A quantum synthetic aperture radar image denoising algorithm based on grayscale morphology.

The quantum denoising technology efficiently removes noise from images; however, the existing algorithms are only effective for additive noise and cannot remove multiplicative noise, such as speckle noise in synthetic aperture radar (SAR) images. In this paper, based on the grayscale morphology method, a quantum SAR image denoising algorithm is proposed, which performs morphological operations on all pixels simultaneously to remove the noise in the SAR image. In addition, we design a feasible quantum adder to perform cyclic shift operations. Then, quantum circuits for dilation and erosion are designed, and the complete quantum circuit is then constructed. For a 2n×2n quantum SAR image with q grayscale levels, the complexity of our algorithm is O (n+q). Compared with classical algorithms, it achieves exponential improvement and also has polynomial-level improvements than existing quantum algorithms. Finally, the feasibility of our algorithm is validated on IBM Q.

Self-Driven Photo-Polarized Water Molecule-Triggered Graphene-Based Photodetector.

Flowing water can be used as an energy source for generators, providing a major part of the energy for daily life. However, water is rarely used for information or electronic devices. Herein, we present the feasibility of a polarized liquid-triggered photodetector in which polarized water is sandwiched between graphene and a semiconductor. Due to the polarization and depolarization processes of water molecules driven by photogenerated carriers, a photo-sensitive current can be repeatedly produced, resulting in a high-performance photodetector. The response wavelength of the photodetector can be fine-tuned as a result of the free choice of semiconductors as there is no requirement of lattice match between graphene and the semiconductors. Under zero voltage bias, the responsivity and specific detectivity of Gr/NaCl (0.5 M)W/N-GaN reach values of 130.7 mA/W and 2.3 × 109 Jones under 350 nm illumination, respectively. Meanwhile, using a polar liquid photodetector can successfully read the photoplethysmography signals to produce accurate oxygen blood saturation and heart rate. Compared with the commercial pulse oximetry sensor, the average errors of oxygen saturation and heart rate in the designed photoplethysmography sensor are ~1.9% and ~2.1%, respectively. This study reveals that water can be used as a high-performance photodetector in informative industries.

High Efficient Solar Cell Based on Heterostructure Constructed by Graphene and GaAs Quantum Wells.

Despite the fascinating optoelectronic properties of graphene, the power conversion efficiency (PCE) of graphene based solar cells remains to be lifted up. Herein, it is experimentally shown that the graphene/quantum wells/GaAs heterostructure solar cell can reach a PCE of 20.2% and an open-circuit voltage (Voc ) as high as 1.16 V at 90 K. The high efficiency is a result of carrier multiplication (CM) effect of graphene in the graphene/GaAs heterostructure. Especially, the external quantum efficiency (EQE) in the ultraviolet wavelength can be improved up to 72.2% based on the heterostructure constructed by graphene/In0.15 Ga0.85 As/GaAs0.75 P0.25 quantum wells/GaAs. The EQE increases as the light wavelength decreases, which indicates more carriers can be effectively excited by the higher energy photons through CM effect. Owing to these physical characters, the graphene/GaAs heterostructure solar cell will provide a possible way to exceed Shockley-Queisser (S-Q) limit.

Broadband Insulator-Based Dynamic Diode with Ultrafast Hot Carriers Process.

The excitation, rebound, and transport process of hot carriers (HCs) inside dynamic diode (DD) based on insulators has been rarely explored due to the original stereotyped in which it was thought that the insulators are nonconductive. However, the carrier dynamics of DD is totally different from the static diode, which may bring a subverting insight of insulators. Herein, we discovered insulators could be conductive under the framework of DD; the HC process inside the rebounding procedure caused by the disappearance and reestablishment of the built-in electric field at the interface of insulator/semiconductor heterostructure is the main generation mechanism. This type of DD can response fast up to 1 µs to mechanical excitation with an output of ~10 V, showing a wide band frequency response under different input frequencies from 0 to 40 kHz. It can work under extreme environments; various applications like underwater communication network, self-powered sensor/detector in the sea environment, and life health monitoring can be achieved.

Hot Carrier Transport and Carrier Multiplication Induced High Performance Vertical Graphene/Silicon Dynamic Diode Generator.

Dynamic semiconductor diode generators (DDGs) offer a potential portable and miniaturized energy source, with the advantages of high current density, low internal impedance, and independence of the rectification circuit. However, the output voltage of DDGs is generally as low as 0.1-1 V, owing to energy loss during carrier transport and inefficient carrier collection, which requires further optimization and a deeper understanding of semiconductor physical properties. Therefore, this study proposes a vertical graphene/silicon DDG to regulate the performance by realizing hot carrier transport and collection. With instant contact and separation of the graphene and silicon, hot carriers are generated by the rebounding process of built-in electric fields in dynamic graphene/silicon diodes, which can be collected within the ultralong hot electron lifetime of graphene. In particular, monolayer graphene/silicon DDG outputs a high voltage of 6.1 V as result of ultrafast carrier transport between the monolayer graphene and silicon. Furthermore, a high current of 235.6 nA is generated due to the carrier multiplication in graphene. A voltage of 17.5 V is achieved under series connection, indicating the potential to supply electronic systems through integration design. The graphene/silicon DDG has applications as an in situ energy source for harvesting mechanical energy from the environment.

Polarized Water Driven Dynamic PN Junction-Based Direct-Current Generator.

There is a rising prospective in harvesting energy from the environment, as in situ energy is required for the distributed sensors in the interconnected information society, among which the water flow energy is the most potential candidate as a clean and abundant mechanical source. However, for microscale and unordered movement of water, achieving a sustainable direct-current generating device with high output to drive the load element is still challenging, which requires for further exploration. Herein, we propose a dynamic PN water junction generator with moving water sandwiched between two semiconductors, which outputs a sustainable direct-current voltage of 0.3 V and a current of 0.64 µA. The mechanism can be attributed to the dynamic polarization process of water as moving dielectric medium in the dynamic PN water junction, under the Fermi level difference of two semiconductors. We further demonstrate an encapsulated portable power-generating device with simple structure and continuous direct-current voltage output of 0.11 V, which exhibits its promising potential application in the field of wearable devices and the IoTs.

Wind driven semiconductor electricity generator with high direct current output based on a dynamic Schottky junction.

With the fast development of the internet of things (IoTs), distributed sensors are frequently used and small and portable power sources are highly demanded. However, current portable power sources such as lithium batteries have low capacity and need to be replaced or recharged frequently. A portable power source which can continuously generate electrical power in situ will be an ideal solution. Herein, we demonstrate a wind driven semiconductor electricity generator based on a dynamic Schottky junction, which can output a continuous direct current with an average value of 4.4 mA (with a maximum value of 8.4 mA) over 740 seconds. Compared with a previous metal/semiconductor generator, the output current is one thousand times higher. Furthermore, this wind driven generator has been used as a turn counter, due to its stable output, and also to drive a graphene ultraviolet photodetector, which shows a responsivity of 35.8 A W-1 under 365 nm ultraviolet light. Our research provides a feasible method to achieve wind power generation and power supply for distributed sensors in the future.

Van der Waals Integrated Silicon/Graphene/AlGaN Based Vertical Heterostructured Hot Electron Light Emitting Diodes.

Silicon-based light emitting diodes (LED) are indispensable elements for the rapidly growing field of silicon compatible photonic integration platforms. In the present study, graphene has been utilized as an interfacial layer to realize a unique illumination mechanism for the silicon-based LEDs. We designed a Si/thick dielectric layer/graphene/AlGaN heterostructured LED via the van der Waals integration method. In forward bias, the Si/thick dielectric (HfO2-50 nm or SiO2-90 nm) heterostructure accumulates numerous hot electrons at the interface. At sufficient operational voltages, the hot electrons from the interface of the Si/dielectric can cross the thick dielectric barrier via the electron-impact ionization mechanism, which results in the emission of more electrons that can be injected into graphene. The injected hot electrons in graphene can ignite the multiplication exciton effect, and the created electrons can transfer into p-type AlGaN and recombine with holes resulting a broadband yellow-color electroluminescence (EL) with a center peak at 580 nm. In comparison, the n-Si/thick dielectric/p-AlGaN LED without graphene result in a negligible blue color EL at 430 nm in forward bias. This work demonstrates the key role of graphene as a hot electron active layer that enables the intense EL from silicon-based compound semiconductor LEDs. Such a simple LED structure may find applications in silicon compatible electronics and optoelectronics.

Interfacial Built-In Electric Field-Driven Direct Current Generator Based on Dynamic Silicon Homojunction.

Searching for light and miniaturized functional device structures for sustainable energy gathering from the environment is the focus of energy society with the development of the internet of things. The proposal of a dynamic heterojunction-based direct current generator builds up new platforms for developing in situ energy. However, the requirement of different semiconductors in dynamic heterojunction is too complex to wide applications, generating energy loss for crystal structure mismatch. Herein, dynamic homojunction generators are explored, with the same semiconductor and majority carrier type. Systematic experiments reveal that the majority of carrier directional separation originates from the breaking symmetry between carrier distribution, leading to the rebounding effect of carriers by the interfacial electric field. Strikingly, NN Si homojunction with different Fermi levels can also output the electricity with higher current density than PP/PN homojunction, attributing to higher carrier mobility. The current density is as high as 214.0 A/m2, and internal impedance is as low as 3.6 kΩ, matching well with the impedance of electron components. Furthermore, the N-i-N structure is explored, whose output voltage can be further improved to 1.3 V in the case of the N-Si/Al2O3/N-Si structure, attributing to the enhanced interfacial barrier. This approach provides a simple and feasible way of converting low-frequency disordered mechanical motion into electricity.

Tunable Dynamic Black Phosphorus/Insulator/Si Heterojunction Direct-Current Generator Based on the Hot Electron Transport.

Static heterojunction-based electronic devices have been widely applied because carrier dynamic processes between semiconductors can be designed through band gap engineering. Herein, we demonstrate a tunable direct-current generator based on the dynamic heterojunction, whose mechanism is based on breaking the symmetry of drift and diffusion currents and rebounding hot carrier transport in dynamic heterojunctions. Furthermore, the output voltage can be delicately adjusted and enhanced with the interface energy level engineering of inserting dielectric layers. Under the ultrahigh interface electric field, hot electrons will still transfer across the interface through the tunneling and hopping effect. In particular, the intrinsic anisotropy of black phosphorus arising from the lattice structure produces extraordinary electronic, transport, and mechanical properties exploited in our dynamic heterojunction generator. Herein, the voltage of 6.1 V, current density of 124.0 A/m2, power density of 201.0 W/m2, and energy-conversion efficiency of 31.4% have been achieved based on the dynamic black phosphorus/AlN/Si heterojunction, which can be used to directly and synchronously light up light-emitting diodes. This direct-current generator has the potential to convert ubiquitous mechanical energy into electric energy and is a promising candidate for novel portable and miniaturized power sources in the in situ energy acquisition field.

Probabilistic Teleportation of Arbitrary Two-Qubit Quantum State via Non-Symmetric Quantum Channel.

Quantum teleportation has significant meaning in quantum information. In particular, entangled states can also be used for perfectly teleporting the quantum state with some probability. This is more practical and efficient in practice. In this paper, we propose schemes to use non-symmetric quantum channel combinations for probabilistic teleportation of an arbitrary two-qubit quantum state from sender to receiver. The non-symmetric quantum channel is composed of a two-qubit partially entangled state and a three-qubit partially entangled state, where partially entangled Greenberger-Horne-Zeilinger (GHZ) state and W state are considered, respectively. All schemes are presented in detail and the unitary operations required are given in concise formulas. Methods are provided for reducing classical communication cost and combining operations to simplify the manipulation. Moreover, our schemes are flexible and applicable in different situations.