Possibility of Using Different Calcium Compounds for the Manufacture of Fresh Acid Rennet Cheese from Goat's Milk.

Calcium can be added to cheese milk to influence the coagulation process and to increase cheese yield. Calcium compounds used in the dairy industry show substantial differences in their practical application. Therefore, this study aimed to evaluate the potential use of 0, 5, 10, 15, and 20 mg Ca 100 g-1 of milk in the form of calcium gluconate, lactate, and carbonate as alternatives to calcium chloride in manufacturing fresh acid rennet cheese from high-pasteurized (90 °C, 15 s) goat's milk. The pH value of the cheese was reduced most strongly by the addition of increasing doses of calcium lactate (r = -0.9521). Each cheese sample showed increased fat content with the addition of calcium. Only calcium chloride did not reduce protein retention from goat's milk to cheese. The addition of 20 mg Ca 100 g-1 of milk in the form of gluconate increased cheese yield by 4.04%, and lactate reduced cheese yield by 2.3%. Adding each calcium compound to goat's milk significantly increased Ca and P levels in the cheese (p ≤ 0.05). The highest Ca levels were found in cheese with the addition of 20 mg Ca 100 g-1 of milk in the form of lactate. In all groups, similar contents of Mn, Mo, and Se were found. Calcium addition significantly affected cheese hardness, while higher calcium concentrations increased hardness. Carbonate caused the greatest increase in the cohesiveness of cheese. The addition of calcium compounds increased the adhesiveness and springiness of cheese compared to controls. The cheese with calcium chloride had the highest overall acceptability compared to the other cheese samples. The addition of calcium carbonate resulted in a lower score for appearance and consistency, and influenced a slightly perceptible graininess, sandiness, and stickiness in its consistency, as well as provided a slightly perceptible chalky taste.

Chemical Composition and Bioactivity of Laboratory-Fermented Bee Pollen in Comparison with Natural Bee Bread.

Bee bread is a valuable product obtained from the hive on a relatively small scale, while bee pollen is more easily available. Therefore, an effective laboratory method of converting pollen into a bee bread substitute is desired. The aim of the research was to verify the influence of selected factors (temperature, ultrasound) on the quality of obtained product using Lactobacillus rhamnosus inoculum. The composition of the fermented pollen was analyzed using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), Raman spectroscopy, and SDS-PAGE and compared to natural bee bread and the original pollen. In vitro biological activity was assessed as antioxidant activity using a yeast model (BY4741 and sod1∆ strains). Fermentation of pollen occurred spontaneously and after inoculation, as demonstrated by lower pH and higher lactic acid content. Raman spectroscopy and ICP-OES confirmed changes in composition compared to the initial pollen. Compared to bee bread, the fermented pollen showed a higher content of polyphenols and comparable antioxidant activity; moreover, it accelerated yeast growth rate. In addition, a protective effect was observed for Cu/Zn-superoxide dismutase 1 (sod1∆ yeast mutant exposed to hydrogen peroxide-induced oxidative stress). The higher fermentation temperature (25 °C) produces a more bee-bread-like product, while the use of ultrasound and starter culture seems to have no positive effect.

Bioavailability of Macroelements from Synbiotic Sheep's Milk Ice Cream.

To determine the potential bioavailability of macroelements (Ca, Mg, P, K), probiotic ice cream samples (Lactaseibacillus paracasei L-26, Lactobacillus casei 431, Lactobacillus acidophilus LA-5, Lactaseibacillus rhamnosus and Bifidobacterium animalis ssp. lactis BB-12) from sheep's milk with inulin, apple fiber and inulin, or apple fiber and control samples were submitted to in vitro digestion in the mouth, stomach and small intestine. The bioavailability of calcium in the ice cream samples ranged from 40.63% to 54.40%, whereas that of magnesium was 55.64% to 44.42%. The highest bioavailability of calcium and magnesium was shown for the control samples. However, adding 4% inulin reduced the bioavailability of calcium by about 3-5% and magnesium only by about 5-6%. Adding 4% apple fiber reduced the bioavailability of calcium by as much as 6-12% and magnesium by 7-8%. The highest bioavailability of calcium was determined in ice cream with L. paracasei, and the highest bioavailability of magnesium was determined in ice cream with L. casei. The bioavailability of phosphorus in ice cream ranged from 47.82% to 50.94%. The highest bioavailability of phosphorus (>50%) was in sheep ice cream fermented by B. animalis. In the control ice cream, the bioavailability of potassium was about 60%. In ice cream with inulin, the bioavailability of potassium was lower by 3-4%, and in ice cream with apple fiber, the bioavailability of potassium was lower by up to 6-9%. The bioavailability of potassium was significantly influenced only by the addition of dietary fiber. The results of the study confirmed the beneficial effect of bacteria on the bioavailability of Ca, Mg and P.

The Impact of a Pulsed Light Stream on the Quality and Durability of the Cold-Stored Longissimus Dorsal Muscle of Pigs.

The purpose of this study was to investigate the effect of pulsed light application (exposure to a pulsed light beam (PL) of 400 Hz for a period of 60 s, with an energy dose of 600 mW and wavelengths of 660 and 405 nm) on the physicochemical, technological, and sensory properties, as well as the nutritional value and shelf life of cold-storage pig longissimus dorsi muscle. Each muscle was divided into six parts, three of which were control samples, and the rest were exposed to pulsed light. The detailed laboratory tests of the meat were conducted 1, 7, and 10 days after slaughter. The meat was cold stored at +3 °C ± 0.5 °C. The study showed that the application of pulsed light has a favorable effect on lowering the TBARS index, oxidation-reduction potential, and water activity values. In addition, the application of PL had no statistically significant effect on the variation in the perception of selected sensory characteristics of meat. Furthermore, PL processing, as a low-energy-intensive method that can be environmentally friendly and thus have a large potential for implementation, is an innovative way to extend the shelf life, especially of raw meat, without a negative impact on its quality. This is of particular importance for food security (especially in the quantitative and qualitative aspects of food, but also in terms of food safety).

Oak Biomass in the Form of Wood, Bark, Brushwood, Leaves and Acorns in the Production Process of Multifunctional Biochar.

Biochar from forest biomass and its remains has become an essential material for environmental engineering, and is used in the environment to restore or improve soil function and its fertility, where it changes the chemical, physical and biological processes. The article presents the research results on the opportunity to use the pyrolysis process to receive multifunctional biochar materials from oak biomass. It was found that biochars obtained from oak biomass at 450 and 500 °C for 10 min were rich in macronutrients. The greatest variety of the examined elements was characterized by oak-leaf pyrolysate, and high levels of Ca, Fe, K, Mg, P, S, Na were noticed. Pyrolysates from acorns were high in Fe, K, P and S. Oak bark biochars were rich in Ca, Fe, S and contained nitrogen. In addition, biomass pyrolysis has been found to improve energy parameters and does not increase the dust explosion hazard class. The oak biomass pyrolytic at 450 and 500 °C after 10 min increases its caloric content for all samples tested by at least 50%. The highest caloric value among the raw biomass tested was observed in oak bark: 19.93 MJ kg-1 and oak branches: 19.23 MJ kg-1. The mean and highest recorded Kstmax were 94.75 and 94.85 bar s-1, respectively. It can be concluded that pyrolysis has the potential to add value to regionally available oak biomass. The results described in this work provide a basis for subsequent, detailed research to obtain desired knowledge about the selection of the composition, purpose, and safety rules of production, storage, transport and use of biochar materials.

Application of Calcium Citrate in the Manufacture of Acid Rennet Cheese Produced from High-Heat-Treated Goat's Milk from Spring and Autumn Season.

The stability of milk proteins is affected by changes in the pH value of milk, the heating temperature, and the addition of calcium compounds or chelating agents, which can cause alterations in calcium distribution. The purpose of this study was to determine the potential of the use of calcium citrate to manufacture fresh acid rennet cheese from high-temperature-pasteurized goat's milk (90 °C, 15 s) from the spring and autumn season and the effect of the calcium dose used on the physicochemical and organoleptic properties of the cheese. Autumn milk was found to be a richer source of total solids, confirming the effect of the production season on milk quality. The applied doses of calcium did not cause the denaturation of goat milk proteins and allowed pasteurization to take place at 90 °C for 15 s. The addition of calcium citrate resulted in a significant increase in the pH value of milk and cheese compared to the control sample. Adding 15 and 20 mg of Ca 100 g-1 to milk as citrate had the most beneficial effect on increasing protein retention in cheese in both seasons, showing a rise from 1.33% to 2.40%. The production season significantly influenced the cheese yield. The control goat cheese from the autumn season showed a 6.85% higher yield compared to the spring cheese. An increase in cheese yield was also observed as the calcium dose of milk increased. The content of micro- and microelements in cheese was affected by the production season. The addition of calcium citrate to milk resulted in a significant increase in the calcium content of cheese-from 120.83 to 147.45 mg 100 g-1 in the spring season and from 130.66 to 151.21 mg 100 g-1 in the autumn season. Increasing the dose of calcium increased the hardness of cheese samples by 1.37 N in the spring and 0.90 N in the autumn. The organoleptic evaluation showed that adding calcium to milk did not significantly affect the organoleptic characteristics of goat cheese.

The Static Magnetic Field Regulates the Structure, Biochemical Activity, and Gene Expression of Plants.

The purpose of this paper is to review the scientific results and summarise the emerging topic of the effects of statistic magnetic field on the structure, biochemical activity, and gene expression of plants. The literature on the subject reports a wide range of possibilities regarding the use of the magnetic field to modify the properties of plant cells. MFs have a significant impact on the photosynthesis efficiency of the biomass and vigour accumulation indexes. Treating plants with SMFs accelerates the formation and accumulation of reactive oxygen species. At the same time, the influence of MFs causes the high activity of antioxidant enzymes, which reduces oxidative stress. SMFs have a strong influence on the shape of the cell and the structure of the cell membrane, thus increasing their permeability and influencing the various activities of the metabolic pathways. The use of magnetic treatments on plants causes a higher content of proteins, carbohydrates, soluble and reducing sugars, and in some cases, lipids and fatty acid composition and influences the uptake of macro- and microelements and different levels of gene expression. In this study, the effect of MFs was considered as a combination of MF intensity and time exposure, for different varieties and plant species. The following article shows the wide-ranging possibilities of applying magnetic fields to the dynamics of changes in the life processes and structures of plants. Thus far, the magnetic field is not widely used in agricultural practice. The current knowledge about the influence of MFs on plant cells is still insufficient. It is, therefore, necessary to carry out detailed research for a more in-depth understanding of the possibilities of modifying the properties of plant cells and achieving the desired effects by means of a magnetic field.

The Use of Wood Pellets in the Production of High Quality Biocarbon Materials.

Biomass is one of the most important sources of renewable energy. One of the most widely used biomass biofuels is wood pellets. It is an economical, homogeneous and easy-to-use raw material. Biomass is used to generate low-emission energy utilizing the pyrolysis process. Pyrolysis allows for higher energy efficiency with the use of commonly available substrates. This thesis presents the results of research on the possibility of using the pyrolysis process to produce high-energy biocarbons from wood pellets. Data on basic energy parameters and explosivity of biocarbon dust were compiled as criteria for the attractiveness of the solution in terms of energy utility. The research used pellets made of oak, coniferous, and mixed sawdust, which were subjected to a pyrolysis process with varying temperature and time parameters. Carbon, ash, nitrogen, hydrogen, volatile substances, heavy metals, durability and calorific value of the tested materials were carried out. The highest increase in calorific value was determined to be 63% for biocarbons obtained at 500 ℃ and a time of 15 min, compared with the control sample. The highest calorific value among all analyzed materials was obtained from coniferous pellet biocarbon at 31.49 MJ kg-1. Parameters such as maximum explosion pressure, Pmax, maximum pressure increase over time, (dp/dt)max, and explosion rates, Kst max, were also analyzed. It was noted that biomass pyrolysis, which was previously pelletized, improved the energy parameters of the fuel and did not increase the risk class of dust explosion. The lowest and highest recorded values of Kst max for the analyzed materials were 76.53 and 94.75 bar s-1, respectively. The study concluded that the process used for processing solid biofuels did not affect the increase in the danger of dust explosion. The results presented in this article form the basis for further research to obtain detailed knowledge of the safety principles of production, storage, transport and use of these new fuels.

Microbiological and Physicochemical Composition of Various Types of Homemade Kombucha Beverages Using Alternative Kinds of Sugars.

Kombucha is a beverage made by fermenting sweetened tea with a symbiotic culture of yeast and bacteria. Literature data indicate that the kombucha beverage shows many health-promoting properties such as detoxification, chemo-preventive, antioxidant, antimicrobial, antifungal, and general strengthening. The research conducted focuses on the analysis of polyphenolic compounds formed in the fermentation process using ultra-efficient liquid chromatography, as well as on checking the antimicrobial properties of kombucha against pathogenic bacteria and yeasts found in food. Analysis of the composition of the tea mushroom (SCOBY) microflora using the MALDI TOF MS Biotyper mass spectrometer showed 8 species of bacteria and 7 species of yeasts. In vitro studies confirm the bactericidal and bacteriostatic properties of fermented kombucha beverages, with white and green tea beverages showing the highest antibacterial activity. The bacteria Staphylococcus aureus and yeast Candida albicans were the most sensitive to the effects of kombucha tea beverages. UPLC chromatographic analysis confirmed the presence of 17 bioactive compounds in kombucha beverages that can affect human health. The analyses conducted were aimed at indicating the best recipe and conditions to prepare a kombucha beverage, which allowed the selection of the version with the best health-promoting properties. Fermented kombucha teas contain many elements such as aluminium, calcium, iron, potassium, magnesium, sodium, phosphorus, and sulphur.

Spatial, temporal and environmental differences in concentrations of lead in the blood of Mute swans from summer and winter sites in Poland.

Lead (Pb) is a highly toxic pollutant and represents a serious threat to wildlife, affecting various systems in animal bodies. Especially prone to Pb poisoning are waterbirds, which may inadvertently ingest spent gunshot, fishing sinkers and contaminated sediments. This research thus focused on evaluating Pb concentrations in the blood of 170 Mute swans (Cygnus olor; a widespread species of waterbirds) at their summer (urban locations in Malopolskie and rural locations in Swietokrzyskie regions) and winter (the urban section of Wisla River in Krakow) sites in Poland (Europe). The study concentrated on comparing blood Pb concentrations according to sites and locations, verifying the influence of sex and age factors, examining the impact on hematocrit (Ht), glutathione (GSH) levels and body condition. Mean blood Pb concentrations (measured with ICP-OES) differed significantly between summer and winter sites (Regression by Maximum Likelihood Estimation (RML), p < 0.001) reaching higher values at winter sites. Concentrations did not differ from year to year (RML, p = 0.028). At summer sites, concentrations differed from location to location: swans from urban locations in Malopolskie had higher blood Pb concentrations (0.055 µg/g) than from rural Swietokrzyskie (0.008 µg/g; RML, p < 0.001). In summer and winter birds, neither sex nor age groups differed significantly the concentrations (RML, p > 0.231). Pb concentrations correlated weakly with Ht and GSH levels (Spearman test) and had no influence on body condition (proxied by scaled mass index; GLM, p = 0.246). We concluded that differences between summer and winter sites were dictated mainly by the type of habitat (rural vs. urban) that birds occupied in different seasons.

The Use of HPTLC and SDS-PAGE Methods for Coniferous Honeydew Honey Fingerprinting Compiled with Mineral Content and Antioxidant Activity.

Fir honeydew honey is a uniquely beneficial product which is often subjected to adulteration; however, pollen analysis is not useful to verify this honey type. Fourteen samples of EU protected designation of origin fir honeydew honey gathered directly from apiaries were studied. Standards of legal requirements and additional parameters, i.e., specific optical rotation, mineral content, and antioxidant activity, were tested. Five nectar honeys of different varieties were used as a comparative material. HPTLC and SDS-PAGE methods were used to fingerprint the honey types. All honeys tested fulfilled the quality requirements in terms of water content, pH, total acidity, conductivity, HMF, and diastase number. They were defined as dark amber on the Pfund scale and exhibited positive specific rotation (+2.5 to 25). Honeydew honey surpassed the tested nectar honeys in terms of mineral content and antioxidant activity as well as total polyphenolic content, except for buckwheat honey. The sugar and polyphenolic profile obtained by HPTLC allowed to distinguish honeydew from nectar honeys. The same was achieved by SDS-PAGE protein profiling. Both techniques seem to be cheap and quick tools for precisely distinguishing honeydew honey.

The Study of Chemical Profile and Antioxidant Properties of Poplar-Type Polish Propolis Considering Local Flora Diversity in Relation to Antibacterial and Anticancer Activities in Human Breast Cancer Cells.

Nine samples of ethanolic extracts of poplar-type propolis (EEP) originated from South-Eastern Poland were analyzed in terms of the diversity of the flora around the apiary. The mineral composition, antioxidant properties, polyphenolic profile (HPTLC), and main polyphenolic constituents (HPLC-DAD) were determined. Only minor differences in chemical composition and antioxidant capacity between tested EEPs were found regardless of their botanical origin. However, the biological activity of the EEPs was more diversified. The tested EEPs showed stronger antibacterial activity against Gram-negative bacteria (Escherichia coli) compared to Gram-positive bacteria (Staphylococcus aureus and Staphylococcus epidermidis). Staphylococci biofilm inhibition occurred as a result of exposure to the action of four out of nine EEPs (P1-P4). Due to the various compositions of individual EEPs, a different MCF-7 cellular response was observed according to inhibition of cells migration and proliferation. Almost every sample inhibited the migration of breast cancer cells at a low concentration (0.04 µg/mL) of propolis. Even at the lowest concentration (0.02 µg/mL), each EEP inhibited the proliferation of MCF-7 cells, however, the level of inhibition varied between samples.

Plant Material as a Novel Tool in Designing and Formulating Modern Biostimulants-Analysis of Botanical Extract from Linum usitatissimum L.

Nowadays, researchers are looking into next-generation biostimulants that can be designed as a dedicated agronomic tool based on plant materials. The aim of the present study was to develop a novel biostimulating product, based on plant material in the form of linseed aqueous extracts. The scope of the research included the physicochemical characterization of the product and identification of its biostimulating potential. The study has confirmed that the plant biostimulant derived from L. usitatissimum can be used as a viable agronomic tool for growing soybean. The designed and produced biostimulant is rich in bioactive compounds, including amino acids, free fatty acids, carbohydrates, and micro- and macroelements. The tested biostimulant showed significantly lower values of surface tension in relation to water and a commercial biostimulant. The soybean crops responded to the application of the preparation by improvements in agronomic and morphological levels. The linseed macerates were effective in terms of soybean yields and profitability. Our findings serve as preliminary evidence for the viability of designing and developing novel biostimulants derived from plant materials. This comprehensive approach to designing and formulating novel bioproducts necessitates more extensive and targeted research to fully explain the mechanisms behind the improvements observed in the soybean cultivation.

Searching for Differences in Chemical Composition and Biological Activity of Crude Drone Brood and Royal Jelly Useful for Their Authentication.

Drone brood is a little-known bee product which is frequently considered as a male equivalent of royal jelly and is sometimes used as its adulterant. The aim of the study was to compare the chemical composition and biological activity of both bee products originated from the same apiaries (n = 3) limiting the influence of genetic and environmental factors. Moreover, for drone brood study covered testing three stages of larval development (days 7, 11, and 14). The comparison included mineral composition (ICP-OES method), protein content and protein profile (SDS-PAGE), testosterone and estradiol content (ELISA tests). HPTLC method was used to analyze of sugar, amino acids, and polyphenolic profile of drone brood and royal jelly. Moreover, their antioxidant and enzymatic properties were compared. A lot of similarities between drone brood and royal jelly were found in terms of chemical components. However, drone brood was more abundant in iron and manganese, reducing sugars and some amino acids, especially proline, tyrosine, and leucine. It contained more testosterone (especially on the 14th day) and estradiol (on the 7th day). The greatest differences in the enzymatic activities and polyphenolic profile were found. Diastase and α-glucosidase activity were found as specific enzymes of the drone brood. Similarly, ferulic and ellagic acids were characteristic for brood and were not present in royal jelly. The study showed a lot of similar features for both tested bee products, however, some specific markers which can serve to differentiate drone brood and royal jelly were found.

Assessment of the Botanical Origin of Polish Honeys Based on Physicochemical Properties and Bioactive Components with Chemometric Analysis.

Is it possible to characterize the types of honey based on their chemical composition, their content of bioactive substances, and their physicochemical properties? The objective of this study was a comparative analysis of four types of honey from the Carpathian Foothills area, located in south-east Poland, based on the content of the main phenolic acids and proline, the mineral composition, and selected physicochemical properties. Most analyses, such as those of phenolic acids, sugars, and proline content, in honey samples were performed using chromatographic methods. These experiments demonstrated that honeydew honeys were the richest in phenolic acids, minerals, as well as oligosaccharides, compared to other honeys. Dark-colored honeys were characterized by the highest proline content. The dominant elements in all types of honey were potassium and calcium. The results of the present study show that analyses of specific phenolic acids, minerals, proline, and sugar content, in combination with chemometrics analysis, may successfully differentiate between the biological origins of honey samples and allow the preliminary verification of the samples before performing time-consuming pollen analysis.

Uncovering the multi-level response of Glycine max L. to the application of allelopathic biostimulant from Levisticum officinale Koch.

The interest expressed by the agriculture in the category of innovative biostimulants is due to the intensive search for natural preparations. Our study is the first ever to report a complex approach to the use of allelopathic extracts from Levisticum officinale Koch. roots in soybean cultivation, includes analyses of morphological observations, and analyses of biochemical indicators. Hot method of aqueous extraction was applied. The extracts were administered via foliar application and soil treatment. Lovage extracts had high contents of polyphenolic compounds and rich micro- and macroelemental composition. The infusions did not contain gibberellic acid and indole-3-acetic acid but the abscisic acid and saccharose, glucose, and fructose were found. The extracts modified soybean plant physiology, as manifested by changes in biometric traits. Plants responded positively by increased yield. Seeds from the treated plants had higher contents of micro- and macroelements, as well as total concentrations of lipids (with a slight decrease in protein content). In addition, they featured changes in their amino acid profile and fatty acid composition. The application of allelopathic biostimulant caused increased concentrations of isoflavones and saponins. The natural biostimulants from Levisticum officinale may become a valuable tool in the sustainable agriculture.

Analysis of the Effect of the Biomass Torrefaction Process on Selected Parameters of Dust Explosivity.

This article presents the findings of a study investigating the explosion and combustion parameters of dust from the raw biomass of wheat straw and energy willow and from the products of biomass torrefaction generated at temperatures ranging from 220 to 300 °C. Agricultural waste and energy crops and their modifications, e.g., in the torrefaction process, did not find a place in explosive risk research, which the authors decided to present in their work. The study was designed to estimate explosion hazard during the processing of the materials into fuels and during the storage process. The measurements recorded a maximum explosion pressure Pmax in the case of dust from biomass ranging from 7.2 to 7.3 bar and for dust from torrefied materials amounting to 7.5-9.2 bar, and a maximum rate of pressure rise over time (dp/dt)max in raw biomass ranging from 201.4 to 261.3 bar/s and in torrefied materials amounting to 209.6-296.6 bar/s. The estimated explosion index Kstmax for raw biomass was 55-72 m*bar/s and for torrefied materials was in the range from 57 to 81 m*bar/s. In the results, the authors present values for specific types of fuel which differ significantly depending on the type of biomass. The research findings show that the torrefaction process used in fuel production is not associated with a significantly greater risk of explosion and the materials obtained may safely be used as an alternative to conventional solid fuels. Given the growing interest in the use of biomass and in the variety of biomass processing methods for energy-related purposes, it seems there is a need for research to develop appropriate guidelines and for effective practices to be introduced in the energy industry in order to ensure the safety of the processes used in the production of novel fuels especially in small installations converting these materials into more efficient energy material.

Antioxidant Activities and Volatile Flavor Components of Selected Single-Origin and Blend Chocolates.

The biological activity of chocolates gains more and more attention of consumers. Its antioxidant properties depend, among other factors, mainly on the origin of cocoa and the characteristics that this origin gives to the final product. Therefore, the aim of the study was to measure and compare the total content of polyphenols, antioxidant activity, and key odorants of commercial chocolates made from blend cocoa with single-origin ones. The highest content of polyphenols was found in 90% blend cocoa chocolate and single-origin samples, while the lowest content was exhibited by 100% chocolate from blend cocoa mass. The highest antioxidant activity measured by 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) and ferric reducing antioxidant power (FRAP) assays was observed in the sample of chocolate with 90% cocoa solids from blend mass, followed by single-origin chocolates. A high positive correlation between ABTS assay and the total polyphenol and phenolic acids' content, as well as among the total content of polyphenols, flavonoids, and phenolic acids was found. Mineral composition analysis showed that dark chocolate is a valuable source of some elements, especially Mg, Fe, and Zn. Potentially toxic elements were not detected or below permitted limits. Moreover, it was noticed that the main volatile compound in all tested samples was acetic acid, but pyrazines were considered the most important group of chocolate odorants.

Use of Calcium Amino Acid Chelate in the Production of Acid-Curd Goat Cheese.

Amino acid chelates are a new group of compounds approved for food enrichment, however there is no previous research using calcium amino acid chelate to enrich goat's milk products. The purpose of this research was to evaluate the possibility of using calcium amino acid chelate to produce goat's acid-curd cheese. In this study, four types of acid-curd cheeses from goat's milk subjected to 85 °C/5 min treatment were produced: control cheeses-made from milk without calcium addition and cheeses from milk enriched with 30, 35 and 40 mg of Ca (in 100 g of milk) in the form of calcium amino acid chelate. Goat cheese with calcium amino acid chelate had a higher moisture content, and a lower fat content. More fat was separated with the whey. In cheeses made from the milk with calcium amino acid chelate there was no goaty taste. Enrichment with 35 mg of Ca in 100 g of goat milk increased the calcium content in cheese by 60.5% in comparison to the control sample. However, the enrichment of goat milk with 40 mg Ca (in 100 g of processed milk) increased the calcium content in cheese by only 63.29%.

Impact Mineralization of Chokeberry and Cranberry Fruit Juices Using a New Functional Additive on the Protection of Bioactive Compounds and Antioxidative Properties.

Chicken eggshells can be used as an attractive dietary source of mineral compounds, including calcium (Ca). However, the effects of chicken eggshell powder (CESP) on berry fruit juices have not been studied to date. Therefore, the objective of this study was to evaluate the effect of its addition to juices from chokeberry and cranberry on their phytochemical properties. The juices were determined for contents of polyphenols (determined by ultra-efficient liquid chromatography coupled with a mass detector (UPLC-PDA-ESI-MS/MS)), macro- and microelements (by inductively coupled plasma - optical emission spectrometry (ICP-OES)), and organic acids (by high-performance liquid chromatography (HPLC-PDA)) as well as for their antioxidative activity by radical scavenging capacity (ABTS) and ferric reducing antioxidative power (FRAP) assay, color profile (CIE L* a* b* system), and sensory attributes. The study results demonstrate that CESP addition to chokeberry and cranberry juices enriched them with minerals and increased their Ca content 25.7 times and 66.3 times, respectively, compared to the control samples. Juices supplementation with CESP significantly decreased their acidity and total organic acids content as well as increased their pH value. Chokeberry and cranberry juices supplementation with 1% CESP caused no significant changes in the amount of precipitate and their color, but it significantly improved their taste. For this reason, CESP addition in the amount of up to 1% can be suggested as the optimal supplementation of berry fruit juices. The study also demonstrated that CESP addition in the amount of up to 1% caused no significant differences in the content of polyphenolic compounds and in the antioxidative activity of juices, which can be deemed important from the viewpoint of their putative health benefits. In addition, the heat treatment of juices contributed to only a 4% loss of polyphenolic compounds from the CESP-supplemented juices compared to the 6% loss from the non-supplemented juices.