Development of a technique based on multi-spectral imaging for monitoring the conservation of cultural heritage objects.

A new approach for monitoring the state of conservation of cultural heritage objects surfaces is being developed. The technique utilizes multi-spectral imaging, multivariate analysis and statistical process control theory for the automatic detection of a possible deterioration process, its localization and identification, and the wavelengths most sensitive to detecting this before the human eye can detect the damage or potential degradation changes occur. A series of virtual degradation analyses were performed on images of parchment in order to test the proposed algorithm in controlled conditions. The spectral image of a Dead Sea Scroll (DSS) parchment, IAA (Israel Antiquities Authority) inventory plate # 279, 4Q501 Apocryphal Lamentations B, taken during the 2008 Pilot of the DSS Digitization Project, was chosen for the simulation.

Technique based on LED multispectral imaging and multivariate analysis for monitoring the conservation state of the Dead Sea Scrolls.

The aim of this project is the development of a noninvasive technique based on LED multispectral imaging (MSI) for monitoring the conservation state of the Dead Sea Scrolls (DSS) collection. It is well-known that changes in the parchment reflectance drive the transition of the scrolls from legible to illegible. Capitalizing on this fact, we will use spectral imaging to detect changes in the reflectance before they become visible to the human eye. The technique uses multivariate analysis and statistical process control theory. The present study was carried out on a "sample" parchment of calfskin. The monitoring of the surface of a commercial modern parchment aged consecutively for 2 h and 6 h at 80 °C and 50% relative humidity (ASTM) was performed at the Imaging Lab of the Library of Congress (Washington, DC, U.S.A.). MSI is here carried out in the vis-NIR range limited to 1 µm, with a number of bands of 13 and bandwidths that range from about 10 nm in UV to 40 nm in IR. Results showed that we could detect and locate changing pixels, on the basis of reflectance changes, after only a few "hours" of aging.

Evaluation of signal and noise and identification of a suitable target function in the tuning of an ESI ion trap mass spectrometer by multivariate pattern recognition tools.

When mass spectrometry is not combined to separation techniques, the evaluation of signal and noise in a complex mass spectrum is not trivial. The tuning of the spectrometer based only on the increase of the signal of a selected number of m/z values does not ensure the achievement of the best experimental conditions: signal could improve and noise could increase as well. The scope of this work is the development of a function separating signal and noise (for evaluating the S/N) from complex mass spectra for potential use as target function for the automatic tuning of the instrument. Two different methods were applied: the first is based on the separation of a pool of m/z values attributable to the signal from the m/z values due to the noise, while the second is based on the application of principal component analysis to separate the signal (present in the significant components) from the noise (present in the residuals). The comparison of the two methods was carried out by the evaluation of the stability of the signal and the target functions obtained, and the evaluation of the variation of the target functions as a function of concentration.

Butene concentration prediction in ethylene/propylene/1-butene terpolymers by FT-IR spectroscopy through multivariate statistical analysis and artificial neural networks.

This paper reports the development of calibration models for quality control in the production of ethylene/propylene/1-butene terpolymers by the use of multivariate tools and FT-IR spectroscopy. 1-Butene concentration prediction is achieved in terpolymers by coupling FT-IR spectroscopy to multivariate regression tools. A dataset of 26 terpolymers (14 coming from a constrained experimental design for mixtures, plus 12 terpolymers used for external validation) was analysed by FT-IR spectroscopy. An internal method of "Polimeri Europa" plant, based on (13)C NMR spectroscopy is used to determine the percentage of 1-butene in the samples. Then, different multivariate tools are used for 1-butene concentration prediction based on the FT-IR spectra recorded. Different multivariate calibration methods were explored: principal component regression (PCR), partial least squares (PLS), stepwise OLS regression (SWR) and artificial neural networks (ANNs). The model obtained by back-propagation neural networks turned out to be the best one. The performances of the BP-ANN model were further improved by variable selection procedures based on the calculation of the first derivative of the network. The proposed approach allows the monitoring in real time of the polymer synthesis and the estimation of the characteristics of the product attainable from the concentration of 1-butene.

Oxidative and energetic efficiency of different electrochemical oxidation processes for chloroanilines abatement in aqueous medium.

The oxidative efficiency and energy consumption, in the degradation of chloroanilines by anodic oxidation, indirect oxidation with electrogenerated hydrogen peroxide and electro-Fenton have been compared, using a laboratory system driven by a LabVIEW virtual controller. Solutions were oxidized in an undivided cell, where H(2)O(2) was generated electrochemically by reduction of atmospheric oxygen bubbled at a carbon cloth cathode. The electro-Fenton process showed the best degradation power, in terms of efficiency of removal and energy consumption. This process was applied to the purification of a solution obtained by washing a polluted soil. Under laboratory conditions, electro-Fenton removed 75% COD of this wastewater with a specific energy consumption of 0.3kWh per gram of COD, corresponding to 41.8kWhm(-3).

SPME sampling of BTEX before GC/MS analysis: examples of outdoor and indoor air quality measurements in public and private sites.

This article presents the results of an exploratory application of the Solid Phase MicroExtraction (SPME) technique to the analysis of BTEX (benzene, toluene, ethylbenzene and xylenes) at the microg/m3 level in outdoor and indoor air. The salient features of the method validation are reported. As shown by the various examples of field sampling described, SPME technique appears as a method of choice for fast qualitative analysis and quantitative determination of Volatile Organic Compounds (VOC). The small dimensions of the SPME sampling system and the short sampling time let envisage its utilisation for the rapid diagnostic of outdoor and indoor air quality.

Determination of benzene, toluene, ethylbenzene and xylenes in air by solid phase micro-extraction/gas chromatography/mass spectrometry.

The aim of the study was to analyse BTEX compounds (benzene, toluene, ethylbenzene, xylenes) in air by solid phase micro-extraction/gas chromatography/mass spectrometry (SPME/GC/MS), and this article presents the features of the calibration method proposed. Examples of real-world air analysis are given. Standard gaseous mixtures of BTEX in air were generated by dynamic dilution. SPME sampling was carried out under non-equilibrium conditions using a Carboxen/PDMS fibre exposed for 30 min to standard gas mixtures or to ambient air. The behaviour of the analytical response was studied from 0 to 65 microg/m3 by adding increasing amounts of BTEX to the air matrix. Detection limits range from 0.05 to 0.1 microg/m3 for benzene, depending on the fibre. Inter-fibre relative standard deviations (reproducibility) are larger than 18%, although the repeatability for an individual fibre is better than 10%. Therefore, each fibre should be considered to be a particular sampling device, and characterised individually depending on the required accuracy. Sampling indoor and outdoor air by SPME appears to be a suitable short-delay diagnostic method for volatile organic compounds, taking advantage of short sampling time and simplicity.

Electrochemical or UV-photochemical oxidation of industrial wastes containing polar aromatic sulphonates.

UNLABELLED: BACKGROUND AND INTENTION: Aromatic sulphonates other than surfactants and their hydroxy and amino-derivatives are important intermediates for the production of azo dyes. Their production on a large scale can be detrimental for the environment, if the by-products of their synthesis are not disposed of appropriately. An industrial waste, the organic components of which were mainly amino and hydroxy-substituted aromatic sulphonates, seriously endangers the environment close to an dismissed Italian industrial site. Inorganic sulphates and chlorides contained in the waste seriously hinder its disposal by incineration, since they corrode furnace walls. In this work, preliminary exploration of aqueous-phase electrochemically and photochemically induced oxidation techniques have been performed as possible alternatives to incineration. METHODS: Electrochemically-induced oxidation was experimented on individual aromatic sulphonates and on an industrial waste by electrolysing them between smooth platinum electrodes at low temperature (5 degrees C) and high current densities (0.4 A/cm2) with aqueous 0.5 M NaHSO4 electrolyte. Photochemically-induced oxidation was performed by irradiating individual aromatic sulphonates or industrial waste with a 500 W mercury lamp in the presence of sodium peroxydisulphate. RESULTS AND DISCUSSION: After 200 min electrodegradation, 90% of the original compounds disappeared, while 50% Total Organic Carbon (TOC) of an industrial waste was removed from solution after 10 hours. After 180 min UV-photodegradation, 90% of two test aromatic sulphonates disappeared, while 65% of TOC of industrial waste was removed after 5 hours. CONCLUSIONS: Two methods, electrochemical and UV-persulphate oxidation of an industrial waste, were used in order to propose a disposal procedure alternative to incineration. Electrodegradation with smooth Pt anode in 0.5 M NaHSO4 at 5 degrees C halved TOC concentration within 10 hours, while persulphate-assisted UV-photochemical oxidation with a 500 W high pressure Hg lamp abated two-thirds of TOC concentration after 5 hours. Energetic consumption of electrodegradation was 0.33 kWh/g TOC, while that of photooxidation was larger than 2 kWh/g TOC. Although both techniques can be considered efficient from a purely chemical point of view, since both are capable of wet-oxidising the aromatic sulphonates and the industrial waste, electrodegradation seems more promising than a photochemical degradation if economical considerations are also taken into account. Considering also that neither cell design nor catalyst were optimised in this preliminary study, the energy yield of electrodegradation seems likely to be largely improved.

pH-dependent cyclodextrin capillary electrophoresis resolution of atropisomers.

Five noncommercial and four commercially available cyclodextrin (CD) derivatives were tested as chiral auxiliaries for the capillary electrophoretic (CE) resolution of racemic 1,1'-bi-(2-naphthol) (BN), 1,1'-binaphthyl-2,2'-diyl hydrogenphosphate (BNHP), and 1,1'-binaphthyl-2,2'-diamine (BNA) at pH 4.0, 6.5, and 8.6. The noncommercial CDs were ethyloxycarbonyl-gamma-CD (ethylcarbonate-gamma-CD), dimethylamino ethyloxycarbonyl-beta-CD, a mercaptosuccinic acid derivative of beta-CD, a maleic acid derivative of beta-CD and heptakis(6-deoxy-6-amino)-beta-CD derivative with one amino group on the C-6 carbon of each glucose unit. Except for the latter, the remaining derivatives were synthesized for this work. Also commercially available methyl-beta-CD, hydroxypropyl-beta-CD and the native beta- and gamma-CDs were examined. Among the nine CDs tested, the maleic acid derivative of beta-CD gave the most interesting performances, since it resolved the atropisomers of BNA and BNHP in the same electrophoretic run at pH 4.0. It resolved the BNA racemate also at pH 6.5. Both the negatively charged CD tested were found to resolve anionic BNHP enantiomers, while positively charged CDs did not with cationic BNA. Several of the CDs investigated in this work were found to resolve the BNHP racemate, although at nonoptimal concentration. None of the experimented CDs was found to resolve the electrically neutral BN atropisomers pair at the three pHs considered, while some among these nine, experimented in a previous work, did so at higher pH.