Mechanism and Kinetics of the Phase Formation and Dissolution of NaxWO3 on a Pt Electrode in a Na2WO4-WO3 Melt.

A comprehensive study concerning the phase formation mechanism and growth/dissolution kinetics of sodium tungsten bronze crystals during the electrolysis of a 0.8Na2WO4-0.2WO3 melt was carried out. The regularities of deposit formation on a Pt(111) working electrode were investigated experimentally using cyclic voltammetry, chronoamperometry, scanning electron microscopy, and X-ray diffraction analysis. Models have been developed to calculate the current response during the formation, growth and dissolution of a two-phase deposit consisting of NaxWO3 and metallic tungsten or two oxide tungsten bronzes with different sodium content. These models consider mass transfer to the electrode and nuclei; chemical and electrochemical reactions with the participation of polytungstate ions, Na+, Na0, and O2-; as well as the ohmic drop effect. The approach was proposed to describe the dissolution of an NaxWO3 crystal with a nonuniform sodium distribution. The fitting of cyclic voltammograms was performed using the Levenberg-Marquardt algorithm. The NaxWO3 formation/growth/dissolution mechanism was determined. Concentration profiles and diffusion coefficients of [WnO3n]-, reaction rate constants, number density of nuclei, and time dependencies of crystal size were calculated. The proposed approaches and models can be used in other systems for the cyclic voltammogram analysis and study of the mechanism and kinetics of electrode processes complicated by phase formation; parallel and sequential electrochemical and chemical reactions; as well as the formation of a deposit characterized by a nonuniform phase and/or chemical composition.

Thermal Conductivity of FLiNaK in a Molten State.

Although the thermal conductivity of molten salt mixtures is of interest for many potential technological applications, precise values are often hard to obtain. In this study, the thermal diffusivity of FliNaK was studied in a molten state using the laser flash method and found to be very slightly dependent on temperature. The heat capacity of FliNaK was measured using the DSC method. There was a minor difference between our results and data from the literature. From calculations based on thermal diffusivity, density and heat capacity values, thermal conductivity was shown to decrease with temperature.

Electrochemical Reduction of La2O3, Nd2O3, and CeO2 in LiCl-Li2O Melt.

The reduction of pellets composed of individual CeO2, Nd2O3 and a La2O3-Nd2O3-CeO2 mixture by lithium extracted on a cathode during lithium chloride electrolysis at 650 °C was studied. The methods of cyclic voltammetry, electron microscopy, including determination of the elemental composition of the studied objects, and X-ray diffraction analysis were applied for the present study. The reduction degree of rare-earth metal (REM) oxides was determined using both the bromine method and reduction melting of the samples in the graphite crucible. The formation of the metallic phase composed of the rare-earth elements (REEs) was not observed even at the cathode potentials, corresponding to the formation of the liquid alkali metal phase, and lithium extraction, which, in the quantitative ratio, exceeds greatly the values needed for the reduction reaction. CeO2 was found to reduce to Ce2O3.

Simulation of Diffusion-Controlled Growth of Interdependent Nuclei under Potentiostatic Conditions.

The problem of diffusion-controlled growth following an instantaneous nucleation event was studied within the framework of a new numerical model, considering the spatial distribution of hemispherical nuclei on the electrode surface and the mutual influence of growing nuclei via the collision of 3D diffusion fields. The simulation of the diffusion-controlled growth of hexagonal and random ensembles was performed at the overpotential-dependent number density of nuclei. The diffusion flow to each nucleus within a random ensemble was simulated by the finite difference method using the derived analytical expressions for the surface areas and the volumes formed at the intersection of 3D diffusion fields with the side faces of a virtual right prism with a Voronoi polygon base. The implementation of this approach provides an accurate calculation of concentration profiles, time dependences of the size of nuclei, and current transients. The results, including total current density transients, growth exponents, and nucleus size distribution, were compared with models developed within the concept of planar diffusion zones, the mean-field approximation and the Brownian dynamics simulation method, as well as with experimental data from the literature. The prospects of the model for studying the initial stages of electrocrystallization were discussed.

Simulation of 3D Electrochemical Phase Formation: Mixed Growth Control.

Processes of nucleation and growth largely determine the structure and properties of thin films obtained by electrodeposition on foreign substrates. Theoretical aspects of the initial stages of electrochemical phase formation under constant and variable overpotentials are considered in this work. Simulation of multiple nucleation with mixed (charge transfer, and diffusion) controlled growth was performed for three cases (cyclic voltammetry, potentiostatic electrodeposition, and galvanostatic electrodeposition). The influence of the bulk concentration of depositing ions and the exchange current density at the electrolyte/nucleus interface on cyclic voltammograms (CVs), transients of current and overpotential, as well as the number and size of non-interacting new-phase nuclei was analyzed. It is found that, under galvanostatic conditions, the number of nuclei decreases as the concentration of depositing ions increases due to a more rapid decrease in overpotential. The proposed model was applied to determine the diffusion coefficient, exchange current density, and transfer coefficient considering the experimental CV.

Investigation of the Quasi-Binary Phase Diagram FLiNaK-NdF3.

The NdF3 solubility in molten eutectic FLiNaK, which is a conceivable medium for a molten salt reactor (MSR), was determined by the quasi-binary phase diagram FLiNaK-NdF3. The eutectic mixture FLiNaK was prepared by direct melting of components LiF, NaF and KF·HF. The acidic anhydrous salt (KF·HF) was used instead of the hygroscopic KF. The NdF3 was sintered by hydrofluorination of Nd2O3. The oxygen impurity in the prepared eutectic FLiNaK, determined by an oxygen analyzer LECO OH836, was 0.036 wt.%, whereas the NdF3 contained 0.04 wt.% of oxygen. A part of the FLiNaK-NdF3 quasi-binary phase diagram was obtained using two thermal analysis techniques: differential thermal analysis (DTA) and differential scanning calorimetry (DSC). The FLiNaK-NdF3 phase diagram in the region of 0-30 mol.% NdF3 contains one eutectic at 2 mol.% NdF3 and 450 °C and two peritectic points: 8 mol.% NdF3 at 500 °C and 22 mol.% NdF3 at 575 °C. The region of the FLiNaK-NdF3 phase diagram below the liquidus line is rather complicated due to the complex structure of the multicomponent system in its molten state, as in its solid state. The NdF3 solubility in FLiNaK is about 5 mol.% at 490 °C and 29 mol.% at 700 °C; this means that the process of the MA transmutation in the MSR can be carried out in molten FLiNaK with a content of actinides as high as 15-20 mol.% in the temperature range of 550-650 °C.