Optimization of fracturing technology for unconventional dense oil reservoirs based on rock brittleness index.

The concept of volume fracturing has revolutionized the conventional limits of low permeability, expanded the effective resource space, and significantly enhanced oil well production in tight oil reservoir development. This paper elucidates the mechanism of volume fracturing technology for tight sandstone reservoirs by considering multiple factors such as the initiation range of multi-fractures, influence of far-well horizontal principal stress on fracture initiation and propagation, degree of natural fractures development, and mechanical parameters of reservoir rock. Through simulation based on the mechanical parameters of reservoir rock, a comparative analysis was conducted between the model-calculated rock fracture pressure value and measured data from fracturing construction wells in the study area. The results revealed that there was a discrepancy within 10% between the model calculations and actual data. By simulating the effects of different injection volumes of fracturing fluid, pumping rates, and perforation methods on the fracture geometry, optimal design parameters for volume fracturing technology were obtained. Additionally, we propose optimization ideas and suggestions for construction parameters applicable to field operations. The simulation results indicate that a minimum recommended fluid volume scale exceeding 1800 m3 is advised for the reservoir. Based on frictional calculations, it is recommended to have an on-site construction rate not less than 18.0 m3/min along with 36-48 holes/section for perforation purposes. The numerical simulation research presented in this paper provides a theoretical reference basis and practical guidance for the application of fracturing network technology in tight sandstone reservoirs.

Mechanisms of nanoscale zero-valent iron mediating aerobic denitrification in Pseudomonas stutzeri by promoting electron transfer and gene expression.

Aerobic denitrification and its mechanism by P. stutzeri was investigated in the presence of nanoscale zero-valent iron (nZVI). The removal of nitrate and ammonia was accelerated and the nitrite nitrogen accumulation was reduced by nZVI. The particle size and dosage of nZVI were key factors for enhancing aerobic denitrification. nZVI reduced the negative effects of low carbon/nitrogen, heavy metals, surfactants and salts to aerobic denitrification. nZVI and its dissolved irons were adsorbed into the bacteria cells, enhancing the transfer of electrons from nicotinamide adenine dinucleotide (NADH) to nitrate reductase. Moreover, the activities of NADH-ubiquinone reductase involved in the respiratory system, and the denitrifying enzymes were increased. The expression of denitrifying enzyme genes napA and nirS, as well as the iron metabolism gene fur, were promoted in the presence of nZVI. This work provides a strategy for enhancing the biological denitrification of wastewater using the bio-stimulation of nanomaterials.

Development and Characterization of Thermoresponsive Smart Self-Adaptive Chitosan-Based Polymer for Wellbore Plugging.

To meet the escalating demand for oil and gas exploration in microporous reservoirs, it has become increasingly crucial to develop high-performance plugging materials. Through free radical grafting polymerization technology, a carboxymethyl chitosan grafted poly (oligoethylene glycol) methyl ether methyl methacrylate acrylic acid copolymer (CCMMA) was successfully synthesized. The resulting CCMMA exhibited thermoresponsive self-assembling behavior. When the temperature was above its lower critical solution temperature (LCST), the nanomicelles began to aggregate, forming mesoporous aggregated structures. Additionally, the electrostatic repulsion of AA chains increased the value of LCST. By precisely adjusting the content of AA, the LCST of CCMMA could be raised from 84.7 to 122.9 °C. The rheology and filtration experiments revealed that when the temperature surpassed the switching point, CCMMA exhibited a noteworthy plugging effect on low-permeability cores. Furthermore, it could be partially released as the temperature decreased, exhibiting temperature-switchable and self-adaptive plugging properties. Meanwhile, CCMMA aggregates retained their reversibility, along with thermal thickening behavior in the pores. However, more detailed experiments and analysis are needed to validate these claims, such as a comprehensive study of the CCMMA copolymer's physical properties, its interaction with the reservoir environment, and its performance under various conditions. Additionally, further studies are required to optimize its synthesis process and improve its efficiency as a plugging material for oil and gas recovery in microporous reservoirs.

Erosion Life Prediction of Metal Mesh Screen Pipes in Oil Wells Based on Numerical Simulation of Discrete Particle Flow.

High-speed fluid-carried sand particles pose a significant challenge to oil well screen pipes, leading to sand control failure and adversely affecting the well's production and recovery rates. This research targets the commonly used metal mesh screen pipe in oil well sand production and establishes a full-sized three-dimensional structure model. A fluid-solid coupling of discrete particle flow numerical simulation algorithm is incorporated to formulate a novel method for predicting the screen pipe's erosion life. This method provides a solution to the complex task of predicting the pipe's lifespan under oil sand fluid erosion. The analysis elucidates the impact of sand particles on the velocity distribution and erosion rate of the metal mesh at varying velocities, facilitating the prediction of the mesh screen pipe's erosion life. Key findings reveal that the velocity and erosion rate vary across the different layers. The first layer screen experiences velocity and erosion rates that are 3.6-3.76 times and 2.45-2.50 times, respectively, higher than those at the inlet. The second layer screen undergoes velocity and erosion rates 2.32-2.43 times and 1.04-1.06 times, respectively, higher than those at the inlet. Erosion failure primarily occurs in the first layer screen due to velocity expansion instigated by the screen tube's structure. The discrete flow numerical simulation method proves valuable in predicting the mesh screen's erosion life at different flow rates, with a maximum error of 6.38% when compared with field monitoring life values. This method introduces a new technical approach to predicting the life span of metal mesh screens in oil wells. The study concludes by suggesting measures to extend the screen pipe's lifespan, thereby enhancing oil recovery.

Development and Characterization of CO2-Responsive Intelligent Polymer Sealant.

In this study, we present an innovative intelligent polymer sealant designed to mitigate CO2 leakage during underground geological storage (CCUS). This sealant is formulated by cross-linking CO2-responsive polymers, specifically acrylamide (AM) and N-[3-(dimethylamino) propyl] methacrylamide (DMAPMA), with polyethylenimine (PEI) serving as the cross-linking agent. The polymer sealant's characteristics were systematically investigated, varying the CO2-responsive polymer content (1.5 wt %) and PEI content (0.1-0.6 wt %). A comprehensive analysis encompassing the rheological properties, thermal behavior, conductivity, and microstructures was conducted. Experimental results indicate that the polymer sealant exhibits excellent injectability, rapid response kinetics, thermal stability, and robust mechanical strength. Upon encountering CO2, the polymer system undergoes a transition from sol to gel state, forming a surface-smooth, uniformly porous three-dimensional (3D) network skeleton structure. Remarkably, the gel's modulus remains relatively unaffected by the shear frequency. Core fluid displacement experiments demonstrated a substantial sealing efficiency of 73.6% for CO2 and an impressive subsequent injection water sealing rate of 96.2%, underscoring its superior sealing and migration performance. In conclusion, the proposed CO2-responsive gel sealant exhibits an exceptional potential for successful utilization in CCUS operations. This advancement introduces a novel avenue to enhance the effectiveness of CO2-responsive gel sealants, thereby contributing to the advancement of CO2 leakage mitigation strategies in geological storage scenarios.

Activation of peroxymonosulfate by biochar-supported Fe3O4 derived from oily sludge to enhance the oxidative degradation of tetracycline hydrochloride.

Carbon materials used for catalysis in advanced oxidation processes tend to be obtained from cheap and readily available raw materials. We constructed a carbon material, OSC@Fe3O4, by loading Fe3O4 onto the pyrolyzed hazardous waste oily sludge. OSC@Fe3O4 was then used to activate peroxymonosulfate (PMS) for the removal of tetracycline hydrochloride (TTCH) from water. At 298 K, 0.2 g⋅L-1 of catalyst and 0.3 g⋅L-1 of PMS, the reaction rate constant of the OSC@I-2/PMS system reached 0.079 min-1, with a TTCH removal efficiency of 92.6%. The degradation efficiency of TTCH remained at 81% after five cycles. The specific surface area and pore volume of OSC@I-2 were 263.9 m2⋅g-1 and 0.42 cm3⋅g-1, respectively, which improved the porous structure of the carbon material and provided more active points, thus improving the catalytic performance. N and S were doped into the oily sludge carbon due to the presence of N- and S-containing compounds in the raw oily sludge. N and S doping led to more electron-rich sites with higher negative charges in OSC@I-2 and gave the oily sludge carbon a higher affinity to PMS, thereby promoting its ability to activate PMS. Sulfate radicals (SO4•‾) played a dominant role in the degradation of TTCH, with demethylation and the breaking of double bonds being a possible degradation pathway. A biotoxicity test showed that the microbial toxicity of the degradation intermediates was significantly reduced. This work provides a strategy for the application of PMS-based catalysts derived from waste carbon resources.