Coupling between waveguides and microresonators: the local approach.

Coupling between optical microresonators and waveguides is a critical characteristic of resonant photonic devices that has complex behavior that is not well understood. When the characteristic variation length of the microresonator modes is much larger than the waveguide width, local coupling parameters emerge that are independent of the resonator mode distributions and offer a simplified description of coupling behavior. We develop a robust numerical-fitting-based methodology for experimental determination of the local coupling parameters in all coupling regimes and demonstrate their characterization along a microfiber waveguide coupled to an elongated bottle microresonator.

Rectangular SNAP microresonator fabricated with a femtosecond laser.

Surface nanoscale axial photonics (SNAP) microresonators, which are fabricated by nanoscale effective radius variation (ERV) of the optical fiber with subangstrom precision, can be potentially used as miniature classical and quantum signal processors, frequency comb generators, and ultraprecise microfluidic and environmental optical sensors. Many of these applications require the introduction of nanoscale ERV with a large contrast α, which is defined as the maximum shift of the fiber cutoff wavelength introduced per unit length of the fiber axis. The previously developed fabrication methods of SNAP structures, which used focused CO2 and femtosecond laser beams, achieved α∼0.02 nm/µm. Here we develop a new, to the best of our knowledge, fabrication method of SNAP microresonators with a femtosecond laser, which allows us to demonstrate a 50-fold improvement of previous results and achieve α∼1 nm/µm. Furthermore, our fabrication method enables the introduction of ERV that is several times larger than the maximum ERV demonstrated previously. As an example, we fabricate a rectangular SNAP resonator and investigate its group delay characteristics. Our experimental results are in good agreement with theoretical simulations. Overall, the developed approach allows us to reduce the axial scale of SNAP structures by an order of magnitude.

Discovery of parabolic microresonators produced via fiber tapering.

We demonstrate a new method for the creation of surface nanoscale axial photonics (SNAP) microresonators with harmonic profiles via fiber tapering in a laser-heated microfurnace. This simple procedure makes microresonators that support hundreds of axial modes with good spacing uniformity, yielding a promising prospective method for fabricating miniature frequency comb generators and dispersionless delay lines.

Tunable SNAP microresonators via internal ohmic heating.

We demonstrate a thermally tunable surface nanoscale axial photonics (SNAP) platform. Stable tuning is achieved by heating a SNAP structure fabricated on the surface of a silica capillary with a metal wire positioned inside. Heating a SNAP microresonator with a uniform wire introduces uniform variation of its effective radius which results in constant shift of its resonance wavelengths. Heating with a nonuniform wire allows local nanoscale variation of the capillary effective radius, which enables differential tuning of the spectrum of SNAP structures, as well as the creation of temporary SNAP microresonators that exist only when current is applied. As an example, we fabricate two bottle microresonators coupled to each other and demonstrate differential tuning of their resonance wavelengths into and out of degeneracy with precision better than 0.2 pm. The developed approach is beneficial for ultra-precise fabrication of tunable ultralow loss parity-time symmetric, optomechanical, and cavity quantum electrodynamics (QED) devices.