RESUMO
<p><b>BACKGROUND</b>Spine surgery using computer-assisted navigation (CAN) has been proven to result in low screw misplacement rates, low incidence of radiation exposure and excellent operative field viewing versus the conventional intraoperative image intensifier (CIII). However, as we know, few previous studies have described the learning curve of CAN in spine surgery.</p><p><b>METHODS</b>We performed two consecutive case cohort studies on pedicel screw accuracy and operative time of two spine surgeons with different experience backgrounds, A and B, in one institution during the same period. Lumbar pedicel screw cortical perforation rate and operative time of the same kind of operation using CAN were analyzed and compared using CIII for the two surgeons at initial, 6 months and 12 months of CAN usage.</p><p><b>RESULTS</b>CAN spine surgery had an overall lower cortical perforation rate and less mean operative time compared with CIII for both surgeon A and B cohorts when total cases of four years were included. It missed being statistically significant, with 3.3% versus 4.7% (P = 0.191) and 125.7 versus 132.3 minutes (P = 0.428) for surgeon A and 3.6% versus 6.4% (P = 0.058), and 183.2 versus 213.2 minutes (P = 0.070) for surgeon B. In an attempt to demonstrate the learning curve, the cases after 6 months of the CAN system in each surgeon's cohort were compared. The perforation rate decreased by 2.4% (P = 0.039) and 4.3% (P = 0.003) and the operative time was reduced by 31.8 minutes (P = 0.002) and 14.4 minutes (P = 0.026) for the CAN groups of surgeons A and B, respectively. When only the cases performed after 12 months using the CAN system were considered, the perforation rate decreased by 3.9% (P = 0.006) and 5.6% (P < 0.001) and the operative time was reduced by 20.9 minutes (P < 0.001) and 40.3 minutes (P < 0.001) for the CAN groups of surgeon A and B, respectively.</p><p><b>CONCLUSIONS</b>In the long run, CAN spine surgery decreased the lumbar screw cortical perforation rate and operative time. The learning curve showed a sharp drop after 6 months of using CAN that plateaued after 12 months; which was demonstrated by both perforation rate and operative time data. Careful analysis of the data showed CAN is especially useful for less experienced surgeon to reduce perforation rate and intraoperative time, although further comparative studies are anticipated.</p>
Assuntos
Humanos , Estudos de Coortes , Coluna Vertebral , Cirurgia Geral , Cirurgia Assistida por Computador , MétodosRESUMO
<p><b>OBJECTIVE</b>To explore the therapeutical effects through investigating the results of multiple traumas treated by means of damage control surgery (DCS) or early total care (ETC).</p><p><b>METHODS</b>The clinical data of 90 patients with severe multiple traumas admitted from June 2001 to June 2007 were analyzed retrospectively. Forty-five patients were classified to the DCS group, 45 patients to the ETC group as a control. These severely injured patients were selected with an ISS > 25 points.</p><p><b>RESULTS</b>Between the two groups, the recovery time of clearance of lactic acid, body temperature, prothrombin time (PT) and activated partial thromboplastin time (APTT) of DCS group was significantly shorter than that of ETC group (P < 0.05). Incidence of complications and mortality in DCS group was significant less than that in ETC group (P < 0.05). No significant differences existed in the volume of bleeding and duration of surgery (P > 0.05).</p><p><b>CONCLUSIONS</b>The concept of DCS could reduce multiple traumas patients' mortality rate and incidence of complications. The indication of DCS should be the combination of physical feature, mechanism and severity of injuries.</p>
Assuntos
Feminino , Humanos , Masculino , Escala de Gravidade do Ferimento , Traumatismo Múltiplo , Terapêutica , Resultado do TratamentoRESUMO
<p><b>OBJECTIVE</b>To evaluate the efficacy of third generation spinal instrumentation such as TSRH, CD and ISOLA for the treatment of adult scoliosis.</p><p><b>METHODS</b>Thirty-five adult scoliosis patients including adult idiopathic and degenerative scoliosis were all surgically treated with third generation instrumentation such as TSRH, CD and ISOLA from July 1999 to January 2003. Preoperative mean cobb angles of major curves of the frontal plane was 58.1 degrees (42 degrees -95 degrees ). The patients received anterior combined with posterior correction or single posterior procedure. Mean follow-up was 20 months (10 - 48 months). Preoperative and postoperative Cobb angles of the frontal plane and sagittal plane and distance between C(7) and CVSL were measured. We assessed the subjective efficacy by questionnaire.</p><p><b>RESULTS</b>Clinical appearance of all patients improved significantly. Mean correction of major curves of the coronal plane was 53.2%. Mean lost of correction of the coronal plane in the last follow-up was 4.3 degrees , distance between the midline of C(7) and CVSL was corrected from 2.6 cm to 0.24 cm. Questionnaire in the follow-up showed that 89.3% patients were satisfied with operation results. Two cases occurred pneumatothorax and haematothorax. Three cases still complained about low back pain in 1 year after operation, among which 2 were adjacent degeneration and 1 was pseudarthrosis.</p><p><b>CONCLUSION</b>Imageology assessment and patients self-evaluation shows that the third generation instrumentation could gain good correction and trunk balance in the treatment for adult scoliosis. And patients are more satisfied and have less complications.</p>
Assuntos
Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Escoliose , Cirurgia Geral , Fusão Vertebral , Métodos , Resultado do TratamentoRESUMO
Objective: To evaluate the efficacy of the third-generation instrumentation including TSRH, CD and ISOLA in the treatment of adult scoliosis. Methods:Thirty-five adult patients with idiopathic or degenerative scoliosis who received treatment with third-generation instrumentation (TSRH,CD and ISOLA) between July 1999 to January 2003 were retrospectively reviewed. The mean preoperative cobb angle of major curves of the frontal plane was 58.1°(42°-95°). The patients received a combined anteroposterior approach or a single posterior procedure. The mean follow-up time was 20 months(10-48 months). Preoperative and postoperative Cobb angles of the frontal plane and sagittal plane and the distance between C7 and CVLS were measured. The subjective assessment was judged by questionnaire. Results: Postoperative clinical appearance of all patients improved significantly. Mean correction of major curves of the coronal plane was 53.2%. Mean loss of correction of the coronal plane in the last follow-up was 4.3°. The distance between the midline of C7 and CVSL was corrected from 2.6 cm to 0.24 cm. The results of follow-up showed that 89.3% patients were satisfied with the outcome. Pneumatothorax and haematothorax occurred in 2 patients. Three patients still complained of low back pain one year after operation because of adjacent degeneration in 2 patients and pseudoarthrosis in the remaining 1 patient. Conclusion: Imageologic findings and subjective assessment of the patients showed that the third-generation instrumentation can achieve good correction and trunk balance in the treatment of adult scoliosis with fewer complications.
RESUMO
Objective: To evaluate the efficacy of the third-generation instrumentation including TSRH, CD and ISOLA in the treatment of adult scoliosis. Methods:Thirty-five adult patients with idiopathic or degenerative scoliosis who received treatment with third-generation instrumentation (TSRH,CD and ISOLA) between July 1999 to January 2003 were retrospectively reviewed. The mean preoperative cobb angle of major curves of the frontal plane was 58.1°(42°-95°). The patients received a combined anteroposterior approach or a single posterior procedure. The mean follow-up time was 20 months(10-48 months). Preoperative and postoperative Cobb angles of the frontal plane and sagittal plane and the distance between C7 and CVLS were measured. The subjective assessment was judged by questionnaire. Results: Postoperative clinical appearance of all patients improved significantly. Mean correction of major curves of the coronal plane was 53.2%. Mean loss of correction of the coronal plane in the last follow-up was 4.3°. The distance between the midline of C7 and CVSL was corrected from 2.6 cm to 0.24 cm. The results of follow-up showed that 89.3% patients were satisfied with the outcome. Pneumatothorax and haematothorax occurred in 2 patients. Three patients still complained of low back pain one year after operation because of adjacent degeneration in 2 patients and pseudoarthrosis in the remaining 1 patient. Conclusion: Imageologic findings and subjective assessment of the patients showed that the third-generation instrumentation can achieve good correction and trunk balance in the treatment of adult scoliosis with fewer complications.