Chromatographic Methods for Quantitative Determination of Ampicillin, Dicloxacillin and Their Impurity 6-Aminopenicillanic Acid.

Two accurate, precise and sensitive high-performance thin layer chromatography (HPTLC) and high-performance liquid chromatography (HPLC) methods were developed for assay of ampicillin (AMP) and dicloxacillin (DX) in the presence of their impurity, 6-aminopenicillanic acid (APA). Method (A) is HPTLC method; using silica gel HPTLC F254 plates as a stationary phase with methanol: chloroform: acetic acid (1:9: 0.2, by volume) as a developing system. All the bands were scanned at 220 nm. Method (B) is reversed phase- HPLC which depended on isocratic elution using C18 column and mobile phase consisting of acetonitrile: water (60:40, v/v), pH adjusted to 4 with orthophosphoric acid, at a flow rate of 1 mL min-1 and ultraviolet detection at 240 nm. The proposed methods were validated as per ICH guidelines and their linearity was evident in the ranges of 0.5-2 µg band-1, 0.4-2 µg band-1 and 0.2-1.2 µg band-1 for method (A) and 5-40 µg mL-1, 5-40 µg mL-1 and 2-16 µg mL-1 for method (B) for AMP, DX and APA, respectively. The proposed methods were successfully used for assay of AMP and DX in pure form and in pharmaceutical formulation where no interference from the excipients was detected.

Simultaneous HPTLC and RP-HPLC methods for determination of bumadizone in the presence of its alkaline-induced degradation product.

Accurate, selective, sensitive and precise HPTLC-densitometric and RP-HPLC methods were developed and validated for determination of bumadizone calcium semi-hydrate in the presence of its alkaline-induced degradation product and in pharmaceutical formulation. Method A uses HPTLC-densitometry, depending on separation and quantitation of bumadizone and its alkaline-induced degradation product on TLC silica gel 60 F(254) plates, using hexane-ethyl acetate-glacial acetic acid (8:2:0.2, v/v/v) as a mobile phase followed by densitometric measurement of the bands at 240 nm. Method B comprises RP-HPLC separation of bumadizone and its alkaline-induced degradation product using a mobile phase consisting of methanol-water-acetonitrile (20:30:50, v/v/v) on a Phenomenex C(18) column at a flow-rate of 2 mL/min and UV detection at 235 nm. The proposed methods were successfully applied to the analysis of bumadizone either in bulk powder or in pharmaceutical formulation without interference from other dosage form additives, and the results were statistically compared with the established method.