RESUMO
Currently, titanium and its alloys have emerged as the predominant metallic biomaterials for orthopedic implants. Nonetheless, the relatively high post-operative infection rate (2-5%) exacerbates patient discomfort and imposes significant economic costs on society. Hence, urgent measures are needed to enhance the antibacterial properties of titanium and titanium alloy implants. The titanium dioxide nanotube array (TNTA) is gaining increasing attention due to its topographical and photocatalytic antibacterial properties. Moreover, the pores within TNTA serve as excellent carriers for chemical ion doping and drug loading. The fabrication of TNTA on the surface of titanium and its alloys can be achieved through various methods. Studies have demonstrated that the electrochemical anodization method offers numerous significant advantages, such as simplicity, cost-effectiveness, and controllability. This review presents the development process of the electrochemical anodization method and its applications in synthesizing TNTA. Additionally, this article systematically discusses topographical, chemical, drug delivery, and combined antibacterial strategies. It is widely acknowledged that implants should possess a range of favorable biological characteristics. Clearly, addressing multiple needs with a single antibacterial strategy is challenging. Hence, this review proposes systematic research into combined antibacterial strategies to further mitigate post-operative infection risks and enhance implant success rates in the future.
RESUMO
As a new member of the 2D material family, MXene integrates high metallic conductivity and hydrophilic property simultaneously. It shows tremendous potential in fields of energy storage, sensing, electromagnetic shielding, and so forth. Due to the abundant surface functional groups, the physical and chemical properties of MXene can be tuned by the formation of MXene-polymer composites. The introduction of polymers can expand the interlayer spacing, reduce the distance of ion/electron transport, improve the surface hydrophilicity, and thus guide the assembly of MXene-polymer structures. Herein, the preparation strategies of MXene-polymer composites including physical mixing, surface modification, such as anchoring through TiN and Ti-O-C bonds, bonding through esterification, grafting functional groups through TiOSi/TiOP bonds, photograft reaction, as well as in situ polymerization are highlighted. In addition, the possible mechanisms for each strategy are explained. Furthermore, the applications of MXene-polymer composites obtained by different preparation strategies are summarized. Finally, perspectives and challenges are presented for the designs of MXene-polymer composites.
Assuntos
Polímeros , Titânio , Condutividade Elétrica , Interações Hidrofóbicas e Hidrofílicas , PolimerizaçãoRESUMO
In this study, we report a simple method to improve the thermal conductivity of epoxy resin by using new magnetic composites as fillers. The rGO@Fe3O4 nanocomposite has been prepared by a solvothermal method, and its morphology and chemical structure were characterized and analyzed by various characterization methods. Afterwards, the rGO@Fe3O4/EP composite material was obtained in an external magnetic field, in which the rGO@Fe3O4 is uniformly dispersed in the epoxy resin matrix, arranged along the direction of the magnetic field. In addition, the orientation of rGO@Fe3O4 increases with the magnetic field intensity. After doping 30% (wt) rGO@Fe3O4 into epoxy resin and curing under a 500 Gs magnetic field, the rGO@Fe3O4/EP composite material is anisotropic and has a higher thermal conductivity (increased by 196.60%) parallel to the direction of the magnetic field compared to a pure ring oxygen resin.
RESUMO
Graphene aerogels (GAs) were synthesized via a one-step hydrothermal method. Generally, the pore shape and diameter of GAs are difficult to control or the preparation process is complicated, requiring a multi-step operation. Herein, a soft-template one-step hydrothermal synthesis process was proposed to produce GAs with controllable pore sizes. Cyclohexane and n-butanol were added to a graphene oxide suspension to form a uniform aqueous dispersion under emulsification by sodium lauryl sulfate. The reduction process may have occurred around the organic droplets during the hydrothermal reaction, and a large number of organic droplets became countless physical barriers inside the hydrogel. In the later freeze-drying and high-temperature calcination procedures, the droplets evaporated to form a rich pore structure. Compared to the conventional templating method, the organic template was volatilized during the drying process such that no additional process for removing the template was required. In addition, GAs prepared by the template method possessed lower density (2.66 mg cm-3) and better compression performance and, as an adsorbent material, absorbed organic matter and petroleum from wastewater more efficiently than GAs obtained by the traditional one-step hydrothermal method; Q for n-hexane reached 116, and Q for xylene reached 147; also, the GAs prepared by the soft template method can absorb all crude oil in water samples within 30 s.