Antifungal potential of essential oils from different botanical sources against Penicillium digitatum: chemical composition and antifungal mechanisms of action by direct contact and volatile.

Fungal deterioration is a recurring problem in citrus fruits, and the search for natural preservatives has been widely publicised. Therefore, the in vitro antifungal activity of clove, white thyme, tea tree, Eucalyptus citriodora, Eucalyptus staigeriana, green mandarin, sicilian lemon, sweet orange, and bergamot essential oils (EO's) was evaluated against the mycelial growth of Penicillium digitatum isolated from contaminated citrus fruits, by direct contact and volatiles action. In addition, the chemical composition and volatile compounds of the EO's were evaluated by gas chromatography. Clove, white thyme, and Eucalyptus citriodora EO's inhibited 100% of the mycelial growth of P. digitatum by direct contact and volatile action at concentrations ≤ 2 µL/mL. On the other hand, EO's from citrus sources could not inhibit 100% of mycelial growth by any mechanism of action. Thus, the clove, thyme, and Eucalyptus citriodora EO's are promising for developing new ecologically correct products for controlling phytopathogens in citrus fruits.

Chemical Composition, Antimicrobial and Antioxidant Activities of Broccoli, Kale, and Cauliflower Extracts.

The brassicas have the potential to prevent chronic non-communicable diseases and it is proposed to evaluate the chemical composition, antioxidant and antimicrobial potential of broccoli, cabbage and extracts. The extracts were prepared and characterized and the antioxidant potential was evaluated against three radicals while the antimicrobial potential was analyzed using three techniques against four bacteria. The extracts have glucosinolates and phenolic compounds in their composition, and effectively inhibit the 2,2-diphenyl-1-picrylhydrazyl radical. The extracts of broccoli and cauliflower showed an inhibitory effect against hydroxyl radicals and nitric oxide. Disk diffusion showed that broccoli and cauliflower extract were active against three bacteria, while kale extract showed active halos for Gram-negative bacteria. Kale extract had an inhibitory effect Gram-positive bacteria, cauliflower extract inhibited the growth of Staphylococcus aureus. The cauliflower extract thus had a higher concentration of phenols, a strong antioxidant activity and promising results at a concentration of 100 mg/mL against S. aureus.

Bioactive aerogels based on native and phosphorylated potato (Solanum tuberosum L.) starches incorporated with star fruit extract (Averrhoa carambola L.).

The aim of this study was to develop a star fruit extract (SFE) and incorporate it into aerogels based on native and phosphorylated potato starches. The phosphorylation of starch enhances its properties by incorporating phosphate groups that increase the spaces between starch molecules, resulting in a more resilient, intact aerogel with enhanced water absorption. The bioactive aerogels based on potato starch and 10, 15, and 20 % (w/w) of SFE were characterized by their morphological and thermogravimetric properties, infrared spectra, water absorption capacity, loading capacity, and antioxidant activity. Epicatechin was the major compound present in SFE. The thermal stability of SFE increased when incorporated into phosphorylated starch aerogels at a concentration of 20 %. The water absorption capacity was higher in phosphorylated starch aerogels (reaching 1577 %) than in their native counterparts (reaching 1100 %). Native starch aerogels with 15 and 20 % SFE exhibited higher antioxidant activity against hydroxyl free radicals compared to phosphorylated starch aerogels, achieving 79.9 % and 86.4 % inhibition for the hydroxyl and nitric oxide radicals, respectively. The ideal choice of freeze-dried aerogel depends on the desired effect, either to act as an antioxidant agent by releasing bioactive compounds from SFE or as a water-absorbent agent in food products.

Cassava starch esterification with formic acid for fabrication of electrospun fibers.

Formic acid is utilized to induce esterification and chemical gelatinization in starch, particularly in the fabrication of electrospun fibers for nanomaterial production. This study investigated the impact of different concentrations (15, 20, 25, and 30 %) of cassava starch and formic acid as a solvent on the characteristics of the resultant polymeric solutions and electrospun fibers. Morphology, size distribution, thermogravimetric properties, diffraction patterns, and relative crystallinity were evaluated for the electrospun fibers. The amylose content of starch varied from 16.5 to 23.7 %, decreasing with esterification, achieving a degree of substitution of approximately 0.93. The solution-rheology exhibited elastic behavior, with viscosity increasing as starch concentration increased, hindering the fabrication of fibers at 25 and 30 % starch. Successful electrospun fibers were formed using 15 % and 20 % starch, displaying homogeneous morphologies with mean diameters of 165 nm and 301 nm, respectively. Esterification influenced thermogravimetric properties, leading to fibers with reduced degradation temperatures and mass loss compared to native starches. The electrospun fibers presented an amorphous structure, indicating a drastic reduction in relative crystallinity from 35.2 % in native starch to 8.5 % for esterified starches. This study highlights the intricate relationship between starch concentration, esterification, and solution viscosity, affecting the electrospinnability and properties of starch-polymeric solutions.

Electrospun nanofibers based on zein and red onion bulb extract (Allium cepa, L.): Volatile compounds, hydrophilicity, and antioxidant activity.

Onion is rich in bioactive and volatile compounds with antioxidant activity. However, the pungent odor of volatile compounds (VOCs) released restricts its use. The encapsulation of red onion extract by electrospinning is an alternative to mask this odor and protect its bioactive compounds. The main objective of this study was to encapsulate red onion bulb extract (ROE) in different concentrations into zein nanofibers by electrospinning and evaluate their thermal, antioxidant, and hydrophilicity properties. The major VOC in ROE was 3(2H)-furanone, 2-hexyl-5-methyl. Incorporating ROE into the polymeric solutions increased electrical conductivity and decreased apparent viscosity, rendering nanofibers with a lower average diameter. The loading capacity of ROE on fibers was high, reaching 91.5% (10% ROE). The morphology of the nanofibers was random and continuous; however, it showed beads at the highest ROE concentration (40%). The addition of ROE to the nanofibers increased their hydrophilicity. The nanofibers' antioxidant activity against 2,2-diphenyl-1-picrylhydrazyl, nitric oxide, and hydroxyl radicals ranged from 32.5% to 57.3%. The electrospun nanofibers have the potential to protect and mask VOCs. In addition, they offer a sustainable alternative to the synthetic antioxidants commonly employed in the food and packaging industry due to their antioxidant activities.

Natural fermentation of potato (Solanum tuberosum L.) starch: Effect of cultivar, amylose content, and drying method on expansion, chemical and morphological properties.

Natural fermentation with sun-drying is a modification that promotes the expansion capacity of starch, and its effects on potato starch have not been reported so far. The aim of this study was to evaluate the effects of the amylose content of potato (Solanum tuberosum L.) starches and natural fermentation followed by oven or sun drying on its properties. Cassava starch was also used a control. Native and fermented starches were evaluated based on their chemical composition, amylose, carboxyl and carbonyl content as well as their thermal, pasty, and morphological properties. The fermentation water was evaluated by pH and titratable acidity to control the process. Puffed balls were prepared to evaluate expandability, mass loss, porosity and texture. The fermentation intensity was greater for potato and cassava starch with low-amylose content than for potato starch with higher amylose content. In addition, the acidity of the fermentation water increased faster with cassava starch than with potato starches. The fermented potato starches with the highest amylose content had low acidity and low expansion capacity compared to the fermented potato and cassava starches with low-amylose content. Fermentation and sun-drying of low-amylose potato and cassava starches increased the expansion and reduced the hardness of the puffed balls.

Applications of propolis encapsulation in food products.

Propolis has beneficial health properties attributed to of phenolic compounds. However, its application is limited. Thus, encapsulation protects the bioactive compounds of propolis from degradation, allowing their release under controlled and specific conditions and increasing their solubility. In addition to protecting flavonoids, encapsulation also minimises the undesirable characteristics of propolis, such as strong odour. We brought attention to the high antioxidant and antimicrobial activities of encapsulated propolis, and its maintained biological activity enables more uses in different areas. Encapsulated propolis can be applied in food products as an ingredient. This review describes recent advances in improving the bioactivity of propolis extracts by using encapsulation techniques, and biopolymer research strategies, focusing on applications in food products. Encapsulated propolis has a promising market perspective due to the industrial and scientific-technological advancement, the increase in the amount of research, the improvement of propolis extraction techniques, and the need of consumers for innovative products.

Absorbent bioactive aerogels based on germinated wheat starch and grape skin extract.

This study aimed to produce water-absorbent bioactive aerogels using biodegradable raw materials, wheat starch and poly ethylene oxide (PEO), and derived from agro-industrial residues (grape skin) obtained in the wine industry. The aerogels were produced using germinated wheat starch (GWS), with and without PEO, and incorporating grape skin extract (GSE) at concentrations of 5 and 10 % (w/w). The GSE was evaluated for total and individual phenolic compounds, anthocyanins, and antioxidant activity. The starch aerogels were characterized for morphology, density, porosity, functional groups by FT-IR, relative crystallinity and diffraction pattern, water absorption capacity, antioxidant activity, and in vitro release profile of phenolic compounds in food simulant medium. The total phenolic compounds in GSE was 226.25 ± 0.01 mg equivalent of gallic acid/g GSE. The aerogels showed low density and high porosity. All aerogels demonstrated high water absorption capacity (581.4 to 997.5 %). The antioxidant activity of the aerogels increased with increasing GSE concentration and the addition of PEO. The aerogels could release GSE gradually for up to 120 days in the hydrophilic simulant medium and 240 h for the hydrophobic medium. Starch-based aerogels with GSE showed potential to be applied as exudate absorbers with antioxidant activity to develop active food packaging.

Oleogels based on germinated and non-germinated wheat starches and orange essential oil: Application as a hydrogenated vegetable fat replacement in bread.

This study aimed to produce oleogels based on non-germinated and germinated wheat starches with orange essential oil, apply them to replace hydrogenated vegetable fat in bread, and assess the antifungal action. The oleogels were prepared using sunflower oil, wheat starches, beeswax, water, and orange essential oil (OEO). They were evaluated to determine the volatile compounds, oil binding capacity, texture profile, storage stability for 20 days, thermogravimetric analysis, and functional groups. The breads were evaluated by their moisture content, specific volume, texture profile, volatile compounds, and microbiological contamination during 15 days of storage. The oleogels showed high storage stability, were fully intact after 20 days of storage, and had a high oil binding capacity (∼100 %). The oleogels with OEO presented increased adhesiveness and reduced hardness compared to the ones without essential oil. The oleogels with OEO based on germinated wheat starch released a high amount of volatile compounds. Substituting saturated vegetable fat with oleogels in bread formulation resulted in decreased hardness and maintained specific volume. Furthermore, incorporating OEO oleogels in the bread led to reduced growth of total mesophiles and fungi.

Pinhão coat extract encapsulated in starch ultrafine fibers: Thermal, antioxidant, and antimicrobial properties and in vitro biological digestion.

This study aimed to produce soluble potato starch ultrafine fibers for the encapsulation of pinhão coat extract (PCE), evaluating their relative crystallinity (RC), thermal stability, antioxidant activity, antimicrobial activity against Escherichia coli and Staphylococcus aureus, as well as in vitro biological digestion. In the simulation of in vitro biological digestion, the phenolic compounds release profile was also evaluated. The ultrafine fibers were produced by electrospinning, based on a polymeric solution composed of soluble potato starch (50% w/v) and formic acid. Then, PCE was incorporated at various concentrations (0.5%, 1.0%, and 1.5%, w/w, dry basis). The endothermic event of free PCE was not observed in the ultrafine fibers, which suggests its encapsulation. The RC decreased according to the increase in PCE concentration in the ultrafine fibers. The PCE resisted thermal treatments when encapsulated into the ultrafine fibers (100 and 180°C), and the ultrafine fibers with 1% PCE presented the highest amount of preserved phenolic compounds. Regarding antioxidant activity, the free PCE presented 85% of DPPH inhibition and the ultrafine fibers had 18% inhibition, not differing among the PCE concentrations (p < 0.05). The free PCE and the ultrafine fibers with 0.5% PCE showed inhibitory effect against S. aureus and the ones with 1.5% PCE showed controlled release of phenolic compounds during the simulation of in vitro digestion. Starch ultrafine fibers showed potential to be applied in food industries due to their capacity of protecting phenolic compounds when submitted to high temperatures or gastrointestinal conditions. Nevertheless, their application depends on the end use of the product. PRACTICAL APPLICATION: The encapsulation of pinhão coat extract (PCE) in ultrafine starch fibers promotes greater preservation of phenolic compounds. Thus, it can be incorporated into different foods that are produced using the ultra-high temperature (UHT) process-at 135-145°C for 5 to 10 s, or some other equivalent time/temperature combination. Another possibility is the incorporation of ultrafine fibers in active packaging: compounds can migrate to food, improving sensory characteristics, increasing shelf life, preventing chemical and microbiological deterioration, and ensuring food safety.

Recovery of Bioactive Compounds from Jaboticaba Peels and Application into Zein Ultrafine Fibers Produced by Electrospinning.

This work focused on the recovery bioactive compounds from jaboticaba peels and to develop ultrafine fibers from zein incorporated with the jaboticaba extract by electrospinning technique. Jaboticaba peel extracts (JPE) were obtained by maceration according a central composite rotational design (CCDR) and characterized with respect to total phenolic content (TP), antioxidant activity (AA) and total anthocyanin (TA). The optimal condition for the extraction was obtained using a desirability function in order to maximize the presence of bioactive compounds. Under these conditions the amount of cyanidin-3-glucoside (Cn-3-Glu) and the antimicrobial inhibition (AI) of E. coli were evaluated. Ultrafine fibers were obtained by electrospinning technique using zein in an aqueous ethanol as solvent and freeze-dried JPE at different concentrations (1.7% and 3.3%) to produce a composite membrane. The apparent viscosity and electrical conductivity of the polymer solutions, as well as the morphology, thermal stability and functional groups of the ultrafine fibers, were evaluated. The optimal conditions for extraction were 88 °C and pH 1. Under these conditions, a high amount of Cn-3-Glu was obtained (718.12 mg 100 g-1), along with 22.2% antimicrobial inhibition against E. coli. The addition of JPE into composite membranes did not affect the morphology of fibers, which presented a homogeneous and continuous format. Therefore, fibers containing JPE showed interesting characteristics for the food packaging industry.

Application of Films Based on Chitosan and Xanthan Gum in Refrigerated Fish Conservation

Abstract This research aims to determine the efficiency of chitosan and xanthan gum films in conservation of croaker fillets kept in refrigeration for 9 days. Proximal composition, loss of mass, color, pH, TVB-N (Total Volatile Bases) and microbiological profile were assessed. The films were prepared with chitosan and xanthan gum in varying mass proportions 100:0, m:m (C100XG0); 60:40, m:m (C60XG40); 50:50, m:m (C50XG50). They presented the respective values for moisture content, water solubility, thickness and water vapor permeability: 24.59%, 19.50%, 0.086 mm and 11.45gm-1.s-1.Pa-1for C100XG0; 24.58%; 20.27%, 0.091 mm and 10.41 gm-1.s-1.Pa-1for C60XG40; 22.11%, 22.06%, 0.089 mm and 10.68 gm-1.s-1.Pa-1 forC50XG50.The films were made in small bags format capable to hold about 20 g of fish fillets. A control sample was prepared in parallel, using polyethylene bags under the same storage conditions. The results showed that the chitosan films combined with xanthan gum had excellent antimicrobial properties, capable of preserving the quality of chilled fish fillets during the studied period, since it inhibited the growth of Staphylococcus coagulase-positive, Salmonella spp and coliforms at 45 ° C. Mass loss of the croaker fillets was not significantly affected by xanthan gum addition to the films. On the other hand, xanthan gum addition affected pH and color parameters of the corvina fillets. It was also verified that the combination of these two polymers promoted the reduction of N-BVT, being the C50XG50 film that presented the best response.

Thermal and irradiation resistance of folic acid encapsulated in zein ultrafine fibers or nanocapsules produced by electrospinning and electrospraying.

The objectives of this study were to characterize zein fibers and capsules prepared by electrospinning and electrospraying techniques, respectively, and then use them to encapsulate folic acid. Folic acid containing fibers and capsules (0.5, 1.0, and 1.5%, w/v) were submitted to thermal treatment (100, 140, and 180 °C) and ultraviolet A light (UVA) irradiation to evaluate the resistance of folic acid. Zein fibers and capsules containing folic acid showed high encapsulation efficiency (>80%). Unencapsulated folic acid showed a reduction in folic acid content from 17.17 µg/mL to 5.44 µg/mL (approximately 70%) when exposed to 180 °C. Photodegradation of unencapsulated folic acid lowered its concentration from 17.17 µg/mL to 12.58 µg/mL (~26% of reduction), when exposed for 1 h to UVA irradiation. However, folic acid concentration when encapsulated in fibers (1.5%) was maintained or only slightly reduced from 9.73 µg/mg to 8.88 µg/mg after thermal treatment at 180 °C. The capsules containing 1.5% of folic acid also presented a slight reduction in folic acid concentration from 8.84 µg/mg to 7.88 µg/mg when exposed to 24 h of UVA irradiation. Zein fibers and capsules containing folic acid present promising characteristics for application in foods that require thermal processing or exposure to irradiation.

Nano-scale polysaccharide materials in food and agricultural applications.

Potential applications of nanotechnology in food and agriculture include: (1) the encapsulation of functional compounds; (2) production of reinforcing materials; (3) delivery of nutraceuticals in foods; (4) food safety, for detection and control of chemical and microbiological risks; (5) active and intelligent food packaging; (6) incorporation of protective substances of seeds; (7) addition of nutrients in the soil; (8) use of controlled release pesticides. Natural polysaccharides and their derivatives are widely used in the production of nano-scale materials. This chapter examines, the use of polysaccharides, such as starch, cellulose, lignin, pectin, gums, and cyclodextrins for the production of nano-scale materials, including nanocrystals, nanoemulsions, nanocomplexes, nanocapsules, and nanofibers.

Characteristics of starch from different bean genotypes and its effect on biodegradable films.

BACKGROUND: Starches from four common bean genotypes were characterized and used in the production of biodegradable films. Starches were characterized by their swelling power, solubility, amylose content, granule morphology, relative crystallinity, thermal and pasting properties, and susceptibility to α-amylase hydrolysis. Films were characterized according to their morphology, mechanical and water vapor barrier properties, whiteness and opacity. RESULT: Depending on the common bean genotype, a great variation on starch properties was found, which, in turn, clearly impacted on the characteristics of the starch-based films. Starches from BRS Pitanga and BRS Pérola genotypes exhibited the highest amylose content and the lowest swelling capabilities. Bean starch from the IPR Uirapuru genotype presented granules with an irregular surface and shape. Starches from IPR Uirapuru and BRS Estilo genotypes provided well-structured biodegradable films, without the occurrence of fissures or cracks. Moreover, starch films containing starch from BRS Estilo genotype exhibited the highest flexibility, permeability and solubility. CONCLUSION: The morphological, mechanical and water vapor barrier properties of films elaborated with common bean starch vary greatly as a function of the bean genotype used for starch production. © 2018 Society of Chemical Industry.

Cellulose nanocrystals from rice and oat husks and their application in aerogels for food packaging.

This study describes the valorization of rice and oat husks by obtaining cellulose nanocrystals for the production of aerogels for food packaging applications. Commercial cellulose was used as a control sample. Nanocrystals from cellulose were obtained by enzymatic hydrolysis and mechanical treatment at high pressure. The morphology, particle size, functional groups, crystallinity, and thermal properties of the cellulose nanocrystals were analyzed. The morphology, functional groups, crystallinity, water absorption capability, and zeta potential of aerogels were also analyzed. Cellulose nanocrystals show different structural properties and crystallinity depending on the source of the cellulose. The average diameter of the nanocrystals varied from 16.0 to 28.8 nm. The aerogels prepared with cellulose nanocrystals showed a porous and uniform structure with a water absorption capacity between 264.2% and 402.8% at 25 °C. The aerogel of oat cellulose nanocrystals showed a larger pore size than that of eucalyptus cellulose nanocrystals, and this may have influenced the lowest water absorption capacity of the aerogels of eucalyptus cellulose nanocrystals. These results show that agroindustrial residues have promising applications in various industrial fields and could be used as aerogel absorbers of water in food packaging.

Immobilization of xylanase and xylanase-ß-cyclodextrin complex in polyvinyl alcohol via electrospinning improves enzyme activity at a wide pH and temperature range.

Xylanase (EC 3.2.1.8) is a key enzyme for degradation of xylan. A limitation of xylanase application in food and beverage industries is the low enzyme activity and stability at a wide pH and temperature range. In the present study, different levels of pure xylanase (XY) and xylanase-ß-cyclodextrin (XY-ß-CD) inclusion complex were immobilized in polyvinyl alcohol (PVA) via electrospinning. Morphological and structural characteristics of obtained fibers were investigated by Fourier-transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD) analyzes. Inclusion complex formation was evaluated by FTIR, XRD, and differential scanning calorimetry (DSC) analyzes. Obtained electrospun fibers showed a smooth surface with average diameter from around 200 to 600 nm. Greater diameters were observed at higher xylanase levels. In addition, inclusion complex provided thicker fibers than pure xylanase. Optimum xylanase activity changed from 60 to 70 °C when enzyme was immobilized in PVA. FTIR results suggest a more efficient enzyme conformation after immobilization. The greatest xylanase efficiency of immobilization was achieved at 0.5%-XY, with specific activity of 59.73 µM/min/mg of immobilized xylanase. Xylanase immobilized in PVA fibers exhibited higher activity at extremer pH conditions (4, 5, 7, and 8), as compared to free xylanase.

Action of ginger essential oil (Zingiber officinale) encapsulated in proteins ultrafine fibers on the antimicrobial control in situ.

The ultrafine fibers were produced using a polymeric blend of soy protein isolate (SPI), polyethylene oxide (PEO), and zein at a ratio of 1:1:1 (v/v/v) by electrospinning. The ginger essential oil (GEO) was encapsulated in the ultrafine fibers and the morphology, Fourier-Transform Infrared Spectroscopy (FTIR) analysis, thermal properties and relative crystallinity were evaluated. The antimicrobial activity of ginger essential oil was evaluated against five bacteria (Listeria monocytogenes, Staphylococcus aureus, Escherichia coli 0157:H7, Salmonella typhimurium, and Pseudomonas aeruginosa). Based on the preliminary tests, the concentration of GEO selected to add in the polymer solution was 12% (v/v; GEO/polymer solution). The fiber produced with 12% (v/v) GEO was used for antimicrobial analysis and in situ application (in fresh Minas cheese) against L. monocytogenes by micro-atmosphere. The ultrafine fibers produced, regardless the concentration of the essential oil, presented homogeneous morphology with cylindrical shape without the presence of beads. The application of the active fibers containing 12% GEO showed high potential to be applied in food packaging to reduce microbial contamination.

Ultrafine fibers of zein and anthocyanins as natural pH indicator.

BACKGROUND: pH-sensitive indicator membranes, which are useful for pharmaceutical, food, and packaging applications, can be formed by encapsulating halochromic compounds within various solid supports. Accordingly, electrospinning is a versatile technique for the development of these indicators, by entrapping pH dyes within ultrafine polymer fibers. RESULTS: The ultrafine zein fibers, containing 5% (w/v) anthocyanins, had an average diameter of 510 nm. The pH-sensitive membrane exhibited color changes from pink to green when exposed to acidic and alkaline buffers, respectively. The contact angle was negligible after 10 and 2 s for neat and 5% anthocyanin-loaded zein membranes, respectively. CONCLUSION: The pH membranes exhibited color changes in a board pH range, which can potentially be used in various active packaging applications. © 2017 Society of Chemical Industry.