Tuning Optical Properties of Plasmonic Aerosols through Ligand-Solvent Interactions.

Plasmonic nanoparticles are highly tunable light-harvesting materials with a wide array of applications in photonics and catalysis. More recently, there has been interest in using aerosolized plasmonic nanoparticles for cloud formation, airborne photocatalysts, and molecular sensors, all of which take advantage of the large scattering cross sections and the ability of these particles to support intense local field enhancement ("hot spots"). While extensive research has investigated properties of plasmonic particles in the solution phase, surfaces, and films, aerosolized plasmonics are relatively unexplored. Here, we demonstrate how the capping ligand, suspension solvent, and atomization conditions used for aerosol generation control the steady-state optical properties of aerosolized Silica@Au plasmonic nanoshells. Our experimental results, supported with spectral simulations, illustrate that ligand coverage and atomization conditions control the degree of solvent retention and thus the spectral characteristics and potential access to surfaces for catalysis in the aerosol phase, opening a new regime for tunable applications of plasmonic metamaterials.

The low-lying electronic states and ultrafast relaxation dynamics of the monomers and J-aggregates of meso-tetrakis (4-sulfonatophenyl)-porphyrins.

The electronic and vibrational spectra of the meso-tetrakis(4-sulfonatophenyl)-porphyrins (TSPP) have been studied computationally using the PFD-3B functional with time-dependent density functional theory for the excited states. The calculated UV-vis absorption and emission spectra in aqueous solution are in excellent agreement with the experimental measurements of both H2TSPP-4 (monomer) at high pH and H4TSPP-2 (forming J-aggregate) at low pH. Moreover, our calculations reveal an infrared absorption at 1900 cm-1 in the singlet and triplet excited states that is absent in the ground state, which is chosen as a probe for transient IR absorption spectroscopy to investigate the vibrational dynamics of the excited state. Specifically, the S2 to S1 excited state internal conversion process time, the S1 state vibrational relaxation time, and the lifetime of the S1 excited electronic state are all quantitatively deduced.

Interface Catalysts of Ni3Fe1 Layered Double Hydroxide and Titanium Carbide for High-Performance Water Oxidation in Alkaline and Natural Conditions.

The electrocatalytic oxygen evolution reaction (OER) is important for many renewable energy technologies. Developing cost-effective electrocatalysts with high performance remains a great challenge. Here, we successfully demonstrate our novel interface catalyst comprised of Ni3Fe1-based layered double hydroxides (Ni3Fe1-LDH) vertically immobilized on a two-dimensional MXene (Ti3C2Tx) surface. The Ni3Fe1-LDH/Ti3C2Tx yielded an anodic OER current of 100 mA cm-2 at 0.28 V versus reversible hydrogen electrode (RHE), nearly 74 times lower than that of the pristine Ni3Fe1-LDH. Furthermore, the Ni3Fe1-LDH/Ti3C2Tx catalyst requires an overpotential of only 0.31 V versus RHE to deliver an industrial-level current density as high as 1000 mA cm-2. Such excellent OER activity was attributed to the synergistic interface effect between Ni3Fe1-LDH and Ti3C2Tx. Density functional theory (DFT) results further reveal that the Ti3C2Tx support can efficiently accelerate the electron extraction from Ni3Fe1-LDH and tailor the electronic structure of catalytic sites, resulting in enhanced OER performance.

Quantitative Modeling of Electron Dynamics and the Effect of Diffusion in Photosensitized Semiconductor Nanocomposites.

Photosensitized semiconducting nanomaterials have received considerable attention because of their applications in photocatalytic and photoelectronic devices. In such systems, photoexcited electrons with sufficiently high energies can be injected into the conduction band (CB) of an adjacent semiconductor. These excited electrons are subjected to various physical processes that can lead to their annihilation before exercising their catalytic/electric functions, and the efficiency of the photosensitized functions depends on the quantity of CB electrons produced and how long they remain near the surface region of the semiconductor. The rise and decay of photoexcited electrons in the semiconductor CB can be probed with transient IR absorption (TA), which was first demonstrated by Lian and co-workers. Results from various laboratories have since revealed that electrons appear in the CB following the excitation of the photosensitizer in tens to hundreds of femtoseconds and that the decay of the CB electrons typically exhibits multiple exponentials on varying ultrafast time scales. The size of the semiconductor nanoparticle appears to influence the diffusion of the CB electrons and thus their lifetimes. In all studies reported, the observed multiexponential decays have been analyzed and interpreted using purely phenomenological models, in which the individual decays were intuitively assigned to one specific relaxation or loss process. In reality, however, each exponential decay can be a convolution of multiple physical processes. In this Account, we report a universally applicable physical model, constructed by including all known electron dynamic processes, to quantitatively account for the multiexponential decays. We characterize the model as universal, as it can be used to analyze our own TA measurements, as well as data acquired in other laboratories. In our study of TiO2 nanorods photosensitized by Ag platelets, we demonstrate that each of the observed triple-exponential decays corresponds to a convolution of several physical decay processes occurring on similar time scales. The rate of each of the processes can be deconvoluted and determined to construct a complete, physically based model to assess the most important question: How many CB electrons are near the semiconductor surface region and what is their lifetime?The size of the semiconductor is an important consideration. Intuitively, as the semiconductor volume increases, there is more room for CB electrons to diffuse around, which increases their lifetime as annihilation occurs primarily at the surface. Indeed, Tachiya and co-workers previously reported that this lifetime increases with particle size. Nevertheless, while CB electrons live longer in the bulk of the particle, they are only useful when they are at the surface. Overall, what really matters is the CB electrons near the surface region, where the photosensitized functions actually occur. In applying our model to analyze the previously reported size-dependent Au/TiO2 results, we successfully reproduced the observation that larger semiconductor nanoparticles lengthen the lifetime of CB electrons because of diffusion into the bulk. More importantly, however, our model reveals that the size of the semiconductor has almost no influence on the retention of CB electrons near the semiconductor surface. This information is only revealed when all physical processes are quantitatively taken into account for the observed electron dynamics, which is not feasible with a phenomenological approach.

Ag nanoplatelets as efficient photosensitizers for TiO2 nanorods.

The lifetime for injecting hot electrons generated in Ag nanoplatelets to nearby TiO2 nanorods was measured with ultrafast transient IR absorption to be 13.1 ± 1.5 fs, which is comparable to values previously reported for much smaller spherical Ag nanoparticles. Although it was shown that the injection rate decreases as the particle size increases, this observation can be explained by the facts that (1) the platelet has a much larger surface to bulk ratio and (2) the platelet affords a much larger surface area for direct contact with the semiconductor. These two factors facilitate strong Ag-TiO2 coupling (as indicated by the observed broadened surface plasmon resonance band of Ag) and can explain why Ag nanoplatelets have been found to be more efficient than much smaller Ag nanoparticles as photosensitizers for photocatalytic functions. The fast injection rate, together with a stronger optical absorption in comparison with Au and dye molecules, make Ag nanoplatelets a preferred photosensitizer for wide bandgap semiconductors.

Mechanically tunable, human mesenchymal stem cell viable poly(ethylene glycol)-oxime hydrogels with invariant precursor composition, concentration, and stoichiometry.

Hydrogels are used widely for exploratory tissue engineering studies. However, currently no hydrogel systems have been reported that exhibit a wide range of elastic modulus without changing precursor concentration, identity, or stoichiometry. Herein, ester and amide-based PEG-oxime hydrogels with tunable moduli (~5-30 kPa) were synthesized with identical precursor mass fraction, stoichiometry, and concentration by varying the pH and buffer concentration of the gelation solution, exploiting the kinetics of oxime bond formation. The observed modulus range can be attributed to increasing amounts of network defects in slower forming gels, as confirmed by equilibrium swelling and small angle neutron scattering (SANS) experiments. Finally, hMSC viability was confirmed in these materials in a 24 h assay. While only an initial demonstration of the potential utility, the controlled variation in defect density and modulus is an important step forward in isolating system variables for hypothesis-driven biological investigations.

Zwitterionic amino acid-based Poly(ester urea)s suppress adhesion formation in a rat intra-abdominal cecal abrasion model.

Hernia repair outcomes have improved with more robust material options for surgeons and optimized surgical techniques. However, ventral hernia repairs remain challenging with an inherent risk of post-surgical adhesions in the peritoneal space which can occur regardless of interventional material or its surgical placement. Herein, amino acid-based poly(ester urea)s (PEUs) with varied amount of an allyl ether side chains were modified post polymerization modification with the zwitterionic sulfnate group (3-((3-((3-mercaptopropanoyl)oxy)propyl) dimethylammonio)propane-1-sulfonate) to promote anti-adhesive properties. These alloc-PEUs were processed using roll-to-roll fabrication methods to afford films that were amenable to surface functionalization via a zwitterion-thiol. Functional group availability on the surface was confirmed via fluorescence microscopy, x-ray photoelectron spectroscopy (XPS), and quartz crystal microbalance (QCM) measurements. Zwitterionic treated PEUs exhibited reduced fibrinogen adsorption in vitro when compared to unfunctionalized control polymer. A rat intrabdominal cecal abrasion adhesion model was used to assess the extent and tenacity of adhesion formation in the presence of the PEUs. The 10% alloc-PEU zwitterion functionalized material was found to reduce the extent and tenacity of adhesions when compared to adhesion controls and the unfunctionalized PEU controls.

Amino acid-based Poly(ester urea) copolymer films for hernia-repair applications.

The use of degradable materials is required to address current performance and functionality shortcomings from biologically-derived tissues and non-resorbable synthetic materials used for hernia mesh repair applications. Herein a series of degradable l-valine-co-l-phenylalanine poly(ester urea) (PEU) copolymers were investigated for soft-tissue repair. Poly[(1-VAL-8)0.7-co-(1-PHE-6)0.3] showed the highest uniaxial mechanical properties (332.5 ±â€¯3.5 MPa). Additionally, l-valine-co-l-phenylalanine poly(ester urea)s were blade coated on small intestine submucosa extracellular matrix (SIS-ECM) and found to enhance the burst test mechanical properties of SIS-ECM in composite films (force at break between 102.6 ±â€¯6.5-151.4 ±â€¯11.3 N). Free standing films of l-valine-co-l-phenylalanine PEUs were found to have superior extension at break when compared to SIS-ECM (averages between 1.2 and 1.9 cm and 1.2 cm respectively). Fibroblast (L-929) spreading, proliferation, and improved attachment over control were observed without toxicity in vitro, while a reduced inflammatory response at both 7 and 14 days post-implant was observed for poly[(1-VAL-8)⁠0.7-co-(1-PHE-6)⁠0.3] when compared to polypropylene in an in vivo rat hernia model. These results support the use of PEU copolymers as free-standing films or as composite materials in soft-tissue applications for hernia-repair.

Post-fabrication QAC-functionalized thermoplastic polyurethane for contact-killing catheter applications.

The use of catheters is ubiquitous in medicine and the incidence of infection remains unacceptably high despite numerous advances in functional surfaces and drug elution. Herein we report the use of a thermoplastic polyurethane containing an allyl ether side-chain functionality (allyl-TPU) that allows for rapid and convenient surface modification with antimicrobial reagents, post-processing. This post-processing functionalization affords the ability to target appropriate TPU properties and maintain the functional groups on the surface of the device where they do not affect bulk properties. A series of quaternary ammonium thiol compounds (Qx-SH) possessing various hydrocarbon tail lengths (8-14 carbons) were synthesized and attached to the surface using thiol-ene "click" chemistry. A quantitative assessment of the amount of Qx-SH available on the surface was determined using fluorescence spectroscopy and X-ray photoelectron spectroscopy (XPS). Contact-killing assays note the Q8-SH composition has the highest antimicrobial activity, and a live/dead fluorescence assay reveals rapid contact-killing of Staphylococcus aureus (>75% in 5 min) and Escherichia coli (90% in 10 min) inocula. Scale-up and extrusion of allyl-TPU provides catheter prototypes for biofilm formation testing with Pseudomonas aeruginosa, and surface-functionalized catheters modified with Q8-SH demonstrate their ability to reduce biofilm formation.

Antimicrobial and Antifouling Strategies for Polymeric Medical Devices.

Hospital-acquired infections arising from implanted polymeric medical devices continue to pose a significant challenge for medical professionals and patients. Often times, these infections arise from biofilm accumulation on the device, which is difficult to eradicate and usually requires antibiotic treatment and device removal. In response, significant efforts have been made to design functional polymeric devices or coatings that possess antimicrobial or antifouling properties that limit biofilm formation and subsequent infection by inhibiting or eliminating bacteria near the device surface or by limiting the initial attachment of proteins and bacteria. In this Viewpoint, we highlight the magnitude of device-associated infections, the role of biofilm formation in human pathogenesis, and recent advances in antimicrobial and antifouling polymers, as well as current strategies employed in commercial devices for preventing infection.

Control of Mesh Size and Modulus by Kinetically Dependent Cross-Linking in Hydrogels.

Kinetically controlled cross-linking processes produce mechanically distinguishable hydrogels using identical precursor chemistry. The oxime ligation demonstrates tunable reaction kinetics with pH and buffer strength, which induce changes in the structural features of hydrogels and determine their mechanical properties. Small-angle neutron scattering and swelling studies provide an insight into how structural properties correlate with mechanical properties for this hydrogel system.

Coherent plasmon-exciton coupling in silver platelet-J-aggregate nanocomposites.

Hybrid nanostructures that couple plasmon and exciton resonances generate hybridized energy states, called plexcitons, which may result in unusual light-matter interactions. We report the formation of a transparency dip in the visible spectra of colloidal suspensions containing silver nanoplatelets and a cyanine dye, 1,1'-diethyl-2,2'-cyanine iodide (PIC). PIC was electrostatically adsorbed onto the surface of silver nanoplatelet core particles, forming an outer J-aggregate shell. This core-shell architecture provided a framework for coupling the plasmon resonance of the silver nanoplatelet core with the exciton resonance of the J-aggregate shell. The sizes and aspect ratios of the silver nanoplatelets were controlled to ensure the overlap of the plasmon and exciton resonances. As a measure of the plasmon-exciton coupling strength in the system, the experimentally observed transparency dips correspond to a Rabi splitting energy of 207 meV, among the highest reported for colloidal nanoparticles. The optical properties of the silver platelet-J-aggregate nanocomposites were supported numerically and analytically by the boundary-element method and temporal coupled-mode theory, respectively. Our theoretical predictions and experimental results confirm the presence of a transparency dip for the silver nanoplatelet core J-aggregate shell structures. Additionally, the numerical and analytical calculations indicate that the observed transparencies are dominated by the coupling of absorptive resonances, as opposed to the coupling of scattering resonances. Hence, we describe the suppressed extinction in this study as an induced transparency rather than a Fano resonance.