Dogs ≥ five years of age at the time of congenital extrahepatic portosystemic shunt diagnosis have better long-term outcomes with surgical attenuation than with medical management alone.

OBJECTIVE: To determine the outcome in dogs diagnosed with congenital extrahepatic portosystemic shunts (EHPSS) at ≥ 5 years of age treated with medical management only (M) or with surgical attenuation (S). The hypothesis was that dogs undergoing surgical attenuation would have a longer survival time than dogs undergoing medical management only. ANIMALS: 351 dogs definitively diagnosed with EHPSS at ≥ 5 years of age. PROCEDURES: Medical records from 2009 to 2019 at 16 veterinary teaching hospitals were evaluated. Data collected included signalment, clinical signs at diagnosis, clinicopathologic data, surgical and medical treatments, shunt morphology, clinical signs and medical treatments at 6 to 12 months after diagnosis, and survival time. RESULTS: 351 dogs (M, 119 [33.9%]; S, 232 [66.1%]) were included in the study. Survival time was longer with surgery than medical management (hazard ratio, 4.2; M, 3.4 years; S, 10.9 years). Continued clinical signs at 6 to 12 months after diagnosis were more common with medical management (M, 40% [33/88]; S, 14% [21/155]). Continued medical treatments at 6 to 12 months after diagnosis were more common in the medical management group (M, 78% [69/88]; S, 34% [53/155]). Perioperative mortality rate was 7.3%. CLINICAL RELEVANCE: Dogs diagnosed at ≥ 5 years of age with EHPSS have significantly better survival times and fewer clinical signs with surgical attenuation, compared with medical management. Older dogs have similar surgical mortality rates to dogs of all ages after surgical EHPSS attenuation.

Soft Elastomeric Capacitor for Strain and Stress Monitoring on Sutured Skin Tissues.

Sutures are ubiquitous medical devices for wound closures in human and veterinary medicine, and suture techniques are frequently evaluated by comparing tensile strengths in ex vivo studies. Direct and nondestructive measurement of tensile force present in sutured biological skin tissue is a key challenge in biomechanical fields because of the unique and complex properties of each sutured skin specimen and the lack of compliant sensors capable of monitoring large levels of strain. The authors have recently proposed a soft elastomeric capacitor (SEC) sensor that consists of a highly compliant and scalable strain gauge capable of transducing geometric variations into a measurable change in capacitance. In this study, corrugated SECs are used to experimentally characterize the inherent biomechanical properties of canine skin specimens. In particular, an SEC corrugated with a re-entrant hexagonal honeycomb pattern is studied to monitor strain and stresses for three specific suture patterns: simple interrupted, cruciate, and intradermal patterns. Stress is estimated using constitutive models based on the Fractional Zener and the Kelvin-Voigt models, parametrized using a particle swarm algorithm from experimental data and results from a validated finite element model. Results are benchmarked against findings from the literature and show that SECs are valuable for clinical evaluation of tensile force in biological skins. It was found that both the ranking of suture pattern performance and the sutured skin's Young's modulus using the proposed approach agreed with data reported in the literature and that the estimated stress at the suture level closely matched that of an approximate finite element model.

Ex vivo mechanical testing of various suture patterns for use in tendon plating.

OBJECTIVE: To determine the influence of suture patterns on resistance to gap formation after tendon plating STUDY DESIGN: Ex vivo study SAMPLE POPULATION: Suspensory ligament and superficial and deep digital flexor tendons harvested from 16 neonatal cadaver foal limbs. METHODS: Each tendon/ligament from a given limb was randomly assigned to one of three treatment groups consisting of a 7-hole veterinary cuttable plate fixed with alternating simple interrupted, figure-8, or hybrid suture patterns. The constructs were distracted at a rate of 1.0 mm/s to failure, as determined by the formation of a 1 mm gap for initial failure and a 3 mm gap for ultimate failure. The mode of failure was also recorded. RESULTS: Constructs prepared with hybrid and figure-8 patterns sustained over 2× higher (p < .01) forces before gap formation compared to those prepared with a simple interrupted pattern. No difference was identified between tendons whose plate was secured with hybrid or figure-8 suture patterns. Mode of failure between groups did not differ. CONCLUSION: The figure-8 and hybrid patterns described herein improved the resistance to gap formation of plated tendons compared to an alternating simple interrupted pattern described previously. CLINICAL SIGNIFICANCE: Figure-8 and hybrid patterns should be considered over simple interrupted patterns to improve resistance to gap formation in horses undergoing tendon plating.

Radiation exposure associated with percutaneous fluoroscopically guided lag screw fixation for sacroiliac luxation in dogs.

OBJECTIVE: To determine radiation exposure to surgical personnel and to evaluate the accuracy of a modified percutaneous lag screw fixation technique for sacroiliac luxation (SIL) under fluoroscopic guidance in dogs. STUDY DESIGN: Cadaveric experimental study. SAMPLE POPULATION: Seventeen beagle cadavers with iatrogenic SIL. METHODS: Seventeen beagles with iatrogenic SIL underwent reduction and stabilization with 3.5-mm screws. Hypodermic needles (14 gauge) and fluoroscopy were used to orient two Kirschner wires for temporary stabilization and to guide drilling of glide and pilot holes using cannulated drill bits. Duration of surgery and radiation exposure were recorded. Postoperative computed tomographic evaluation of screw position and angulation was performed. RESULTS: Average time for fixation was 15.85 minutes (range, 6.37-33.5). Cumulative radiation doses of 0.4 mrem for the dominant arm of the assistant and 0 mrem for the primary surgeon were recorded. The mean dorsoventral and craniocaudal screw angles were 0.68° ± 3.4° (range - 5.4° to 9.5°) and 1.9° ± 3.2° (range - 4.3° to 9.1°), respectively. Sixteen of the 17 dogs had 100% sacral screw purchase, with the remaining case achieving 93.4% purchase. CONCLUSION: Fluoroscopy-assisted percutaneous placement of 3.5-mm cortical screws in lag fashion performed with 14-gauge needles in conjunction with Kirschner wires and cannulated drill bits yielded repeatable accurate screw placement with low levels of ionizing radiation exposure to the surgical team. CLINICAL SIGNIFICANCE: The described technique may be a viable method for minimally invasive osteosynthesis fixation of SIL with low levels of radiation exposure to the surgical team. These results provide evidence to support further evaluation of radiation exposure in clinical cases and can aid in study design and sample size determination.

Monitoring Wound Health through Bandages with Passive LC Resonant Sensors.

This paper details a passive, inductor-capacitor (LC) resonant sensor embedded in a commercial dressing for low-cost, contact-free monitoring of a wound; this would enable tracking of the healing process while keeping the site closed and sterile. Spiral LC resonators were fabricated from flexible, copper-coated polyimide and interrogated using external reader antennas connected to a two-port vector network analyzer; the forward transmission scattering parameter (S21) magnitude was collected, and the resonant frequency (MHz) and the peak-to-peak amplitude of the resonant feature were identified. These increase during the healing process as the permittivity and conductivity of the tissue change. The sensor was first tested on gelatin-based tissue-mimicking phantoms that simulate layers of muscle, blood, fat, and skin at varying phases of wound healing. Finite element modeling was also used to verify the empirical results based on the expected variations in dielectric properties of the tissue. The performance of the resonant sensors for in vivo applications was investigated by conducting animal studies using canine patients that presented with a natural wound as well as a controlled cohort of rat models with surgically administered wounds. Finally, transfer functions are presented that relate the resonant frequency to wound size using an exponential model (R2 = 0.58-0.96). The next steps in sensor design and fabrication as well as the reading platform to achieve the goal of a universal calibration curve are then discussed.

Numerical Investigation of Auxetic Textured Soft Strain Gauge for Monitoring Animal Skin.

Recent advances in hyperelastic materials and self-sensing sensor designs have enabled the creation of dense compliant sensor networks for the cost-effective monitoring of structures. The authors have proposed a sensing skin based on soft polymer composites by developing soft elastomeric capacitor (SEC) technology that transduces geometric variations into a measurable change in capacitance. A limitation of the technology is in its low gauge factor and lack of sensing directionality. In this paper, we propose a corrugated SEC through surface texture, which provides improvements in its performance by significantly decreasing its transverse Poisson's ratio, and thus improving its sensing directionality and gauge factor. We investigate patterns inspired by auxetic structures for enhanced unidirectional strain monitoring. Numerical models are constructed and validated to evaluate the performance of textured SECs, and to study their performance at monitoring strain on animal skin. Results show that the auxetic patterns can yield a significant increase in the overall gauge factor and decrease the stress experienced by the animal skin, with the re-entrant hexagonal honeycomb pattern outperforming all of the other patterns.

Use of flexible sensor to characterize biomechanics of canine skin.

BACKGROUND: Suture materials and techniques are frequently evaluated in ex vivo studies by comparing tensile strengths. However, the direct measurement techniques to obtain the tensile forces in canine skin are not available, and, therefore, the conditions suture lines undergo is unknown. A soft elastomeric capacitor is used to monitor deformation in the skin over time by sensing strain. This sensor was applied to a sample of canine skin to evaluate its capacity to sense strain in the sample while loaded in a dynamic material testing machine. The measured strain of the sensor was compared with the strain measured by the dynamic testing machine. The sample of skin was evaluated with and without the sensor adhered. RESULTS: In this study, the soft elastomeric capacitor was able to measure strain and a correlation was made to stress using a modified Kelvin-Voigt model for the canine skin sample. The sensor significantly increases the stiffness of canine skin when applied which required the derivation of mechanical models for interpretation of the results. CONCLUSIONS: Flexible sensors can be applied to canine skin to investigate the inherent biomechanical properties. These sensors need to be lightweight and highly elastic to avoid interference with the stress across a suture line. The sensor studied here serves as a prototype for future sensor development and has demonstrated that a lightweight highly elastic sensor is needed to decrease the effect on the sensor/skin construct. Further studies are required for biomechanical characterization of canine skin.

Application of tendon plating to manage failed calcaneal tendon repairs in a dog.

OBJECTIVE: To report the application of a plate to treat a complicated calcaneal tendon rupture and the resulting outcome. STUDY DESIGN: Clinical case report. ANIMALS: A 3-year-old Labrador retriever. METHODS: A 3-year-old Labrador retriever was treated for a partially ruptured calcaneal tendon. Two primary tendon repairs with sutures and external fixation had failed. A veterinary cuttable plate was placed to internally span the tendon over the primary repair. The external fixation that had been previously placed was maintained, and the dog was placed in a non-weight-bearing sling for 3 weeks after surgery. Adjunct therapy included an injection of platelet-rich plasma in the tendon and laser therapy. The external fixator was removed 4 weeks postoperatively, and the plate was removed 8 weeks postoperatively. RESULTS: A mature fibrous union bridged the site of anastomosis 8 weeks after surgery. The owners reported normal activity 6 months after surgery and symmetric hock angles and musculature 2 years after surgery. CONCLUSION: Adjunct plating of previously failed calcaneal tendon repairs in a dog resulted in an excellent long-term outcome. CLINICAL SIGNIFICANCE: Plating tendons can be considered as an additional method that may improve tendon apposition and decrease gap formation.

A Comparison of Ex Vivo Leak Pressures for Four Enterotomy Closures in a Canine Model.

Initial and maximum intraluminal leak pressures of four enterotomy closures were compared. Closure patterns included a modified Gambee, simple interrupted, simple continuous, and skin staple closure. Forty-eight 3-cm enterotomy constructs were created from jejunal segments harvested from 12 dogs. Twelve each were randomly assigned to the four closure methods. Time of closure, as well as initial and maximum leak pressures, were measured and compared. The modified Gambee closure was the slowest closure to perform, with skin staple closure being the fastest. All suture patterns tested had higher mean initial leak pressures than reported physiologic intestinal pressures during peristalsis, although the skin staple closures resulted in leakage below normal physiologic pressure in several samples. The modified Gambee closure was able to sustain a significantly higher initial leak pressure than skin staple closures. The modified Gambee suture pattern had the greatest maximum leak pressure of all enterotomy closure patterns tested. Use of the modified Gambee suture pattern should be considered in enterotomy closure, although in vivo studies are required to determine if these differences are clinically significant.

Comparison of tensile strength among simple interrupted, cruciate, intradermal, and subdermal suture patterns for incision closure in ex vivo canine skin specimens.

OBJECTIVE To compare suture placement time, tension at skin separation and suture line failure, and mode of failure among 4 suture patterns. DESIGN Randomized trial. SAMPLE 60 skin specimens from the pelvic limbs of 30 purpose-bred Beagles. PROCEDURES Skin specimens were harvested within 2 hours after euthanasia and tested within 6 hours after harvest. An 8-cm incision was made in each specimen and sutured with 1 of 4 randomly assigned suture patterns (simple interrupted, cruciate, intradermal, or subdermal). Suture placement time and percentage of skin apposition were evaluated. Specimens were mounted in a calibrated material testing machine and distracted until suture line failure. Tensile strength at skin-edge separation and suture-line failure and mode of failure were compared among the 4 patterns. RESULTS Mean suture placement time for the cruciate pattern was significantly less than that for other patterns. Percentage of skin apposition did not differ among the 4 patterns. Mean tensile strength at skin-edge separation and suture-line failure for the simple interrupted and cruciate patterns were significantly higher than those for the intradermal and subdermal patterns. Mean tensile strength at skin-edge separation and suture-line failure did not differ significantly between the intradermal and subdermal patterns or the simple interrupted and cruciate patterns. The primary mode of failure for the simple interrupted pattern was suture breakage, whereas that for the cruciate, intradermal, and subdermal patterns was tissue failure. CONCLUSIONS AND CLINICAL RELEVANCE Results suggested external skin sutures may be preferred for closure of incisions under tension to reduce risk of dehiscence.