Preparation and Characterization of Newly Discovered Fibrous Aggregates of Single-Walled Carbon Nanohorns.

Fibrous aggregates composed of radially assembled graphene-based single-walled nanotubules are prepared, named here as fibrous aggregates of single-walled carbon nanohorns (fib-CNHs), whose structure resembles that of chenille stems. The newly discovered fib-CNHs are 30-100 nm in diameter and 1-10 µm in length. The fib-CNHs show high dispersibility and conductivity. The fib-CNHs increase the advantages of nanocarbons in various fields.

Preparation of small-sized graphene oxide sheets and their biological applications.

By using carbon nanohorns as starting materials, small- and uniform-sized graphene oxide (S-GO) sheets can be prepared in high yields via an oxidation method. The obtained S-GO sheets have a band-like structure with a length of 20-50 nm, a width of 2-10 nm, and a thickness of 0.5-5 nm. S-GO sheets are hydrophilic due to abundant oxygenated groups on the surfaces and edges; hence, this nanomaterial is highly dispersive in aqueous solutions and some hydrophilic organic solvents. Additionally, like other S-GO samples, the S-GO sheets prepared here are strongly fluorescent over the visible light wavelength region. These characteristics underscore the high potential of S-GO sheets for nanomedical and diagnostic applications. In proof-of-concept experiments, the S-GO sheets were conjugated with an arginine-glycine-aspartic acid derivative for tumour-targeting drug delivery applications, and with an immunoglobulin G antibody for immunoassay applications.

Not nanocarbon but dispersant induced abnormality in lysosome in macrophages in vivo.

The properties of nanocarbons change from hydrophobic to hydrophilic as a result of coating them with dispersants, typically phospholipid polyethylene glycols, for biological studies. It has been shown that the dispersants remain attached to the nanocarbons when they are injected in mice and influence the nanocarbons' biodistribution in vivo. We show in this report that the effects of dispersants also appear at the subcellular level in vivo. Carbon nanohorns (CNHs), a type of nanocarbon, were dispersed with ceramide polyethylene glycol (CPEG) and intravenously injected in mice. Histological observations and electron microscopy with energy dispersive x-ray analysis revealed that, in liver and spleen, the lysosome membranes were damaged, and the nanohorns formed a complex with hemosiderin in the lysosomes of the macrophages. It is inferred that the lysosomal membrane was damaged by sphigosine generated as a result of CPEG decomposition, which changed the intra lysosomal conditions, inducing the formation of the CPEG-CNH and hemosiderin complex. For comparison, when glucose was used instead of CPEG, neither the nanohorn­hemosiderin complex nor lysosomal membrane damage was found. Our results suggest that surface functionalization can control the behavior of nancarbons in cells in vivo and thereby improve their suitability for medical applications.

Ultrastructural localization of intravenously injected carbon nanohorns in tumor.

Nanocarbons have many potential medical applications. Drug delivery, diagnostic imaging, and photohyperthermia therapy, especially in the treatment of tumors, have attracted interest. For the further advancement of these application studies, the microscopic localization of nanocarbons in tumor tissues and cells is a prerequisite. In this study, carbon nanohorns (CNHs) with sizes of about 100 nm were intravenously injected into mice having subcutaneously transplanted tumors, and the CNHs in tumor tissue were observed with optical and electron microscopy. In the tumor tissue, the CNHs were found in macrophages and endothelial cells within the blood vessels. Few CNHs were found in tumor cells or in the region away from blood vessels, suggesting that, under these study conditions, the enhanced permeability of tumor blood vessels was not effective for the movement of CNHs through the vessel walls. The CNHs in normal skin tissue were similarly observed. The extravasation of CNHs was not so obvious in tumor but was easily found in normal skin, which was probably due to their vessel wall structure difference. Proper understanding of the location of CNHs in tissues is helpful in the development of the medical uses of CNHs.

Carboxylation of thin graphitic sheets is faster than that of carbon nanohorns.

Globular aggregates of carbon nanohorns (CNHs) often contain graphite-like thin sheets (GLSs), and providing different functions to CNHs and GLSs would expand the possible applications of the CNH-GLS aggregates. We show that the GLS edges can be carboxylated selectively by immersing the aggregates in an aqueous solution of H2O2 at room temperature for 1 hour. The presence of carboxyl groups was confirmed by temperature-programmed desorption mass spectroscopy measurements, and their amounts were evaluated using thermogravimetric analysis. The preferential carboxylation of GLSs at their edges was evidenced, after the carboxyl groups were reacted with Pt-ammine complexes, by electron microscopic observation of the Pt atoms at the GLS edges. Since few holes in CNH walls were opened by the short-period H2O2 treatment, there was little carboxylation of CNHs.

A high poly(ethylene glycol) density on graphene nanomaterials reduces the detachment of lipid-poly(ethylene glycol) and macrophage uptake.

Amphiphilic lipid-poly(ethylene glycol) (LPEG) is widely used for the noncovalent functionalization of graphene nanomaterials (GNMs) to improve their dispersion in aqueous solutions for biomedical applications. However, not much is known about the detachment of LPEGs from GNMs and macrophage uptake of dispersed GNMs in relation to the alkyl chain coverage, the PEG coverage, and the linker group in LPEGs. In this study we examined these relationships using single walled carbon nanohorns (SWCNHs). The high coverage of PEG rather than that of alkyl chains was dominant in suppressing the detachment of LPEGs from SWCNHs in protein-containing physiological solution. Correspondingly, the quantity of LPEG-covered SWCNHs (LPEG-SWCNHs) taken up by macrophages decreased at a high PEG coverage. Our study also demonstrated an effect of the ionic group in LPEG on SWCNH uptake into macrophages. A phosphate anionic group in the LPEG induced lower alkyl chain coverage and easy detachment of the LPEG, however, the negative surface charge of LPEG-SWCNHs reduced the uptake of SWCNHs by macrophages.

Highly efficient field emission from carbon nanotube-nanohorn hybrids prepared by chemical vapor deposition.

Electrically conductive carbon nanotubes (CNTs) with high aspect ratios emit electrons at low electric fields, thus applications to large-area field emission (FE) devices with CNT cathodes are attractive to save energy consumption. However, the poor dispersion and easy bundling properties of CNTs in solvents have hindered this progress. We have solved these problems by growing single-walled CNTs (SWNTs) on single-walled carbon nanohorn (SWNH) aggregates that have spherical forms with ca. 100-nm diameters. In the obtained SWNT-SWNH hybrids (NTNHs), the SWNTs diameters were 1-1.7 nm and the bundle diameters became almost uniform, that is, less than 10 nm, since the SWNTs were separated by SWNH aggregates. We also confirmed that a large-area FE device with NTNH cathodes made by screen printing was highly and homogeneously bright, suggesting the success of the hybrid strategy.

Biodistribution and ultrastructural localization of single-walled carbon nanohorns determined in vivo with embedded Gd2O3 labels.

Single-walled carbon nanohorns (SWNHs) are single-graphene tubules that have shown high potential for drug delivery systems. In drug delivery, it is essential to quantitatively determine biodistribution and ultrastructural localization. However, to date, these determinations have not been successfully achieved. In this report, we describe for the first time a method that can achieve these determinations. We embedded Gd(2)O(3) nanoparticles within SWNH aggregates (Gd(2)O(3)@SWNHag) to facilitate detection and quantification. Gd(2)O(3)@SWNHag was intravenously injected into mice, and the quantities of Gd in the internal organs were measured by inductively coupled plasma atomic emission spectroscopy: 70-80% of the total injected material accumulated in liver. The high electron scattering ability of Gd allows detection with energy dispersive X-ray spectroscopy and facilitates the ultrastructural localization of individual Gd(2)O(3)@SWNHag with transmission electron microscopy. In the liver, we found that the Gd(2)O(3)@SWNHag was localized in Kupffer cells but were not observed in hepatocytes. In the Kupffer cells, most of the Gd(2)O(3)@SWNHag was detected inside phagosomes, but some were in another cytoplasmic compartment that was most likely the phagolysosome.

Site identification of carboxyl groups on graphene edges with Pt derivatives.

Although chemical functionalization at carboxyl groups of nanocarbons has been vigorously investigated and the identities and quantities of the carboxyl groups have been well studied, the location of carboxyl groups had not previously been clarified. Here, we show that site identification of carboxyl groups is possible by using Pt-ammine complex as a stain. After Pt-ammine complexes were mixed with graphenes in ethanol, many Pt-ammine complex clusters with an average size of about 0.6 nm were found to exist at edges of graphene sheets, indicating that the carboxyl groups mainly existed at the graphene edges. These results will make it easier to add functionalities by chemical modifications for various applications of nanotubes and other nanocarbons.

Micrometer-sized graphitic balls produced together with single-wall carbon nanohorns.

We present in this report a new type of particles with micrometer-order sizes, which we called giant graphitic balls (GG balls). The GG balls are produced by CO2 laser ablation of graphite together with single-wall carbon nanohorns. They have graphitic structures whose layers tend to align parallel with the GG-ball surfaces, resulting in polygonal-like arrangements. Comparing the GG-ball structure with that of the previously reported polygonal graphite-particles, the growth mechanism of the GG ball is discussed briefly.

Controlling the incorporation and release of C60 in nanometer-scale hollow spaces inside single-wall carbon nanohorns.

We succeeded in large-scale preparation of single-wall carbon nanohorns (SWNH) encapsulating C60 molecules in a liquid phase at room temperature using a "nano-precipitation" method, that is, complete evaporation of the toluene from a C60-SWNH-toluene mixture. The C60 molecules were found to occupy 6-36% of the hollow space inside the SWNH, depending on the initial quantity of C60. We showed that the C60 in C60@SWNHox was quickly released in toluene, and the release rate decreased by adding ethanol to toluene. Numerical analysis of the release profiles indicated that there were fast and slow release processes. We consider that the incorporation quantity and the release rate of C60 were controllable in/from SWNHs because SWNHs have large diameters, 2-5 nm.