Latest Advances in Chondrocyte-Based Cartilage Repair.

Chondrocyte-based cell therapy has been used for more than 30 years and is still considered to be a promising method of cartilage repair despite some limitations. This review introduces the latest developments of four generations of autologous chondrocyte implantation and current autologous chondrocyte products. The regeneration of cartilage from adult chondrocytes is limited by culture-induced dedifferentiation and patient age. Cartibeads is an innovative three-step method to produce high-quality hyaline cartilage microtissues, and it is developed from adult dedifferentiated chondrocytes with a high number of cell passages. In addition, allogeneic chondrocyte therapies using the Quantum hollow-fiber bioreactor and several signaling pathways involved in chondrocyte-based cartilage repair are mentioned, such as WNT signaling, the BMP-2/WISP1 pathway, and the FGF19 pathway.

Systematic proteomics analysis revealed different expression of laminin interaction proteins in breast cancer: lower in luminal subtype and higher in claudin-low subtype.

Background: Breast cancer is a major public health concern. Proteomics enables identification of proteins with aberrant properties. Here, we identified proteins with abnormal expression levels in breast cancer tissues and systematically analyzed and validated the data to locate potential diagnostic and therapeutic targets. Methods: Protein expression level in breast cancer tissues and para-carcinoma tissues were detected by Isobaric Tags for Relative and Absolute Quantification (iTRAQ) technology and further screened through Gene Expression Profiling Interactive Analysis (GEPIA) database. Cellular components, protein domain and Reactome pathway analysis were performed to screen functional targets. Abnormal expression levels of functional targets were validated by Oncomine database, quantitative real time polymerase chain reaction (qRT-PCR) and proteomics detection. Protein correlation analysis was performed to explain the abnormal expression levels of potential targets in breast cancer. Results: Overall, 207 and 207 proteins were up- and down-regulated, respectively, in breast cancer tissues, and approximately 50% were also detected in the GEPIA database. The overlapping proteins were mainly extracellular proteins containing epidermal growth factor-like domain in leukocyte adhesion molecule (EGF-Lam) domain and enriched in laminin interaction pathway. Moreover, the downregulated laminin interaction proteins could be functional targets, which were also validated through Oncomine-Richardson and Oncomine-Curtis database. However, the lower expression level of laminin interaction proteins only fit for luminal breast cancer cells with no or low metastasis ability because the proteins achieved higher expression level in more invasive claudin-low breast cancer cells. In addition, when compared with corresponding in situ carcinoma tissues, above-mentioned proteins also showed higher expression levels in invasive carcinoma tissues. Finally, we have revealed the negative correlation between the laminin interaction proteins and the claudins. Conclusions: The laminin interaction protein, especially for laminins with ß1 and γ1 subunits and their integrin receptors with α1 and α6 subunits, showed lower expression levels in luminal breast cancer with no or lower metastatic ability, but showed higher expression levels in claudin-low breast cancer with higher metastatic ability; and their higher expression could be related to the low claudin expression.

Career Considerations in Nurse-Led Traditional Chinese Medicine Clinics: a Two-Center Qualitative Study.

Background: Growing demand exists for high-quality Traditional Chinese Medicine (TCM) care, particularly through Nurse-led TCM clinics (TCM-NLCs). Nurses with extensive experience in TCM departments represent a potential workforce for this healthcare model. This qualitative study aims to investigate the willingness of these candidates to engage in TCM-NLCs, with a specific focus on their main concerns and apprehensions when facing new challenges. Methods: Individual semi-structured face to face interviews were conducted with senior nurses from two TCM hospitals in Shanghai. Each participant had a minimum of three years of work experience in a TCM related department. Conventional qualitative content analysis was utilized. Results: Fourteen participants were interviewed and data saturation was achieved. Nurses exhibited strong interest in practicing in TCM-NLCs. They believed that such innovative TCM nursing service model not only extends nursing role, provides greater empowerment and opportunities for professional development but also meets patients' diverse healthcare needs, reduces reliance on other healthcare providers such as doctors, and increases hospital revenue. However, challenges such as deficiencies in evidence-based TCM nursing education, the absence of standardized practice guidelines, and limited prescriptive privileges were identified as primary obstacles to engaging in TCM-NLCs practice, potentially undermining the specialization of this advanced nursing practice model. Conclusion: Although the nurses interviewed were highly motivated, they generally lacked confidence to practice independently in TCM-NLCs. A pressing priority is to address their concerns by providing appropriate resources as well as education and policy support to enhance their competency and ensure their practice autonomy, therefore building a more qualified pool of professionals for advanced TCM nursing practice.

Sensitive and on-Site Detection of Staphylococcus aureus Based on CRISPR/Cas 13a-Assisted Chemiluminescence Resonance Energy Transfer.

Developing a specific, sensitive, rapid, and on-site method for detecting pathogenic bacteria in food samples is critical to ensuring public safety. This article demonstrates a CRISPR/Cas13a system and a chemiluminescence resonance energy transfer (CRET) (CRISPR/Cas 13a-assisted CRET)-based strategy for sensitive and on-site detection of pathogenic bacteria in real samples. Once the hybrid double strand of aptamerS. aureus-cRNA recognizes the target model bacteria of Staphylococcus aureus (S. aureus), the released cRNA would bind with CRISPR/Cas 13a to form a complex of cRNA-CRISPR/Cas 13a, which could cleave the RNA molecule in the detecting probe of horseradish peroxidase (HRP) modified-gold nanoparticles (AuNPs) linked by RNA (AuNPs-RNA-HRP), resulting in an enhanced chemiluminescence signal due to the CRET "OFF" phenomenon after introducing the chemiluminescence substrate of luminol. The CRISPR/Cas 13a-assisted CRET strategy successfully detected S. aureus in drinking water and milk with detection limits of 20 and 30 cfu/mL, respectively, within the recovery of 90.07-105.50%. Furthermore, after integrating with an immunochromatographic test strip (ICTS), the CRISPR/Cas 13a-assisted CRET strategy achieved the on-site detection of as low as 102 cfu/mL of S. aureus in drinking water and milk via a smartphone, which is about 10 times lower than that in the previously reported AuNPs-based colorimetric ICTS, demonstrating a convenient and sensitive detection method for S. aureus in real samples.

Superimposing digital arch scans onto cone beam computed tomography scans with metallic artifacts by applying a radiopaque occlusal registration material: A chairside dental technique.

Precise alignment between digital arch scans and cone beam computed tomography (CBCT) scans is a crucial step in computer-aided implant planning and placement. However, clinicians frequently encounter challenges during this process when imaging patients with existing metal restorations or orthodontic devices, as these can introduce metallic artifacts on CBCT scans that lead to alignment deviations. The presented technique describes a straightforward approach using a radiopaque occlusal registration material as a radiographic marker to facilitate the alignment between digital arch scans and CBCT scans with metallic artifacts. This technique simplifies the clinical workflow by eliminating the need for additional radiographic templates or specialized devices, offering a cost-effective option for clinicians.

Sagittal balance parameters measurement on cervical spine MR images based on superpixel segmentation.

Introduction: Magnetic Resonance Imaging (MRI) is essential in diagnosing cervical spondylosis, providing detailed visualization of osseous and soft tissue structures in the cervical spine. However, manual measurements hinder the assessment of cervical spine sagittal balance, leading to time-consuming and error-prone processes. This study presents the Pyramid DBSCAN Simple Linear Iterative Cluster (PDB-SLIC), an automated segmentation algorithm for vertebral bodies in T2-weighted MR images, aiming to streamline sagittal balance assessment for spinal surgeons. Method: PDB-SLIC combines the SLIC superpixel segmentation algorithm with DBSCAN clustering and underwent rigorous testing using an extensive dataset of T2-weighted mid-sagittal MR images from 4,258 patients across ten hospitals in China. The efficacy of PDB-SLIC was compared against other algorithms and networks in terms of superpixel segmentation quality and vertebral body segmentation accuracy. Validation included a comparative analysis of manual and automated measurements of cervical sagittal parameters and scrutiny of PDB-SLIC's measurement stability across diverse hospital settings and MR scanning machines. Result: PDB-SLIC outperforms other algorithms in vertebral body segmentation quality, with high accuracy, recall, and Jaccard index. Minimal error deviation was observed compared to manual measurements, with correlation coefficients exceeding 95%. PDB-SLIC demonstrated commendable performance in processing cervical spine T2-weighted MR images from various hospital settings, MRI machines, and patient demographics. Discussion: The PDB-SLIC algorithm emerges as an accurate, objective, and efficient tool for evaluating cervical spine sagittal balance, providing valuable assistance to spinal surgeons in preoperative assessment, surgical strategy formulation, and prognostic inference. Additionally, it facilitates comprehensive measurement of sagittal balance parameters across diverse patient cohorts, contributing to the establishment of normative standards for cervical spine MR imaging.

Trueness evaluation of three intraoral scanners for the recording of maximal intercuspal position.

OBJECTIVES: This clinical study aimed to assess the trueness of three intraoral scanners for the recor-ding of the maximal intercuspal position (MIP) to provide a reference for clinical practice. METHODS: Ten participants with good occlusal relationship and healthy temporomandibular joint were recruited. For the control group, facebow transferring procedures were performed, and bite registrations at the MIP were used to transfer maxillary and mandibular casts to a mechanical articulator, which were then scanned with a laboratory scanner to obtain digital cast data. For the experimental groups, three intraoral scanners (Trios 3, Carestream 3600, and Aoralscan 3) were used to obtain digital casts of the participants at the MIP following the scanning workflows endorsed by the corresponding manufacturers. Subsequently, measurement points were marked on the control group's digital casts at the central incisors, canines, and first molars, and corresponding distances between these points on the maxillary and mandibular casts were measured to calculate the sum of measured distances (DA). Distances between measurement points in the incisor (DI), canine (DC), and first molar (DM) regions were also calculated. The control group's maxillary and mandibular digital casts with the added measurement points were aligned with the experimental group's casts, and DA, DI, DC, and DM values of the aligned control casts were determined. Statistical analysis was performed on DA, DI, DC, and DM obtained from both the control and experimental groups to evaluate the trueness of the three intraoral scanners for the recording of MIP. RESULTS: In the control group, DA, DI, DC, and DM values were (39.58±6.40), (13.64±3.58), (14.91±2.85), and (11.03±1.56) mm. The Trios 3 group had values of (38.99±6.60), (13.42±3.66), (14.55±2.87), and (11.03±1.69) mm. The Carestream 3600 group showed values of (38.57±6.36), (13.56±3.68), (14.45±2.85), and (10.55±1.41) mm, while the Aoralscan 3 group had values of (38.16±5.69), (13.03±3.54), (14.23±2.59), and (10.90±1.54) mm. Analysis of variance revealed no statistically significant differences between the experimental and control groups for overall deviation DA (P=0.96), as well as local deviations DI (P=0.98), DC (P=0.96), and DM (P=0.89). CONCLUSIONS: With standardized scanning protocols, the three intraoral scanners demonstrated comparable trueness to traditional methods in recording MIP, fulfilling clinical requirements.

Digital cross-mounting of intraoral scan casts from a virtual articulator to a mechanical articulator by using a custom transfer plate: A dental technique.

With the development of digital dental technologies, a complete digital workflow without using physical casts has become possible. However, for certain clinical and dental laboratory procedures, especially in complex rehabilitation treatments, physically mounted casts in an ideal location in a mechanical articulator are still necessary for treatment planning and restoration fabrication. This technique report describes a digital approach to fabricating a custom transfer plate to cross mount intraoral scan casts from a virtual articulator to the corresponding mechanical articulator. This technique eliminates the need for conventional physical facebow transfer processes and offers a straightforward approach to integrating virtual procedures with analog workflows.

An investigation into the present status and influencing factors of nurse retention in grade-a tertiary general hospitals in Shanxi Province within the framework of the magnet hospital concept.

BACKGROUND: The attrition of nursing staff significantly contributes to the shortage of healthcare professionals. This study entailed an examination of the propensity of nurses to sustain employment within Grade-A tertiary general hospitals and the various influencing factors. METHODS: A total of 2,457 nurses from three grade-A tertiary general hospitals were surveyed. The survey instruments included a general information questionnaire, a scale measuring their willingness to continue working, and a Chinese version of the Magnet Hospital Factor scale. RESULTS: The scores of the willingness to continue working scale and the Magnet Hospital Factor scale were 21.53 ± 4.52 and 145.46 ± 25.82, respectively. There were statistically significant differences in the scores of willingness of nurses to continue working across various factors, including the department, age, marital status, family location, length of service as nurses, professional title, position, and employment type, upon comparison (P < 0.001). The correlation analysis showed that there was a positive correlation between the willingness of nurses to continue working and the magnet hospital factors, with a correlation coefficient of 0.523 (P < 0.01). Regression analysis showed that department, length of service as nurses, professional title, position, average monthly income, number of night shifts, medical care relationship, educational support, and nursing manager support among the magnet hospital factors were important predictors of willingness to continue working (P < 0.001). CONCLUSION: The willingness of nurses to continue working in grade-A tertiary general hospitals in Shanxi Province was determined to be at an upper-middle level. The magnet status of grade-A tertiary general hospitals needs to be improved, and there are many factors that influenced willingness of nurses to continue working. To cultivate a more favorable environment and bolster nurse recruitment and retention, all healthcare institutions should strive to establish a magnet nursing environment, thereby fostering the robust development of the nursing team.

[Urinary protein and renal pathological features in children with immunoglobulin A vasculitis with nephritis and hypercoagulability]. / 儿童IgAè¡€ç®¡ç‚Žè‚¾ç‚Žä¼´é«˜å‡çŠ¶æ€çš„å°¿è›‹ç™½å’Œè‚¾è„ç— ç†ç‰¹å¾åˆ†æž.

OBJECTIVES: To study the association of hypercoagulability with urinary protein and renal pathological damage in children with immunoglobulin A vasculitis with nephritis (IgAVN). METHODS: Based on the results of coagulation function, 349 children with IgAVN were divided into a hypercoagulability group consisting of 52 children and a non-hypercoagulability group consisting of 297 children. Urinary protein and renal pathological features were compared between the two groups, and the factors influencing the formation of hypercoagulability in children with IgAVN were analyzed. RESULTS: Compared with the non-hypercoagulability group, the hypercoagulability group had significantly higher levels of urinary erythrocyte count, 24-hour urinary protein, urinary protein/creatinine, urinary immunoglobulin G/creatinine, and urinary N-acetyl-ß-D-glucosaminidase (P<0.05). The hypercoagulability group also had a significantly higher proportion of children with a renal pathological grade of III-IV, diffuse mesangial proliferation, capillary endothelial cell proliferation, or >25% crescent formation (P<0.05). The multivariate logistic regression analysis showed that capillary endothelial cell proliferation and glomerular crescent formation >25% were associated with the formation of hypercoagulability in children with IgAVN (P<0.05). CONCLUSIONS: The renal injury in IgAVN children with hypercoagulability is more severe, with greater than 25% crescent formation and increased proliferation of glomerular endothelial cells being important contributing factors that exacerbate the hypercoagulable state in IgAVN.

Design, Synthesis, and Biological Activity of Novel Phenyltriazolinone PPO Inhibitors Containing Five-Membered Heterocycles.

Protoporphyrinogen oxidase (PPO, EC 1.3.3.4) catalyzes the oxidation of protoporphyrinogen IX to protoporphyrin IX, which is a key step in the synthesis of porphyrins in vivo. PPO inhibitors use protoporphyrinogen oxidase as the target and block the biosynthesis process of porphyrin by inhibiting the activity of the enzyme, eventually leading to plant death. In this paper, phenyl triazolinone was used as the parent structure, and the five-membered heterocycle with good herbicidal activity was introduced by using the principle of substructure splicing. According to the principle of bioisosterism, the sulfur atoms on the thiophene ring were replaced with oxygen atoms. Finally, 33 phenyl triazolinones and their derivatives were designed and synthesized, and their characterizations and biological activities were investigated. The in vitro PPO inhibitory activity and greenhouse herbicidal activity of 33 target compounds were determined, and compound D4 with better activity was screened out. The crop safety determination, field weeding effect determination, weeding spectrum determination, and crop metabolism study were carried out. The results showed that compound D4 showed good safety to corn, soybean, wheat, and peanut but poor selectivity to cotton. The field weeding effect of this compound is comparable to that of the commercial herbicide sulfentrazone. The herbicidal spectrum experiment showed that compound D4 had a wide herbicidal spectrum and a good growth inhibition effect on dicotyledonous weeds. Molecular docking results showed that compound D4 forms a hydrogen bond with amino acid residue Arg-98 in the tobacco mitochondria (mtPPO)-active pocket and forms two π-π stacking interactions with Phe-392. This indicates that compound D4 has stronger PPO inhibitory activity. This indicates that compound D4 has wide prospects for development.

A novel isophorone-based NIR fluorescent and colormetric probe for Al3+ sensing and its application for living cells and plants imaging.

In this paper, an isophorone-based NIR fluorescent and colormetric probe BDDH for Al3+ was synthesized and characterized, it showed highly selectivity and sensitivity through significant fluorescence enhancement and visible color change towards Al3+. The job plot confirmed that the binding ratio of BDDH with Al3+ was 1:1. Furthermore, the limit of detection (LOD) of Al3+ was determined to be 4.01 × 10-8 M. Moreover, BDDH was successfully applicated in identification of Al3+ in the different water samples, cell imaging in alive MCF-7 cells and plant imaging in soybean roots.

Sedimentary characteristics of ion-adsorption rare earth elements and assessment of their resource reuse potential due to soil and water erosion in western Fujian.

With severe soil and water erosion, the crucial ion-adsorption rare earth elements (REEs) have attracted much global attention. REEs play a vital role in tracing material sources and exploring sedimentary characteristics due to their unique and stable geochemistry properties. In the present work, three representational possible redeposition areas in western Fujian were selected as the study areas. The geochemical characteristics of REEs in the sediments of the study areas were evaluated to elucidate that REEs are the products of soil and water erosion and to assess their redeposition characteristics. In the research results, the properties of the parent rocks shown in the samples, together with the negative correlation between the content of REEs in the samples and altitude as well as the relief degree on the land surface (RDLS), fully indicate that the sediments in the study areas are the products of migration caused by soil erosion and redeposition in the downstream areas. At the same time, according to the widely applicable standard of rare earth resources exploitation, that is the boundary grade of ion-adsorption rare earth ore in southern China (∑REE = 500 mg·kg-1), we found that the content of REEs in the study areas was close to or exceeded this standard, and the maximum ∑REE of Guozhai Reservoir (869.11 mg·kg-1) was much larger than this standard. Therefore, the redeposited rare earth in Changting Country has high reuse potential under the current scarce resources.

Evaluation of the accuracy of a fully digital method of measuring sagittal condylar inclination.

OBJECTIVES: This clinical study aimed to evaluate the accuracy of a fully digital technique for measuring sagittal condylar inclination (SCI), as well as validating whether differences existed between the left and right SCI values of the same participant, to provide a reference for clinical practice. METHODS: Ten participants with good occlusal relationship and normal temporomandibular joint were recruited. Three methods were used to measure the SCI values of the participants, namely, A (mechanical facebow transferring and mechanical articulator-based measuring method with physical protrusive interocclusal registration), B (face scan-based virtual facebow and virtual articulator-based measuring method with digital protrusive interocclusal registration), and C (jaw motion tracking system-based measuring method). With the group subjected to methods A and C as the control, the SCI values obtained by the three methods were statistically analyzed. The left and right SCI values of the same participant were also compared. RESULTS: The left and right SCI values measured by method A were 41.70°±7.09° and 42.80°±8.62°, those by method B were 35.09°±12.49° and 37.63°±12.10°, and those by method C were 39.43°±8.72° and 38.45°±6.91°. No significant difference existed among the SCI values measured by the three methods (P>0.05). Meanwhile, no statistical difference existed between the SCI values on the left and right sides of the same participant (P>0.05). CONCLUSIONS: The accuracy of the virtual facebow and digital protrusive occlusal registration based SCI measuring method was the same as that of mechanical facebow based and jaw motion tracking system-based methods. The SCI values on the left and right sides of the same participant were similar. Clinically, an appropriate SCI measurement and setting strategy can be selected based on the actual situations.

Dynamical interplay between superconductivity and pseudogap in cuprates as revealed by terahertz third-harmonic generation spectroscopy.

We report on nonlinear terahertz third-harmonic generation (THG) measurements on YBa2Cu3O6+x thin films. Different from conventional superconductors, the THG signal starts to appear in the normal state, which is consistent with the crossover temperature T* of pseudogap over broad doping levels. Upon lowering the temperature, the THG signal shows an anomaly just below Tc in the optimally doped sample. Notably, we observe a beat pattern directly in the measured real-time waveform of the THG signal. We elaborate that the Higgs mode, which develops below Tc, couples to the mode already developed below T*, resulting in an energy level splitting. However, this coupling effect is not evident in underdoped samples. We explore different potential explanations for the observed phenomena. Our research offers valuable insight into the interplay between superconductivity and pseudogap.

A digital approach to fabricating a custom holder for the attachment of a mandibular sensor of an optical jaw motion tracking system: A dental technique.

A digital approach to fabricating a custom holder to attach a mandibular sensor of an optical jaw motion tracking system is described. Typically, jaw motion tracking systems come with standard holders. However, additional chairside time is still required to adapt the holder's arm to the individual arch and securely attach the holder to the mandibular teeth. Moreover, the placement of the standard holder is problematic in patients with a deep vertical overlap or with short clinical crowns. This technique offers a digital approach to designing and fabricating a custom holder in situations where standard holders cannot be efficiently attached. The custom holder is designed to accommodate the available space without interfering with the occlusion, thereby minimizing the time needed to attach the holder and optimizing the workflow for clinical jaw motion tracking.

Acupuncture for primary insomnia: Effectiveness, safety, mechanisms and recommendations for clinical practice.

Primary insomnia (PI) is an increasing concern in modern society. Cognitive-behavioral therapy for insomnia is the first-line recommendation, yet limited availability and cost impede its widespread use. While hypnotics are frequently used, balancing their benefits against the risk of adverse events poses challenges. This review summarizes the clinical and preclinical evidence of acupuncture as a treatment for PI, discussing its potential mechanisms and role in reliving insomnia. Clinical trials show that acupuncture improves subjective sleep quality, fatigue, cognitive impairments, and emotional symptoms with minimal adverse events. It also positively impacts objective sleep processes, including prolonging total sleep time, improving sleep efficiency, reducing sleep onset latency and wake after sleep onset, and enhancing sleep architecture/structure, including increasing N3% and REM%, and decreasing N1%. However, methodological shortcomings in some trials diminish the overall quality of evidence. Animal studies suggest that acupuncture restores circadian rhythms in sleep-deprived rodents and improves their performance in behavioral tests, possibly mediated by various clinical variables and pathways. These may involve neurotransmitters, brain-derived neurotrophic factors, inflammatory cytokines, the hypothalamic-pituitary-adrenal axis, gut microbiota, and other cellular events. While the existing findings support acupuncture as a promising therapeutic strategy for PI, additional high-quality trials are required to validate its benefits.

Novel antibacterial drug target against Gram-negative bacteria: lipopolysaccharide transport protein LptDE and its inhibitors / 药学学报

The outer membrane composed predominantly of lipopolysaccharide (LPS) is an essential biological barrier for most Gram-negative (G-) bacteria. Lipopolysaccharide transport protein (Lpt) complex LptDE is responsible for the critical final stage of LPS transport and outer membrane assembly. The structure and function of LptDE are highly conserved in most G- bacteria but absent in mammalian cells, and thus LptDE complex is regarded as an attractive antibacterial target. In recent 10 years, the deciphering of the three-dimensional structure of LptDE protein facilities the drug discovery based on such "non-enzyme" proteins. Murepavadin, a peptidomimetic compound, was reported to be the first compound able to target LptD, enlightening a new class of antibacterial molecules with novel mechanisms of action. This article is devoted to summarize the molecular characteristics, structure-function of LptDE protein complex and review the development of murepavadin and related peptidomimetic compounds, in order to provide references for relevant researches.

Association between exposure to multiple metals and lung function in welders by multi-pollutant statistical models / 环境与职业医学

Background Welders' exposure to welding fumes with multiple metals leads to decreased pulmonary function. Previous studies have focused on single metal exposure, while giving little attention to the impact of metal mixtures. Objective To assess the association between metal levels in urine and blood of welders and pulmonary function indicators, and to identify key metals for occupational health risk assessment. Methods Questionnaire surveys, lung function tests, urine and blood sampling were conducted among welders and control workers in a shipyard in Shanghai. Inductively coupled plasma mass spectrometry (ICP-MS) was used to detect the concentrations of 12 metals such as vanadium, chromium, and manganese in urine and blood. Spearman correlation was applied to analyze the correlations between the metals in urine and blood. Multiple linear regression, weighted quantile sum (WQS) and Bayesian kernel machine regression (BKMR) were used to analyze the relationships between mixed metal exposure and pulmonary function parameters, such as forced vital capacity (FVC), forced vital capacity as a percentage of predicted value (FVC%), forced expiratory volume in the first second (FEV1), forced expiratory volume in the first second as a percentage of predicted value (FEV1%), and forced expiratory volume in the first second/forced vital capacity (FEV1/FVC). Results This study enrolled 445 subjects, including 322 welders (72.36%) and 123 controls (27.64%). The mean age of the 445 participants was (37.64±8.80) years, and 87.19% participants were male. The welders had significantly higher levels of urinary cadmium (0.88 vs 0.58 μg·L−1), blood chromium (5.86 vs 5.06 μg·L−1), and blood manganese (24.24 vs 21.38 μg·L−1) than the controls (P<0.05). The Spearman correlation coefficients between the metals in urine and blood ranged from −0.46 to 0.68. After adjustment for confounders, the multiple linear regression indicted that the urine molybdenum of the welders was negatively correlated with FVC and FEV1. There were also negative correlations between the molybdenum in blood and FVC, FVC%, FEV1, and FEV1%, and between the copper in blood and FEV1/FVC. The WQS model showed that FEV1 and FVC decreased by 0.112 L and 0.353 L with each quartile increase of metal mixture concentrations in urine and blood among the welders respectively, and the leading contributors were copper, zinc, vanadium, and antimony. The BKMR model showed a negative overall effect of metal mixtures in urine and blood among the welders on FVC, FVC%, FEV1, and FEV1%, and the univariate exposure response-relationship between the molybdenum concentration in urine or blood and FVC, FVC%, FEV1, or FEV1% had an approximately linear decreasing trend. Meanwhile, there may be an interaction of cadmium with manganese, nickel, or vanadium, and an interaction of vanadium with iron, molybdenum, zinc, or copper, when different metals in urine among the welders interacted with FEV1%. Conclusion Exposure to multiple metals in welders leads to a decline in lung function, with molybdenum, antimony, copper, and zinc as the leading contributors.