A short linear glucan nanocomposite hydrogel formed by in situ self-assembly with highly elastic, fatigue-resistant and self-recovery.

Polyacrylamide (PAM) hydrogels are widely used in wide-ranging applications in biology, medicine, pharmaceuticals and environmental sectors. However, achieving the requisite mechanical properties, fatigue resistance, self-recovery, biocompatibility, and biodegradability remains a challenge. Herein, we present a facile method to construct a nanocomposite hydrogel by integrating short linear glucan (SLG), obtained by debranching waxy corn starch, into a PAM network through self-assembly. The resulting composite hydrogel with 10 % SLG content exhibited satisfactory stretchability (withstanding over 1200 % strain), along with maximum compressive and shear strengths of about 490 kPa and 39 kPa at 90 % deformation, respectively. The hydrogel demonstrated remarkable resilience and could endure repeated compression and stretching. Notably, the nanocomposite hydrogel with 10 % SLG content exhibited full stress recovery at 90 % compression deformation after 20 s, without requiring specific environmental conditions, achieving an energy dissipation recovery rate of 98 %. Meanwhile, these hydrogels exhibited strong adhesion to various soft and hard substrates, including skin, glasses and metals. Furthermore, they maintain solid integrity at both 37 °C and 50 °C after swelling equilibrium, unlike traditional PAM hydrogels, which exhibited softening under similar conditions. We hope that this PAM-SLG hydrogel will open up new avenues for the development of multifunctional electronic devices, offering enhanced performance and versatility.

Design and Characterization of a Novel Core-Shell Nano Delivery System Based on Zein and Carboxymethylated Short-Chain Amylose for Encapsulation of Curcumin.

Curcumin is a naturally occurring hydrophobic polyphenolic compound with a rapid metabolism, poor absorption, and low stability, which severely limits its bioavailability. Here, we employed a starch-protein-based nanoparticle approach to improve the curcumin bioavailability. This study focused on synthesizing nanoparticles with a zein "core" and a carboxymethylated short-chain amylose (CSA) "shell" through anti-solvent precipitation for delivering curcumin. The zein@CSA core-shell nanoparticles were extensively characterized for physicochemical properties, structural integrity, ionic stability, in vitro digestibility, and antioxidant activity. Fourier-transform infrared (FTIR) spectroscopy indicates nanoparticle formation through hydrogen-bonding, hydrophobic, and electrostatic interactions between zein and CSA. Zein@CSA core-shell nanoparticles exhibited enhanced stability in NaCl solution. At a zein-to-CSA ratio of 1:1.25, only 15.7% curcumin was released after 90 min of gastric digestion, and 66% was released in the intestine after 240 min, demonstrating a notable sustained release effect. Furthermore, these nanoparticles increased the scavenging capacity of the 1,1-diphenyl-2-picrylhydrazyl (DPPH•) free radical compared to those composed solely of zein and were essentially nontoxic to Caco-2 cells. This research offers valuable insights into curcumin encapsulation and delivery using zein@CSA core-shell nanoparticles.

The Construction of Sodium Alginate/Carboxymethyl Chitosan Microcapsules as the Physical Barrier to Reduce Corn Starch Digestion.

To enhance the resistant starch (RS) content of corn starch, in this work, carboxymethyl chitosan/corn starch/sodium alginate microcapsules (CMCS/CS/SA) with varying concentrations of SA in a citric acid (CA) solution were designed. As the SA concentration increased from 0.5% to 2%, the swelling of the CMCS/CS/SA microcapsule decreased from 15.28 ± 0.21 g/g to 3.76 ± 0.66 g/g at 95 °C. Comparatively, the onset, peak, and conclusion temperatures (To, Tp, and Tc) of CMCS/CS/SA microcapsules were higher than those of unencapsulated CS, indicating that the dense network structure of microcapsules reduced the contact area between starch granules and water, thereby improving thermal stability. With increasing SA concentration, the intact and dense network of CMCS/CS/SA microcapsules remained less damaged after 120 min of digestion, suggesting that the microcapsules with a high SA concentration provided better protection to starch, thereby reducing amylase digestibility. Moreover, as the SA concentration increased from 0.5% to 2%, the RS content of the microcapsules during in vitro digestion rose from 42.37 ± 0.07% to 57.65 ± 0.45%, attributed to the blocking effect of the microcapsule shell on amylase activity. This study offers innovative insights and strategies to develop functional starch with glycemic control properties, holding significant scientific and practical value in preventing diseases associated with abnormal glucose metabolism.

Controlled growth of MoS2 via surface-energy alterations.

Monolayer MoS2 in triangular configurations with rich edges or high-quality uniform films are either catalytically active for the hydrogen evolution reaction or flexible for functional electronic and optoelectronic devices. Here, we have experimentally discovered that these two types of MoS2 products can be selectively synthesized on graphene or sapphire substrates, which are associated with both different adsorption energy and diffusion-energy barrier for vapor precursors during growth. Our study not only provides insights into the on-surface synthesis of high-quality MoS2 monolayers, but also can be applied to the growth of vertically-stacked and large-scale in-plane lateral MoS2-graphene heterostructures.

Critical Annealing Temperature for Stacking Orientation of Bilayer Graphene.

It is rarely reported that stacking orientations of bilayer graphene (BLG) can be manipulated by the annealing process. Most investigators have painstakingly fabricated this BLG by chemical vapor deposition growth or mechanical means. Here, it is discovered that, at ≈600 °C, called the critical annealing temperature (CAT), most stacking orientations collapse into strongly coupled or AB-stacked states. This phenomenon is governed (i) macroscopically by the stress generation and release in top graphene domains, evolving from mild ripples to sharp billows in certain local areas, and (ii) microscopically by the principle of minimal potential obeyed by carbon atoms that have acquired sufficient thermal energy at CAT. Conspicuously, evolutions of stacking orientations in Raman mappings under various annealing temperatures are observed. Furthermore, MoS2 synthesized on BLG is used to directly observe crystal orientations of top and bottom graphene layers. The finding of CAT provides a guide for the fabrication of strongly coupled or AB-stacked BLG, and can be applied to aligning other 2D heterostructures.

Continuous-wave and chemical vapor deposition graphene-based passively Q-switched Er:Y2O3 ceramic lasers at 2.7 µm.

We report on 976-nm diode-pumped Er:Y2O3 ceramic lasers in continuous-wave and passively Q-switched regimes. The maximum output power of continuous-wave laser operation is about 0.78 W with slope efficiency of about 11.8% at 2.7 µm. Passively Q-switched Er:Y2O3 ceramic laser operation with chemical vapor deposition (CVD) graphene as the saturable absorber is also demonstrated for the first time, to our knowledge. Using a monolayer CVD graphene, the achieved shortest pulse width is about 408 ns, while the shortest pulse width reduces to about 296 ns with pulse energy of 2.59 µJ and peak power of 8.77 W by using a three-layer CVD graphene. The results reveal that graphene is a very promising saturable absorber operating in the middle infrared spectral region.

Capabilities of transition metals in retarding the bonding of carbon atoms to minimize dendritic graphene.

The avoidance of growing dendritic graphene on the copper substrate during the chemical vapor deposition process is greatly desired. Here we have identified a mechanism, in which (1) transition metal plates placed inside the copper pockets reduce the majority of active carbon atoms to eventually suppress the graphene growth rate, and (2) transition metals etch graphene C-C bonds along defective edges to grow into zigzag-edge ending domains with higher priorities. Via isotopic labeling of the methane method, we have observed bright-dark-alternating hexagonal-shaped rings, which are shown in Raman mapping images. Under a hydrogen atmosphere, we are capable of acquiring hexagonal openings within graphene domains by means of transition-metal-driven catalytic etching. This methodology may work as a simple and convenient way to determine graphene size and crystal orientation, and may enable the etching of graphene into smooth and ordered zigzag edge nanoribbons without compromising the quality of graphene.

A visualization method for probing grain boundaries of single layer graphene via molecular beam epitaxy.

Graphene, a member of layered two-dimensional (2D) materials, possesses high carrier mobility, mechanical flexibility, and optical transparency, as well as enjoying a wide range of promising applications in electronics. Adopting the chemical vaporization deposition method, the majority of investigators have ubiquitously grown single layer graphene (SLG), which inevitably involves polycrystalline properties. Here we demonstrate a simple method for the direct visualization of arbitrarily large-size SLG domains by synthesizing one-hundred-nm-scale MoS2 single crystals via a high-vacuum molecular beam epitaxy process. The present study based on epitaxial growth provides a guide for probing the grain boundaries of various 2D materials and implements higher potentials for the next-generation electronic devices.

Temperature-Related Morphological Evolution of MoS2 Domains on Graphene and Electron Transfer within Heterostructures.

Other than the well-known sulfurization of molybdate compound to synthesize molybdenum disulfide (MoS2 ) layers, the dynamic process in the whole crystalline growth from nuclei to triangular domains has been rarely experimentally explored. Here, a competing sulfur-capture principle jointly with strict epitaxial mechanism is first proposed for the initial topography evolution and the final intrinsic highly oriented growth of triangular MoS2 domains with Mo or S terminations on the graphene (Gr) template. Additionally, potential distributions on MoS2 domains and bare Gr are presented to be different due to the charge transfer within heterostructures. The findings offer the mechanism of templated growth of 2D transition metal dichalcogenides, and provide general principles in syntheses of vertical 2D heterostructures that can be applied to electronics.