Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
MethodsX ; 5: 1346-1363, 2018.
Artigo em Inglês | MEDLINE | ID: mdl-30416978

RESUMO

This paper describes the development of a custom-designed underwater scanner to support the experimental works for characterizing irradiated fuel stored in the TRIGA PUSPATI pool by means of radiography technique. Materials used to build the scanner are aluminum 6061, lead and teflon. Three main units that make up the scanner are rig structure, arm block and collimator. Collimator is designed to control radiation exposure by opening and closing the shutter. The experimental works were conducted underwater at 5-m depth hence water tightness is one of the main design criteria. Radiation in terms of gamma energy is captured by radiography film which after development and processing revealed the image of the radiation impact in terms of pixel and gray value. The film size used is 4in x 8in which was slot in the collimator. To validate the scanner, fuel element containing 8.5 wt% and 12 wt% enriched Uranium 235 were used. It was found that the experimental output is consistent with the fuel type and confirmed that the scanner is viable for fuel characterization study.

2.
Waste Manag ; 29(2): 797-803, 2009 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-18789675

RESUMO

In this study we have investigated the possibility of processing waste rubber gloves using pyrolysis. Y-zeolite catalyst was employed to upgrade the pyrolysis products to give higher yields of valuable aromatic compounds such as toluene and xylenes. The composition of the pyrolysis products was determined using gas chromatography with linked mass spectrometry (GC-MS), gas chromatograph equipped with a flame ionization detector (GC-FID), gas chromatograph fitted with dual thermal conductivity detectors (GC-TCD), and Fourier Transform Infra-Red Spectrometry (FT-IR). It was found that when rubber gloves were pyrolysed in the absence of a catalyst, the pyrolysis oil consisted mainly of limonene and oligomers of polyisoprene. When Y-zeolite was added to the reaction system, the yields of toluene, xylene, methylbenzenes, ethylbenzenes, and naphthalenes increased dramatically. The Y-zeolite also catalysed the decomposition of limonene, which was absent from the catalytic pyrolysis products. The presence of the Y-zeolite catalyst also increased the yield of hydrocarbon gases. The tests were carried out at both 380 degrees C and 480 degrees C and it was found that the higher reaction temperature led to increased yields of all the major compounds, both in the presence and absence of the Y-zeolite catalyst.


Assuntos
Luvas Cirúrgicas , Incineração , Látex , Zeolitas/química , Catálise , Cromatografia Gasosa , Termogravimetria
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...