In-depth characterization of particulate matter in a highly polluted urban environment at the foothills of Himalaya-Karakorum Region.

In recent years, the rising levels of atmospheric particulate matter (PM) have an impact on the earth's system, leading to undesirable consequences on various aspects like human health, visibility, and climate. The present work is carried out over an insufficiently studied but polluted urban area of Peshawar, which lies at the foothills of the famous Himalaya and Karakorum area, Northern Pakistan. The particulate matter with an aerodynamic diameter of less than 10 µm, i.e., PM10 are collected and analyzed for mineralogical, morphological, and chemical properties. Diverse techniques were used to examine the PM10 samples, for instance, Fourier transform infrared spectroscopy, x-ray diffraction, and scanning electron microscopy along with energy-dispersive x-ray spectroscopy, proton-induced x-ray emission, and an OC/EC carbon analyzer. The 24 h average PM10 mass concentration along with standard deviation was investigated to be 586.83 ± 217.70 µg/m3, which was around 13 times greater than the permissible limit of the world health organization (45 µg/m3) and 4 times the Pakistan national environmental quality standards for ambient PM10 (150 µg/m3). Minerals such as crystalline silicate, carbonate, asbestiform minerals, sulfate, and clay minerals were found using FTIR and XRD investigations. Microscopic examination revealed particles of various shapes, including angular, flaky, rod-like, crystalline, irregular, rounded, porous, chain, spherical, and agglomeration structures. This proved that the particles had geogenic, anthropogenic, and biological origins. The average value of organic carbon, elemental carbon, and total carbon is found to be 91.56 ± 43.17, 6.72 ± 1.99, and 102.41 ± 44.90 µg/m3, respectively. Water-soluble ions K+ and OC show a substantial association (R = 0.71). Prominent sources identified using Principle component analysis (PCA) are anthropogenic, crustal, industrial, and electronic combustion. This research paper identified the potential sources of PM10, which are vital for preparing an air quality management plan in the urban environment of Peshawar.

Characteristics and optical properties of atmospheric aerosols based on long-term AERONET investigations in an urban environment of Pakistan.

Radiative balance, local climate, and human health are all significantly influenced by aerosol. Recent severe air pollution over Lahore, a city in Pakistan calls for more thorough research to determine the negative impacts brought on by too many aerosols. To study regional aerosol characteristics and their differences from various aspects, in-depth and long-term (2007-2020) investigations of the columnar aerosol properties over the urban environment of Lahore were carried out by using AERONET data. The Aerosol Optical Depth (AOD400) and Angstrom Exponent (AE400-870) vary from low values of 0.10 to a maximum value of 4.51 and from 0.03 to 1.81, respectively. The huge differences in the amount of AOD440 as well as AE440-870 show the large fluctuation of aerosol classes because of various sources of their emission. During the autumn and winter seasons, the decreasing trend of the optical parameters of aerosols like Single Scattering Albedo (SSA) and Asymmetry Parameter (ASY) with increasing wavelength from 675 to 1020 nm indicates the dominance of light-absorbing aerosols (biomass burning (BB) and industrial/urban (UI). Due to the long-distance dust movement during spring, summer, and autumn, coarse mode particles predominated in Lahore during the study period. Dust type (DD) aerosols are found to be the dominant one during spring (46.92%), summer (54.31%), and autumn (57.46%) while urban industry (BB/UI) was dominant during the winter season (53.21%). During each season, the clean continental (CC) aerosols are found to be in negligible amounts, indicating terrible air quality in Lahore City. The present research work fills up the study gap in the optical properties of aerosols in Lahore and will help us understand more fully how local aerosol fluctuation affects regional climate change over the urban environment of Lahore.

Wintertime investigation of PM10 concentrations, sources, and relationship with different meteorological parameters.

Meteorological factors play a crucial role in affecting air quality in the urban environment. Peshawar is the capital city of the Khyber Pakhtunkhwa province in Pakistan and is a pollution hotspot. Sources of PM10 and the influence of meteorological factors on PM10 in this megacity have yet to be studied. The current study aims to investigate PM10 mass concentration levels and composition, identify PM10 sources, and quantify links between PM10 and various meteorological parameters like temperature, relative humidity (RH), wind speed (WS), and rainfall (RF) during the winter months from December 2017 to February 2018. PM10 mass concentrations vary from 180 - 1071 µg m-3, with a mean value of 586 ± 217 µg m-3. The highest concentration is observed in December, followed by January and February. The average values of the mass concentration of carbonaceous species (i.e., total carbon, organic carbon, and elemental carbon) are 102.41, 91.56, and 6.72 µgm-3, respectively. Water-soluble ions adhere to the following concentration order: Ca2+ > Na+ > K+ > NH4+ > Mg2+. Twenty-four elements (Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Co, Zn, Ga, Ge, As, Se, Kr, Ag, Pb, Cu, and Cd) are detected in the current study by PIXE analysis. Five sources based on Positive Matrix Factorization (PMF) modeling include industrial emissions, soil and re-suspended dust, household combustion, metallurgic industries, and vehicular emission. A positive relationship of PM10 with temperature and relative humidity is observed (r = 0.46 and r = 0.56, respectively). A negative correlation of PM10 is recorded with WS (r = - 0.27) and RF (r = - 0.46). This study's results motivate routine air quality monitoring owing to the high levels of pollution in this region. For this purpose, the establishment of air monitoring stations is highly suggested for both PM and meteorology. Air quality standards and legislation need to be revised and implemented. Moreover, the development of effective control strategies for air pollution is highly suggested.

Morphological, Mineralogical, and Biochemical Characteristics of Particulate Matter in Three Size Fractions (PM10, PM2.5, and PM1) in the Urban Environment.

Air pollution in megacities is increasing due to the dense population index, increasing vehicles, industries, and burning activities that negatively impact human health and climate. There is limited study of air pollution in many megacities of the world including Pakistan. Lahore is a megacity in Pakistan in which the continuous investigation of particulate matter is very important. Therefore, this study investigates particulate matter in three size fractions (PM1, PM2.5, and PM10) in Lahore, a polluted city in south Asia. The particulate matter was collected daily during the winter season of 2019. The average values of PM1, PM2.5, and PM10 were found to be 102.00 ± 64.03, 188.31 ± 49.21, and 279.73 ± 75.04 µg m-3, respectively. Various characterization techniques including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectroscopy (EDX) were used. FT-IR and XRD techniques identified the minerals and compounds like quartz, peroxides, calcites and vaterite, feldspar group, kaolinite clay minerals, chrysotile, vaterite, illite, hematite, dolomite, calcite, magnesium phosphate, ammonium sulfate, calcium iron oxide, gypsum, vermiculite, CuSO4, and FeSO4. Morphology and elemental composition indicated quartz, iron, biological particles, carbonate, and carbonaceous particles. In addition, various elements like C, O, B, Mg, Si, Ca, Cl, Al, Na, K, Zn, and S were identified. Based on the elemental composition and morphology, different particles along with their percentage were found like carbonaceous- (38%), biogenic- (14%), boron-rich particle- (14%), feldspar- (10%), quartz- (9%), calcium-rich particle- (5%), chlorine-rich particle- (5%), and iron-rich particle (5%)-based. The main sources of the particulate matter included vehicular exertion, biomass consumption, resuspended dust, biological emissions, activities from construction sites, and industrial emissions near the sampling area.

Fabrication of graphene oxide coated quartz filter paper for enhanced adsorption of particulate matter.

Airborne particulate matter has become an emerging issue globally due to environmental degradation and the health risk it causes. Volatilization of weakly adsorbed particles onto quartz filter paper (QFP) limits its performance. The adsorption of particulate matter (PM10) onto QFP coated with different concentrations of graphene oxide (GO) was investigated to enhance the adsorption potential. Hummer's method was adopted to synthesize GO. QFPs were coated with different concentrations of GO using a spin coating technique to optimize the result. The morphology and microstructure of GO-QFP were characterized by various experimental techniques, like XRD, FTIR, EDX, and SEM. GO showed considerable affinity to aerosol particles for GO-QFP weighing 5 mg/ml, whereas adsorption of the coated samples before and after was significantly reduced. The high affinity to aerosol particles was due to dominated π-π interactions and the grooved regions formed on the GO layer. It was considered that the high surface to volume ratio of GO-QFP improves the adsorptive property of the QF and consequently enhances the performance of the filter paper.

Temporal characteristics of aerosol optical properties over the glacier region of northern Pakistan.

Glacier melting due to light-absorbing aerosol has become a growing issue in recent decades. The emphasis of this study is to examine aerosol loadings over the high mountain glacier region of northern Pakistan between 2004 and 2016, with sources including local emissions and long-range transported pollution. Optical properties of aerosols were seasonally analyzed over the glacier region (35-36.5°N; 74.5-77.5°E) along with three selected sites (Gilgit, Skardu, and Diamar) based on the Ozone Monitoring Instrument (OMI). The aerosol sub-type profile was analyzed with Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO). Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model was used to understand the origin of air masses arriving in the study region. The highest values of aerosol optical depth (AOD) and single scattering albedo (SSA) occurred during spring, whereas aerosol index (AI) and absorption AOD (AAOD) exhibited maximum values in winter and summer, respectively. The minimum values of AOD, AI, AAOD, and SSA occurred in winter, autumn, winter, and autumn, respectively. The results revealed that in spring and summer the prominent aerosols were dust, whereas, in autumn and winter, anthropogenic aerosols were prominent. Trend analysis showed that AI, AOD, and AAOD increased at the rate of 0.005, 0.006, and 0.0001 yr-1, respectively, while SSA decreased at the rate of 0.0002 yr-1. This is suggestive of the enhancement in aerosol types over the region with time that accelerates melting of ice. CALIPSO data indicate that the regional aerosol was mostly comprised of sub-types categorized as dust, polluted dust, smoke, and clean continental. The types of aerosols defined by OMI were in good agreement with CALIPSO retrievals. Analysis of the National Oceanic and Atmospheric Administration Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model revealed that air parcels arriving at the glacier region stemmed from different source sites.

On the Morphology and Composition of Particulate Matter in an Urban Environment.

Particulate matter (PM) plays a vital role in altering air quality, human health, and climate change. There are sparse data relevant to PM characteristics in urban environments of the Middle East, including Peshawar city in Pakistan. This work reports on the morphology and composition of PM in two size fractions (PM2.5 and PM10) during November 2016 in Peshawar. The 24 hous mass concentration of PM2.5 varied from 72 µg m-3 to 500 µg m-3 with an average value of 286 µg m-3. The 24 hours PM10 concentration varied from 300 µg m-3 to 1440 µg m-3 with an average of 638 µg m-3. The morphology, size, and elemental composition of PM were measured using Fourier Transform Infra Red (FT-IR) Spectroscopy and Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray (EDX) Spectroscopy. The size of the analyzed particles by EDX ranged from 916 nm to 22 µm. Particles were classified into the following groups based on their elemental composition and morphology: silica (12%), aluminosilicates (23%), calcium rich (3%), chloride (2%), Fe/Ti oxides (3%), carbonaceous (49%), sulfate (5%), biogenic (3%). The major identified sources of PM are vehicular emissions, biomass burning, soil and re-suspended road dust, biological emissions, and construction activities in and around the vicinity of the sampling site.