Cyclic testing of six-strand suture techniques for zone 2 flexor tendon lacerations.

BACKGROUND: Biomechanical analysis using cyclic testing for repaired flexor tendons is a clinically relevant method. The aim of this study was to evaluate the tensile properties of two six-strand suture techniques, the triple looped suture and Yoshizu #1 suture techniques using cyclic testing under simulating early active mobilization conditions. METHODS: Twenty-five flexor digitorum profundus tendons harvested from fresh frozen human cadaver hands were repaired in zone 2 utilizing one of three repair techniques: the 2-strand modified Kessler (MK) technique as a control, the triple looped suture (TLS) and Yoshizu #1 suture (Y1) techniques. In each suture technique, 4-0 monofilament nylon sutures were used for core sutures and 6-0 monofilament nylon sutures for circumferential running sutures. Cyclic testing was performed using 20 N with 600 cycles at 1 Hz. RESULTS: Five out of eight specimens in the MK group ruptured during cyclic testing. Thus, this group was excluded from analysis. On the other hand, all tendons in the TLS and Y1 groups tolerated cyclic testing. Average gaps of the TLS and Y1 groups were 0.5 ± 0.8 mm and 1.9 ± 2.2 mm, respectively. All tendons in the TLS group and six out of nine tendons in the Y1 group formed gaps less than 2 mm. Two tendons in the Y1 group formed a gap of 3.8 and 6.6 mm had breakage of peripheral sutures at the first cycle. Mean ultimate tensile force of the TLS and Y1 group measured after cyclic tensing, were 66.2 ± 9.0 N and 65.9 ± 13.1 N, respectively. No statistical difference between the two groups was found in gap and ultimate tensile forces. CONCLUSIONS: This study suggested that the TLS and Y1 techniques have tensile properties to allow early active mobilization. None of tendons repaired with the TLS technique had gaps more than 2 mm.

Diminished cartilage creep properties and increased trabecular bone density following a single, sub-fracture impact of the rabbit femoral condyle.

Traumatic injury to articular cartilage can lead to post-traumatic arthritis. We used a custom pendulum device to deliver a single, near-fracture impact to the medial femoral condyles of rabbits. Impact was localized to a region ∼3 mm in diameter, and impact stress averaged ∼100 MPa. Animals were euthanized at 0, 1, and 6 months after impact. Cartilage mechanical properties from impacted and sham knees were evaluated by creep-indentation testing, and periarticular trabecular bone was evaluated by microCT and histomorphometry. Impact caused immediate and statistically significant loss of cartilage thickness (-40% vs. sham) and led to a greater than twofold increase in creep strain. From 0 to 6 months after impact, the ability of cartilage to recover from creep deformation became significantly impaired (percent recovery different from control at 1 and 6 months). At 1 month, there was a 33% increase in the trabecular bone volume fraction of the epiphysis beneath the site of impact compared to control, and increased bone formation was observed histologically. Taken together, these findings demonstrate that a single, high-energy impact below the fracture threshold leads to acute deleterious changes in the viscoelastic properties of articular cartilage that worsen with time, while at the same time stimulating increased bone formation beneath the impact site.

Single high-energy impact load causes posttraumatic OA in young rabbits via a decrease in cellular metabolism.

Articular cartilage deterioration commonly occurs following traumatic joint injury. Patients with posttraumatic osteoarthritis (PTA) experience pain and stiffness in the involved joint causing limited mobility and function. The mechanism by which PTA occurs has not been fully delineated. The goal of this study was to determine if a single high-energy impact load could cause the development of PTA in 3-month-old NZ White rabbits. Each rabbit underwent the application of a single, rapid, high-energy impact load to the posterior aspect of their right medial femoral condyle using a previously validated mechanism. At regular intervals (0, 1, 6 months) the injured cartilage was harvested and analyzed for the presence of PTA. Each specimen was assessed histologically for cell and tissue morphology and chondrocyte metabolism, including BMP-2 production and synthesis of extracellular matrix (type II procollagen mRNA). Cartilage from the contralateral sham limb, as well as uninjured cartilage from the experimental limb served as internal controls for each animal. Significant changes were found in the morphology of the cartilage including proteoglycan loss along with decreased BMP-2 and type II procollagen mRNA staining. These findings confirm that a single high-energy impact load can cause the development of PTA by disrupting the extracellular matrix and by causing a decrease in chondrocyte metabolism.

Effect of suture material and bone quality on the mechanical properties of zone I flexor tendon-bone reattachment with bone anchors.

PURPOSE: To compare the initial biomechanical properties of zone I flexor tendon to bone repairs performed using pull-out and anchor techniques and to investigate the effect of bone quality and suture materials on the strength of anchor repairs. METHODS: Using computed tomography, we measured bone mineral density and cortical thickness of the distal phalanx of 60 cadaver fingers (mean age, 77 years). Flexor digitorum profundus tendons were then transected at their insertion sites and repaired using a 4-strand grasping suture and either pull-out or anchor fixation. For pull-out repair (n = 20), the suture strands (Supramid 3-0; S. Jackson, Inc., Alexandria, VA) were passed through the distal phalanx and tied over a dorsal button. For anchor repair, 2 bone anchors were inserted into the distal phalanx, and tendons were grasped using either Supramid (n = 21), Ethibond (Ethicon, Inc., Somerville, NJ; n = 10), or FiberWire suture (Arthrex Inc., Naples, FL; n = 9) (all 3-0). Mechanical properties of the repaired tendon-bone constructs were determined in linear, load-to-failure loading and correlated with bone characteristics. RESULTS: The FiberWire-anchor repair group had the best combination of mechanical properties, with ultimate force to failure no different from the pull-out repairs but with greater stiffness and reduced displacement. Pull-out suture repairs had significantly higher ultimate force-to-failure values than did Ethibond-anchor and Supramid-anchor repairs (p < .01). However, pull-out repairs had significantly reduced stiffness and greater displacement at 20 N force than did anchor repairs from all groups (p < .05). Both bone mineral density and cortical thickness correlated significantly with ultimate force (p < .01). Almost all anchors pulled out for bone mineral density below 420 mg/cm(3) or cortical thickness less than 0.31 mm, which occurred only for specimens aged greater than 75 years. CONCLUSIONS: The mechanical properties of the double Mitek bone anchors were sensitive to both suture material and bone quality. FiberWire-anchor repairs provided the best combination of mechanical properties. Pull-out suture repairs had good strength but poor stiffness. Anchor fixation may be contraindicated in patients greater than 75 years because of poor bone quality.

Early healing of flexor tendon insertion site injuries: Tunnel repair is mechanically and histologically inferior to surface repair in a canine model.

Orthopedic injuries often require surgical reattachment of tendon to bone. Tendon ends can be sutured to bone by direct apposition to the bone surface or by placement within a bone tunnel. Our objective was to compare early healing of a traditional surface versus a novel tunnel method for repair of the flexor digitorum profundus (FDP) tendon insertion site in a canine model. A total of 70 tendon-bone specimens were analyzed 0, 5, 10 or 21 days after injury and repair, using tensile and range of motion mechanical testing, histology and densitometry. Ultimate force (a measure of repair strength) did not differ between surface and tunnel repairs at day 0. Both repair types had reduced strength at 10 and 21 days compared to 0 days, indicative of deterioration of suture grasping strength (tendon softening). At 21 days, tendons repaired in a bone tunnel had 38% lower ultimate force compared to surface repairs (p = 0.017). Histological findings were comparable between repair groups at 5 and 10 days but differed at 21 days, when we saw evidence of maturation of the tendon-bone interface in the surface repairs compared to an immature fibrous interface with no evidence of tendon-bone integration in the tunnel repairs. After accounting for bone removed by the tunnel, no difference in bone mineral density or trabecular bone volume existed between surface and tunnel repairs. If the results of our animal study extend to healing of the human FDP insertion, they indicate that FDP tendons should be reattached to the distal phalanx by suture to the cortical surface rather than suture in a bone tunnel.