RESUMO
Landfill leachate forms when waste-inherent water and percolated rainfall transfer are highly toxic, corrosive, acidic, and full of environmental pollutants. The release of leachate from municipal solid waste (MSW) landfill sites poses a severe hazard to human health and aquatic life. This study examined the impact of leachate from Delhi's Ghazipur landfill on the nearby groundwater quality. Analysis of leachate samples was done to determine various parameters such as total dissolved solids (TDS), hardness, alkalinity, electrical conductivity, pH, BOD5, COD, nitrate, sulphate, chloride and iron, and presence of coliform bacteria. Significant dissolved elements (22,690-34,525 mg/L) were observed in the samples, indicated by the high conductivity value (1156-1405 mho/cm). However, a stable pH range (6.90-7.80) of leachate samples was observed due to high alkalinity concentrations between 2123 and 3256 mg/L. The inverse distance weighing (IDW) interpolation tool from QGIS 3.22.7 developed spatial interpolated models for each parameter across the Ghazipur area. The IDW interpolated graphs of various parameters over the whole study area confirmed these contaminations. In addition, leachate and groundwater samples were physio-chemically analyzed, and temporal fluctuation in landfill waste has also been studied. The temporal fluctuation results showed that when heat is produced, transmitted, and lost throughout the waste system, the maximum temperature position fluctuates over time. The findings of this study highlight the critical importance of landfill management in reducing groundwater contamination from MSW leachate.
RESUMO
Implementing unified municipal solid waste management (MSWM) is often difficult due to socio-economic variables. However, spatial GIS models and statistical analysis of solid waste characterized by the weekdays, weekends, and festivals can somewhat mitigate the variance and assist with selecting suitable waste management methods. This paper presents the example of Rajouri, India, to propose a suitable MSWM based on Inverse Distance Weighted (IDW) intensity maps and statistical findings. The considered region was divided into different sample sites based on the local population density, and Municipal Solid Waste (MSW) was collected from four locations in each site on weekdays, weekends, and festivals. Compositional analysis of the MSW was then used to generate spatial IDW models in QGIS 3.22.7 to interpolate MSW generation over the entire area. Finally, statistical analysis was conducted to gain insight into the waste generation and accumulation trends. The results show that Rajouri produces 245 tonnes of waste daily (per capita: 0.382 kg/day) with a large organic fraction compared to other waste categories. Besides, waste generation is observed to increase over weekends and festivals due to increased consumption of material goods. Composting could serve as a vector for municipal solid waste because of its increased organic component and cost constraints. However, further research on the potential segregation techniques for the organic fraction of solid waste is needed.
