulated by the expression of vitellogenesis and JH signalling pathway, respectively. Altogether, these findings will provide new insights into the potential function of ALKBH4 in insects.

Managing Interfacial Charged Defects with Multiple Active Sited Macrocyclic Valinomycin for Efficient and Stable Inverted Perovskite Solar Cells.

The unavoidably positively and negatively charged defects at the interface between perovskite and electron transport layer (ETL) often lead to severe surface recombination and unfavorable energy level alignment in inverted perovskite solar cells (PerSCs). Inserting interlayers at this interface is an effective approach to eliminate charged defects. Herein, the macrocyclic molecule valinomycin (VM) with multiple active sites of ─C═O, ─NH, and ─O─ is employed as an interlayer at the perovskite/ETL contact to simultaneously eliminate positively and negatively charged defects. Combined with a series of theoretical calculations and experimental analyzes, it is demonstrated that the ─C═O and ─O─ groups in VM can immobilize the uncoordinated Pb2+ to manage the positively charged defect and the formation of N─H···I hydrogen bonding can recompense the formamidine vacancies to eliminate the negatively charged defect. In addition, the VM interlayer induces a favorable downshift band bending at the perovskite/ETL interface, facilitating charge separation and boosting charge transfer. Thanks to the reduced charged defects and favorable energy level alignment, the fabricated inverted PerSC delivers an outstanding power conversion efficiency of 24.06% with excellent long-term ambient and thermal stability. This work demonstrates that managing charged defects via multiple functional groups and simultaneously regulating energy level alignment is a reliable strategy to boost the performance of PerSCs.

Triphenylamine-Derived Solid-State Emissive Carbon Dots for Multicolor High-Efficiency Electroluminescent Light-Emitting Diodes.

Two kinds of triphenylamine-derived solid-state emissive carbon dots (CDs) with orange and yellow color are facilely synthesized through solvothermal treatment, taking advantage of the nonplanar structure and good carrier mobility of triphenylamine unit. Theoretical calculations show that the triphenylamine structure could greatly inhibit the direct π-π stacking of aromatic skeletons and enhance the fluorescence properties of CDs in aggregation state. By adopting the CDs as single emissive layer, high-performance orange-color and green-color electroluminescent light-emitting diodes (LEDs) are successfully fabricated, with maximum brightness of 9450/4236 cd m-2 , high current efficiency of 1.57/2.34 cd A-1 and low turn-on voltage of 3.1/3.6 eV are respectively achieved. Significantly, white-color LED device is further prepared. This work provides a universal platform for the construction of novel solid-state emissive CDs with significant applications in photoelectric device.

A novel GSTe2 involved in metamorphosis by regulating 20E signal pathway in Tribolium castaneum.

Insect-specific epsilon glutathion S-transferases (GSTs) are a class of multifunctional GST superfamily, which play important roles in detoxification of xenobiotic substances. Most research on GSTs has focused on insecticide detoxification and resistance, with little research on other physiological functions. Here, we identified and cloned the novel GSTe2 from Tribolium castaneum (TcGSTe2). Recombinant TcGSTe2 protein was successfully overexpressed in Escherichia coli and purified with affinity purification, which had high ability to catalyze the conjugation of reduced glutathione with 1-chloro-2,4-dinitrobenzene (CDNB). The expression level of TcGSTe2 was significantly decreased after exposure with four insecticides, phoxim, λ-cyhalothrin, dichlorvos, and carbofuran, in larval stage. Interestingly, RNA interference knockdown of TcGSTe2 caused metamorphosis deficiency in larval and pupal stages by inhibiting the 20E signal pathway. Furthermore, exogenous 20E injection partially rescued this metamorphosis deficiency and also increased the expression levels of 20E downstream response genes. This study illustrated TcGSTe2 plays an important role at metamorphosis beside the insecticide detoxification and resistance in T. castaneum.

A C-type lectin TcCTL1 is required for embryogenesis in Tribolium castaneum.

C-type lectin S group (CTL-S) plays a variety of roles in invertebrate including pathogen recognition and activation of immune responses. Previous studies have shown that CTL-S subfamily of Tribolium castaneum is mainly divided into two clades, of which only TcCTL1 was separately located in one clade. However, it remains unclear whether TcCTL1 occurs the differentiation of function. Therefore, the CTL-S TcCTL1 gene was cloned and characterized from T. castaneum. Functional analysis revealed that TcCTL1 could recognize and agglutinate pathogens, as well as activate immune signaling pathways to participate in immune response, which was consistent with our previously reported for TcCTL5 and TcCTL6. Differently, RNAi of TcCTL1 discovered that the egg produced by dsTcCTL1-treated adult could not hatch into larvae. Further DAPI-straining embryo indicated that the process of embryogenesis in dsTcCTL1-treated beetle was defeated, implying that TcCTL1 is required for embryogenesis in T. castaneum except for immune response. These results will aid implications for the understanding of CTL-S in invertebrate.

Self-Aggregated Light-Trapping Nanodots for Highly Efficient Organic Solar Cells.

The typical thickness of the photoactive layer in organic solar cells (OSCs) is around 100 nm, which limits the absorption efficiency of the incident light and the power conversion efficiency (PCE) of OSCs. Therefore, light-trapping schemes to reduce the optical losses in the thin photoactive layers are critically important for efficient OSCs. Herein, light-trapping and electron-collection dual-functional small organic molecules, N,N,N',N'-tetraphenyloxalamide (TPEA) and N,N,N',N'-tetraphenylmalonamide (TPMA), are designed and synthesized by a one-step acylation reaction. Driven by strong intermolecular force, TPEA and TPMA tend to self-aggregate into hemispherical light-trapping nanodots on the photoactive layer, resulting in enhanced light harvesting. Meanwhile, TPEA and TPMA demonstrate high electron mobility and excellent electron-collection ability.  Compared with the device without cathode buffer layer (CBL, PCE = 14.09%), PM6:BTP-eC9 based OSCs with TPEA and TPMA light-trapping CBLs demonstrate greatly enhanced PCE of 16.21% and 17.85%, respectively. Furthermore, a record PCE of 19.02% can be achieved for PM6:BTP-eC9:PC71 BM based ternary OSC with TPMA light-trapping CBL. Moreover, TPMA exhibits a low synthesis cost of only 0.61 $ g-1 with high yield. These findings could open a window for the rational design of multifunctional CBLs for efficient and stable OSCs.

Bismuth Complex Controlled Morphology Evolution and CuSCN-Induced Transport Improvement Enable Efficient BiI3 Solar Cells.

Bismuth triiodide (BiI3) is a particularly promising absorber material for inorganic thin-film solar cells due to its merits of nontoxicity and low cost. However, one key factor that limits the efficiency of BiI3 solar cells is the film morphology, which is strongly correlated with the trap states of the BiI3 film. Herein, we report a coordination engineering strategy by using Lewis base dimethyl sulfoxide (DMSO) to induce the formation of a stable BiI3(DMSO)2 complex for controlling the morphology of BiI3 films. Density functional theory calculations further provide a theoretical framework for understanding the interaction of the BiI3(DMSO)2 complex with BiI3. The obtained BiI3(DMSO)2 complex could assist the fabrication of highly uniform and pinhole-free films with preferred crystallographic orientation. This high-quality film enables reduced trap densities, a suppressed charge recombination, and improved carrier mobility. In addition, the use of copper(I) thiocyanate (CuSCN) as a hole transport layer improves the charge transport, enabling the realization of solar cells with a record power conversion efficiency of 1.80% and a champion fill factor of 51.5%. Our work deepens the insights into controlling the morphology of BiI3 thin films through the coordination engineering strategy and paves the way toward further improving the photovoltaic performances of BiI3 solar cells.

Characterization and expression profiling of G protein-coupled receptors (GPCRs) in Spodoptera litura (Lepidoptera: Noctuidae).

Spodoptera litura is a highly destructive omnivorous pest, and they caused serious damage to various crops. G protein-coupled receptors (GPCRs) mediate dozens of physiological processes including reproduction, development, life span and behaviors, but the information of these receptors has been lacking in S. litura. Here, we methodically identified 122 GPCRs in S. litura and made an assay of their expression patterns in different tissues. Comparing the identified GPCRs with homologous genes of other insects, it is obvious that the subfamily A2 (biogenic amine receptors) and the subfamily A3 (neuropeptide and protein hormone receptors) of S. litura have expanded to a certain extent, which may be related to the omnivorous nature and drought environment resistance of S. litura. Besides, the large Methuselah (Mth)/Methuselah-like (Mthl) subfamily of S. litura may be involved in many physiological functions such as longevity and stress response. Apart from duplicate receptors, the loss of parathyroid hormone receptor (PTHR) and the bride of sevenless (Boss) receptor in the lepidopteran insects may imply a new pattern of wing formation and energy metabolism in lepidopteran insects. In addition, the high expression level of GPCRs in different tissues reflects the functional diversity of GPCRs regulating. Systemic identification and initial characterization of GPCRs in S. litura provide a basis for further studies to reveal the functions of these receptors in regulating physiology and behavior.

Molecular and functional analysis of eclosion hormone-like gene involved in post-eclosion behavior in a beetle.

Eclosion hormone (EH) is a neurohormone that plays a key role in the regulation of insect pre-ecdysis behavior at the end of each molt. Previous research has reported more than one EH gene was found in certain insects, with their functions and mechanisms still unclear. Here, aside from the classical EH gene orthologous group, we characterized another novel orthologous cluster of eclosion hormone-like (EHL) genes in Arthropoda and investigated the roles of EHL during development in Tribolium castaneum. T. castaneum EHL (TcEHL) shows high expression levels during pupal - adult development, which also positively responded to 20-hydroxyecdysone (20E) treatment as well as RNA interference (RNAi) of ECR (20E nuclear receptor). Knockdown of TcEHL prevented the tanning of the adult cuticle and caused lethal phenotypes. Further analysis indicated that knockdown of TcEHL could upregulate expression levels of the classical TcEH, and downregulate the ecdysis behavior cascade genes, as well as tanning pathway enzymes. This suggests a critical role for TcEHL in adult eclosion and cuticle tanning. In addition, our data indicated that TcEHL is responsible for the female reproduction process. Taken together, these results suggest that TcEHL has specific roles in adult cuticle tanning during the post-eclosion process and female reproduction. They also suggest that EHL gene is the ancestral copy for the EH family and it is functionally shuffled by synfunctionalization.

Three cytochrome P450 CYP4 family genes regulated by the CncC signaling pathway mediate phytochemical susceptibility in the red flour beetle, Tribolium castaneum.

BACKGROUND: Insect cytochrome P450 monooxygenases (P450s) play a crucial role in phytochemical metabolism and tolerance. Three P450 genes (TcCYP4Q3, TcCYP4Q5, and TcCYP4Q7) are associated with the response of eugenol in Tribolium castaneum. However, the responding mechanisms of these P450 genes to eugenol remain unknown. RESULTS: Here, spatiotemporal expression profiling revealed that TcCYP4Q3 and TcCYP4Q5 were most highly expressed in late adult, while TcCYP4Q7 was predominantly expressed in late larva; and all of these three P450 genes were mainly expressed in the fat body of larvae. Furthermore, the expressions of these three P450 genes were significantly up-regulated after exposure to eugenol, and depletion of them enhanced the susceptibility of beetles to eugenol. Interestingly, RNA interference (RNAi) against the CncC gene, a transcription factor of CncC signaling pathway associated with regulation of insect P450s in response to phytochemicals, reduced the transcripts of these three P450 genes following exposure to eugenol. Investigation of CncC signaling pathway showed that this pathway could be activated by eugenol. CONCLUSION: Altogether, the results indicate that these three P450 genes are regulated by CncC signaling pathway to participate in the susceptibility of Tribolium castaneum to phytochemicals. These findings will aid implications for the development of novel therapeutics to control pest. © 2022 Society of Chemical Industry.

Crosslinkable and Chelatable Organic Ligand Enables Interfaces and Grains Collaborative Passivation for Efficient and Stable Perovskite Solar Cells.

The organic-inorganic halide perovskite solar cell (PerSC) is the state-of-the-art emerging photovoltaic technology. However, the environmental water/moisture and temperature-induced intrinsic degradation and phase transition of perovskite greatly retard the commercialization process. Herein, a dual-functional organic ligand, 4,7-bis((4-vinylbenzyl)oxy)-1,10-phenanthroline (namely, C1), with crosslinkable styrene side-chains and chelatable phenanthroline backbone, synthesized via a cost-effective Williamson reaction, is introduced for collaborative electrode interface and perovskite grain boundaries (GBs) engineering. C1 can chemically chelate with Sn4+ in the SnO2 electron transport layer and Pb2+ in the perovskite layer via coordination bonds, suppressing nonradiative recombination caused by traps/defects existing at the interface and GBs. Meanwhile, C1 enables in situ crosslinking via thermal-initiated polymerization to form a hydrophobic and stable polymer network, freezing perovskite morphology, and resisting moisture degradation. Consequently, through collaborative interface-grain engineering, the resulting PerSCs demonstrate high power conversion efficiency of 24.31% with excellent water/moisture and thermal stability. The findings provide new insights of collaborative interface-grain engineering via a crosslinkable and chelatable organic ligand for achieving efficient and stable PerSCs.

Response of xenobiotic biodegradation and metabolic genes in Tribolium castaneum following eugenol exposure.

Eugenol, a plant-derived component possessing small side effects, has an insecticidal activity to Tribolium castaneum; however, the underlying molecular mechanisms of eugenol acting on T. castaneum are currently unclear. Here, a nerve conduction carboxylesterase and a detoxifying glutathione S-transferase were significantly inhibited after eugenol exposure, resulting in the paralysis or death of beetles. Then, RNA-sequencing of eugenol-exposed and control samples identified 362 differentially expressed genes (DEGs), containing 206 up-regulated and 156 down-regulated genes. RNA-seq data were validated further by qRT-PCR. GO analysis revealed that DEGs were associated with 1308 GO terms of which the most enriched GO terms were catalytic activity, and integral component of membrane; KEGG pathway analysis showed that these DEGs were distributed in 151 different pathways, of which some pathways associated with metabolism of xenobiotics or drug were significantly enriched, which indicated that eugenol most likely disturbed the processes of metabolism, and detoxication. Moreover, several DEGs including Hexokinase type 2, Isocitrate dehydrogenase, and Cytochrome b-related protein, might participate in the respiratory metabolism of eugenol-exposed beetles. Some DEGs encoding CYP, UGT, GST, OBP, CSP, and ABC transporter were involved in the xenobiotic or drug metabolism pathway, which suggested that these genes of T. castaneum participated in the response to eugenol exposure. Additionally, TcOBPC11/ TcGSTs7, detected by qRT-PCR and RNA-interference against these genes, significantly increased the mortality of eugenol-treated T. castaneum, providing further evidence for the involvement of OBP/GST in eugenol metabolic detoxification in T. castaneum. These results aid eugenol insecticidal mechanisms and provide the basis of insect control.

Biuret Induced Tin-Anchoring and Crystallization-Regulating for Efficient Lead-Free Tin Halide Perovskite Light-Emitting Diodes.

Lead-free perovskite emitters, particularly 2D tin (Sn) halide perovskites, have attracted considerable academic attention in recent years. However, the problems of Sn oxidation and rapid crystallization lead to an inferior perovskite morphology with high trap states, thus limiting the luminous efficiency of Sn halide perovskite light-emitting diodes (PeLEDs). In this study, the authors establish an approach by introducing an organic additive, 2-imidodicarbonic diamide (biuret), to address the issues of Sn oxidation and fast crystallization. The unique symmetrical carbonyl groups in the biuret robustly interact with the Sn-I framework, providing a strong Sn-anchoring effect. Consequently, it also suppresses the easy oxidation of Sn2+ , regulating the crystallization process simultaneously. Density functional theory (DFT) calculations also confirmed the robust interaction between the biuret and the 2D Sn halide perovskite. Furthermore, the authors demonstrate efficient PeLEDs with saturated red emission at 637 nm, a maximum luminance (Lmax ) of 418 cd m-2 , a maximum external quantum efficiency (EQEmax ) of 1.37%, and a half-life (T50 ) of 288 s. This work provides insights on the microcosmic chemical interaction between organics and 2D Sn halide perovskites, advancing the development of efficient lead-free PeLEDs.