RESUMO
Dielectric elastomer generator (DEG), which consists of a dielectric elastomer (DE) film sandwiched between two flexible electrodes (FEs), has the advantages of lightweight, high energy density, and high energy conversion efficiency, providing a simple and feasible solution for harvesting energy from human motion or nature. As crucial constituents of DEG, FEs are expected to possess excellent conductivity and compliance. Nevertheless, there is currently no quantitative characterization method for FE compliance. In addition, the impact mechanism of FE compliance on the energy harvesting performance and fatigue life of the DEG remains unclear. In this study, the dynamic mechanical property (DMP) was used to assess the compliance of FEs, and the quantitative characterization method of FE compliance was proposed. A series of silicone rubber electrodes (SREs) with different DMPs and compliance were designed and prepared, and the impact mechanism of FE compliance on the energy harvesting stability and fatigue life of the DEG was investigated. The results indicate that the key to achieving excellent FE compliance lies in reducing the difference in the magnitude of the complex modulus and phase angle between the FEs and DE, which can significantly reduce interfacial friction and extend the fatigue life of DEG. Benefiting from the enhanced FE compliance, the fatigue life and full-life energy density of the DEG device increase by 20.3 times and 26.4 times, respectively, compared with those of the commonly used carbon-based electrodes.
RESUMO
Dielectric elastomer transducers (DETs), with a dielectric elastomer (DE) film sandwiched between two compliant electrodes, are highly sought after in the fields of soft robotics, energy harvesting, and human-machine interaction. To achieve a high-performance DET, it is essential to develop electrodes with high conductivity, strain-insensitive resistance, and adaptability. Herein, we design an electrode (Supra-LMNs) based on multiple dynamic bond cross-linked supramolecular networks (Ns) and liquid metal (LM), which realizes high conductivity (up to 16,000 S cm-1), negligible resistance changes at high strain (1.3-fold increase at 1000% strain), instantaneous self-healability at ambient temperature, and rapid recycling. The conductive pathway can be activated through simple friction by transmitting stress through the silver nanowires (AgNWs) and cross-linking sites of LM particles. This method is especially attractive for printing circuits on flexible substrates, especially DE films. Utilized as dielectric elastomer generator (DEG) electrodes, it reduces the charge loss by 3 orders of magnitude and achieves high generating energy density and energy conversion efficiency on a low-resistance load. Additionally, serving as sensor (DES) and actuator (DEA) electrodes, it enables a highly sensitive sensing capability and complex interaction.
