Adjoint-Optimized Large Dielectric Metasurface for Enhanced Purcell Factor and Directional Photon Emission.

Extracting photons efficiently from quantum sources, such as atoms, molecules, and quantum dots, is crucial for various nanophotonic systems used in quantum communication, sensing, and computation. To improve the performance of these systems, it is not only necessary to provide an environment that maximizes the number of optical modes, but it is also desirable to guide the extracted light toward specific directions. One way to achieve this goal is to use a large area metasurface that can steer the beam. Previous work has used small aperture devices that are fundamentally limited in their ability to achieve high directivity. This work proposes an adjoint-based topology optimization approach to design a large light extractor that can enhance the spontaneous decay rate of the embedded quantum transition and collimate the extracted photons. With the help of this approach, we present all-dielectric metasurfaces for a quantum transition emitting at λ = 600 nm. These metasurfaces achieve a broadband improvement of spontaneous emission compared to that in the vacuum, reaching a 10× enhancement at the design frequency. Furthermore, they can beam the extracted light into a narrow cone (±10°) along a desired direction that is predefined through their respective design process.

A solution-processed radiative cooling glass.

Passive daytime radiative cooling materials could reduce the energy needed for building cooling up to 60% by reflecting sunlight and emitting long-wave infrared (LWIR) radiation into the cold Universe (~3 kelvin). However, developing passive cooling structures that are both practical to manufacture and apply while also displaying long-term environmental stability is challenging. We developed a randomized photonic composite consisting of a microporous glass framework that features selective LWIR emission along with relatively high solar reflectance and aluminum oxide particles that strongly scatter sunlight and prevent densification of the porous structure during manufacturing. This microporous glass coating enables a temperature drop of ~3.5° and 4°C even under high-humidity conditions (up to 80%) during midday and nighttime, respectively. This radiative "cooling glass" coating maintains high solar reflectance even when exposed to harsh conditions, including water, ultraviolet radiation, soiling, and high temperatures.

Dynamically switchable self-focused thermal emission.

The ability to manipulate thermal emission is paramount to the advancement of a wide variety of fields such as thermal management, sensing and thermophotovoltaics. In this work, we propose a microphotonic lens for achieving temperature-switchable self-focused thermal emission. By utilizing the coupling between isotropic localized resonators and the phase change properties of VO2, we design a lens that selectively emits focused radiation at a wavelength of 4 µm when operated above the phase transition temperature of VO2. Through direct calculation of thermal emission, we show that our lens produces a clear focal spot at the designed focal length above the phase transition of VO2 while emitting a maximum relative focal plane intensity that is 330 times lower below it. Such microphotonic devices capable of producing temperature-dependent focused thermal emission could benefit several applications such as thermal management and thermophotovoltaics while paving the way for next-generation contact-free sensing and on-chip infrared communication.

Thermal metasurface with tunable narrowband absorption from a hybrid graphene/silicon photonic crystal resonance.

We report the design of a tunable, narrowband, thermal metasurface that employs a hybrid resonance generated by coupling a tunable permittivity graphene ribbon to a silicon photonic crystal. The gated graphene ribbon array, proximitized to a high quality factor Si photonic crystal supporting a guided mode resonance, exhibits tunable narrowband absorbance lineshapes (Q > 10,000). Actively tuned Fermi level modulation in graphene with applied gate voltage between high absorptivity and low absorptivity states gives rise to absorbance on/off ratios exceeding 60. We employ coupled-mode theory as a computationally efficient approach to elements of the metasurface design, demonstrating an orders of magnitude speedup over typical finite element computational methods.

Compounding a High-Permittivity Thermoplastic Material and Its Applicability in Manufacturing of Microwave Photonic Crystals.

Additive Manufacturing (AM) techniques allow the production of complex geometries unattainable through other traditional technologies. This advantage lends itself well to rapidly iterating and improving upon the design of microwave photonic crystals, which are structures with intricate, repeating features. The issue tackled by this work involves compounding a high-permittivity material that can be used to produce 3D microwave photonic structures using polymer extrusion-based AM techniques. This material was acrylonitrile butadiene styrene (ABS)-based and used barium titanate (BaTiO3) ceramic as the high-permittivity component of the composite and involved the use of a surfactant and a plasticizer to facilitate processing. Initial small amounts of the material were compounded using an internal batch mixer and studied using polymer thermal analysis techniques, such as thermogravimetric analysis, rheometry, and differential scanning calorimetry to determine the proper processing conditions. The production of the material was then scaled up using a twin-screw extruder system, producing homogeneous pellets. Finally, the thermoplastic composite was used with a screw-based, material extrusion additive manufacturing technique to produce a slab for measuring the relative permittivity of the material, as well as a preliminary 3D photonic crystal. The real part of the permittivity was measured to be 12.85 (loss tangent = 0.046) in the range of 10 to 12 GHz, representing the highest permittivity ever demonstrated for a thermoplastic AM composite at microwave frequencies.

Spectral emissivity modeling in multi-resonant systems using coupled-mode theory.

The ability to design multi-resonant thermal emitters is essential to the advancement of a wide variety of applications, including thermal management and sensing. These fields would greatly benefit from the development of more efficient tools for predicting the spectral response of coupled, multi-resonator systems. In this work, we propose a semi-analytical prediction tool based on coupled-mode theory. In our approach, a complex thermal emitter is fully described by a set of coupled-mode parameters, which can be straightforwardly calculated from simulations of unit cells containing single and double resonators. We demonstrate the accuracy of our method by predicting and optimizing spectral response in a coupled, multi-resonant system based on hBN ribbons. The approach described here can greatly reduce the computational overhead associated with spectral design tasks in coupled, multi-resonant systems.

Angle-based wavefront sensing enabled by the near fields of flat optics.

There is a long history of using angle sensors to measure wavefront. The best example is the Shack-Hartmann sensor. Compared to other methods of wavefront sensing, angle-based approach is more broadly used in industrial applications and scientific research. Its wide adoption is attributed to its fully integrated setup, robustness, and fast speed. However, there is a long-standing issue in its low spatial resolution, which is limited by the size of the angle sensor. Here we report a angle-based wavefront sensor to overcome this challenge. It uses ultra-compact angle sensor built from flat optics. It is directly integrated on focal plane array. This wavefront sensor inherits all the benefits of the angle-based method. Moreover, it improves the spatial sampling density by over two orders of magnitude. The drastically improved resolution allows angle-based sensors to be used for quantitative phase imaging, enabling capabilities such as video-frame recording of high-resolution surface topography.

Vapor condensation with daytime radiative cooling.

A radiative vapor condenser sheds heat in the form of infrared radiation and cools itself to below the ambient air temperature to produce liquid water from vapor. This effect has been known for centuries, and is exploited by some insects to survive in dry deserts. Humans have also been using radiative condensation for dew collection. However, all existing radiative vapor condensers must operate during the nighttime. Here, we develop daytime radiative condensers that continue to operate 24 h a day. These daytime radiative condensers can produce water from vapor under direct sunlight, without active consumption of energy. Combined with traditional passive cooling via convection and conduction, radiative cooling can substantially increase the performance of passive vapor condensation, which can be used for passive water extraction and purification technologies.

Controlling the minimal feature sizes in adjoint optimization of nanophotonic devices using b-spline surfaces.

Adjoint optimization is an effective method in the inverse design of nanophotonic devices. In order to ensure the manufacturability, one would like to have control over the minimal feature sizes. Here we propose utilizing a level-set method based on b-spline surfaces in order to control the feature sizes. This approach is first used to design a wavelength demultiplexer. It is also used to implement a nanophotonic structure for artificial neural computing. In both cases, we show that the minimal feature sizes can be easily parameterized and controlled.

Extended Range of Dipole-Dipole Interactions in Periodically Structured Photonic Media.

The interaction between quantum two-level systems is typically short range in free space and in most photonic environments. We show that diminishing momentum isosurfaces with equal frequencies can create a significantly extended range of interaction between distant quantum systems. The extended range is robust and does not rely on a specific location or orientation of the transition dipoles. A general relation between the interaction range and properties of the isosurface is described for structured photonic media. It provides a new way to mediate long-range quantum behavior.

A Bidirectional Deep Neural Network for Accurate Silicon Color Design.

Silicon nanostructure color has achieved unprecedented high printing resolution and larger color gamut than sRGB. The exact color is determined by localized magnetic and electric dipole resonance of nanostructures, which are sensitive to their geometric changes. Usually, the design of specific colors and iterative optimization of geometric parameters are computationally costly, and obtaining millions of different structural colors is challenging. Here, a deep neural network is trained, which can accurately predict the color generated by random silicon nanostructures in the forward modeling process and solve the nonuniqueness problem in the inverse design process that can accurately output the device geometries for at least one million different colors. The key results suggest deep learning is a powerful tool to minimize the computation cost and maximize the design efficiency for nanophotonics, which can guide silicon color manufacturing with high accuracy.

Single-shot on-chip spectral sensors based on photonic crystal slabs.

Miniaturized spectrometers have significant potential for portable applications such as consumer electronics, health care, and manufacturing. These applications demand low cost and high spectral resolution, and are best enabled by single-shot free-space-coupled spectrometers that also have sufficient spatial resolution. Here, we demonstrate an on-chip spectrometer that can satisfy all of these requirements. Our device uses arrays of photodetectors, each of which has a unique responsivity with rich spectral features. These responsivities are created by complex optical interference in photonic-crystal slabs positioned immediately on top of the photodetector pixels. The spectrometer is completely complementary metal-oxide-semiconductor (CMOS) compatible and can be mass produced at low cost.

Author Correction: Subwavelength angle-sensing photodetectors inspired by directional hearing in small animals.

In the version of this Letter originally published, Zongfu Yu was mistakenly not noted as being a corresponding author; this has now been corrected in all versions of the Letter.

Subwavelength angle-sensing photodetectors inspired by directional hearing in small animals.

Sensing the direction of sounds gives animals clear evolutionary advantage. For large animals, with an ear-to-ear spacing that exceeds audible sound wavelengths, directional sensing is simply accomplished by recognizing the intensity and time differences of a wave impinging on its two ears1. Recent research suggests that in smaller, subwavelength animals, angle sensing can instead rely on a coherent coupling of soundwaves between the two ears2-4. Inspired by this natural design, here we show a subwarvelength photodetection pixel that can measure both the intensity and incident angle of light. It relies on an electrical isolation and optical coupling of two closely spaced Si nanowires that support optical Mie resonances5-7. When these resonators scatter light into the same free-space optical modes, a non-Hermitian coupling results that affords highly sensitive angle determination. By straightforward photocurrent measurements, we can independently quantify the stored optical energy in each nanowire and relate the difference in the stored energy between the wires to the incident angle of a light wave. We exploit this effect to fabricate a subwavelength angle-sensitive pixel with angular sensitivity, δθ = 0.32°.

Cold Vapor Generation beyond the Input Solar Energy Limit.

100% efficiency is the ultimate goal for all energy harvesting and conversion applications. However, no energy conversion process is reported to reach this ideal limit before. Here, an example with near perfect energy conversion efficiency in the process of solar vapor generation below room temperature is reported. Remarkably, when the operational temperature of the system is below that of the surroundings (i.e., under low density solar illumination), the total vapor generation rate is higher than the upper limit that can be produced by the input solar energy because of extra energy taken from the warmer environment. Experimental results are provided to validate this intriguing strategy under 1 sun illumination. The best measured rate is ≈2.20 kg m-2 h-1 under 1 sun illumination, well beyond its corresponding upper limit of 1.68 kg m-2 h-1 and is even faster than the one reported by other systems under 2 sun illumination.

Efficient and Layer-Dependent Exciton Pumping across Atomically Thin Organic-Inorganic Type-I Heterostructures.

The fundamental light-matter interactions in monolayer transition metal dichalcogenides might be significantly engineered by hybridization with their organic counterparts, enabling intriguing optoelectronic applications. Here, atomically thin organic-inorganic (O-I) heterostructures, comprising monolayer MoSe2 and mono-/few-layer single-crystal pentacene samples, are fabricated. These heterostructures show type-I band alignments, allowing efficient and layer-dependent exciton pumping across the O-I interfaces. The interfacial exciton pumping has much higher efficiency (>86 times) than the photoexcitation process in MoSe2 , although the pentacene layer has much lower optical absorption than MoSe2 . This highly enhanced pumping efficiency is attributed to the high quantum yield in pentacene and the ultrafast energy transfer between the O-I interface. Furthermore, those organic counterparts significantly modulate the bindings of charged excitons in monolayer MoSe2 via their precise dielectric environment engineering. The results open new avenues for exploring fundamental phenomena and novel optoelectronic applications using atomically thin O-I heterostructures.

Enhanced Performance of Ge Photodiodes via Monolithic Antireflection Texturing and α-Ge Self-Passivation by Inverse Metal-Assisted Chemical Etching.

Surface antireflection micro and nanostructures, normally formed by conventional reactive ion etching, offer advantages in photovoltaic and optoelectronic applications, including wider spectral wavelength ranges and acceptance angles. One challenge in incorporating these structures into devices is that optimal optical properties do not always translate into electrical performance due to surface damage, which significantly increases surface recombination. Here, we present a simple approach for fabricating antireflection structures, with self-passivated amorphous Ge (α-Ge) surfaces, on single crystalline Ge (c-Ge) surface using the inverse metal-assisted chemical etching technology (I-MacEtch). Vertical Schottky Ge photodiodes fabricated with surface structures involving arrays of pyramids or periodic nano-indentations show clear improvements not only in responsivity, due to enhanced optical absorption, but also in dark current. The dark current reduction is attributed to the Schottky barrier height increase and self-passivation effect of the i-MacEtch induced α-Ge layer formed on top of the c-Ge surface. The results demonstrated in this work show that MacEtch can be a viable technology for advanced light trapping and surface engineering in Ge and other semiconductor based optoelectronic devices.

Electromagnetic scattering laws in Weyl systems.

Wavelength determines the length scale of the cross section when electromagnetic waves are scattered by an electrically small object. The cross section diverges for resonant scattering, and diminishes for non-resonant scattering, when wavelength approaches infinity. This scattering law explains the colour of the sky as well as the strength of a mobile phone signal. We show that such wavelength scaling comes from the conical dispersion of free space at zero frequency. Emerging Weyl systems, offering similar dispersion at non-zero frequencies, lead to new laws of electromagnetic scattering that allow cross sections to be decoupled from the wavelength limit. Diverging and diminishing cross sections can be realized at any target wavelength in a Weyl system, providing the ability to tailor the strength of wave-matter interactions for radiofrequency and optical applications.

Tree-Inspired Design for High-Efficiency Water Extraction.

The solar steam process, akin to the natural water cycle, is considered to be an attractive approach to address water scarcity issues globally. However, water extraction from groundwater, for example, has not been demonstrated using these existing technologies. Additionally, there are major unaddressed challenges in extracting potable water from seawater including salt accumulation and long-term evaporation stability, which warrant further investigation. Herein, a high-performance solar steam device composed entirely of natural wood is reported. The pristine, natural wood is cut along the transverse direction and the top surface is carbonized to create a unique bilayer structure. This tree-inspired design offers distinct advantages for water extraction, including rapid water transport and evaporation in the mesoporous wood, high light absorption (≈99%) within the surface carbonized open wood channels, a low thermal conductivity to avoid thermal loss, and cost effectiveness. The device also exhibits long-term stability in seawater without salt accumulation as well as high performance for underground water extraction. The tree-inspired design offers an inexpensive and scalable solar energy harvesting and steam generation technology that can provide clean water globally, especially for rural or remote areas where water is not only scarce but also limited by water extraction materials and methods.

Silicon single-photon avalanche diodes with nano-structured light trapping.

Silicon single-photon avalanche detectors are becoming increasingly significant in research and in practical applications due to their high signal-to-noise ratio, complementary metal oxide semiconductor compatibility, room temperature operation, and cost-effectiveness. However, there is a trade-off in current silicon single-photon avalanche detectors, especially in the near infrared regime. Thick-junction devices have decent photon detection efficiency but poor timing jitter, while thin-junction devices have good timing jitter but poor efficiency. Here, we demonstrate a light-trapping, thin-junction Si single-photon avalanche diode that breaks this trade-off, by diffracting the incident photons into the horizontal waveguide mode, thus significantly increasing the absorption length. The photon detection efficiency has a 2.5-fold improvement in the near infrared regime, while the timing jitter remains 25 ps. The result provides a practical and complementary metal oxide semiconductor compatible method to improve the performance of single-photon avalanche detectors, image sensor arrays, and silicon photomultipliers over a broad spectral range.The performance of silicon single-photon avalanche detectors is currently limited by the trade-off between photon detection efficiency and timing jitter. Here, the authors demonstrate how a CMOS-compatible, nanostructured, thin junction structure can make use of tailored light trapping to break this trade-off.