Clinicopathological characteristics and diagnostic accuracy of BRAF mutations in ameloblastoma: A Bayesian network analysis.

OBJECTIVE: This Bayesian network meta-analysis was performed to analyze the associations between clinicopathological characteristics and BRAF mutations in ameloblastoma (AM) patients and to evaluate the diagnostic accuracy. MATERIALS AND METHODS: Four electronic databases were searched from 2010 to 2024. The search terms used were specific to BRAF and AM. Observational studies or randomized controlled trials were considered eligible. The incidence of BRAF mutation and corresponding clinicopathological features in AM patients were subjected to Bayesian network analyses and diagnostic accuracy evaluation. RESULTS: A total of 937 AM patients from 20 studies were included. The pooled prevalence of BRAF mutations in AM patients was 72%. According to the Bayesian network analysis, BRAF mutations are more likely to occur in younger (odds ratio [OR], 2.3; credible interval [CrI]: 1.2-4.5), mandible site (OR, 3.6; 95% CrI: 2.7-5.2), and unicystic (OR, 1.6; 95% CrI: 1.1-2.4) AM patients. Similarly, higher diagnostic accuracy was found in the younger, mandible, and unicystic AM groups. CONCLUSIONS: The incidence, risk, and diagnostic accuracy of BRAF mutation in AM were greater in younger patients, those with mandible involvement, and those with unicystic AM than in patients with other clinicopathological features. In addition, there was a strong concordance in the diagnostic accuracy between molecular tests and immunohistochemical analysis.

CT-based radiomics analysis of different machine learning models for differentiating gnathic fibrous dysplasia and ossifying fibroma.

OBJECTIVE: In this study, our aim was to develop and validate the effectiveness of diverse radiomic models for distinguishing between gnathic fibrous dysplasia (FD) and ossifying fibroma (OF) before surgery. MATERIALS AND METHODS: We enrolled 220 patients with confirmed FD or OF. We extracted radiomic features from nonenhanced CT images. Following dimensionality reduction and feature selection, we constructed radiomic models using logistic regression, support vector machine, random forest, light gradient boosting machine, and eXtreme gradient boosting. We then identified the best radiomic model using receiver operating characteristic (ROC) curve analysis. After combining radiomics features with clinical features, we developed a comprehensive model. ROC curve and decision curve analysis (DCA) demonstrated the models' robustness and clinical value. RESULTS: We extracted 1834 radiomic features from CT images, reduced them to eight valuable features, and achieved high predictive efficiency, with area under curves (AUC) exceeding 0.95 for all the models. Ultimately, our combined model, which integrates radiomic and clinical data, displayed superior discriminatory ability (AUC: training cohort 0.970; test cohort 0.967). DCA highlighted its optimal clinical efficacy. CONCLUSION: Our combined model effectively differentiates between FD and OF, offering a noninvasive and efficient approach to clinical decision-making.

Can botulinum toxin injection alleviate the pain of bruxism? A Bayesian network analysis and a single-arm analysis.

Background/purpose: There is inconsistent evidence regarding whether the botulinum toxin A (BTA) injection can relieve pain caused by bruxism. This study aimed to estimate the efficiency of BTA injection in relieving pain caused by bruxism at different follow-up periods. Materials and methods: Five electronic databases were searched from 2005 to 2022 using search terms related to botulinum toxin and bruxism. Only controlled clinical trials were included. Two investigators reviewed each article and discussed any disagreements until a consensus was reached. Pain outcomes as evaluated by the visual analogue scale (VAS) were subjected to single-arm and Bayesian network meta-analyses. Pooling data were measured by a random-effects model. Results: Eleven studies with a total of 365 bruxism patients were included. According to the single-arm analyses of the pooled data, the reduction in bruxism-related pain after BTA injection measured 4.06 points (95% CI = 3.37 to 4.75) on the VAS, and the pain relief was significant in the first 6 months after treatment (P < 0.01). According to the Bayesian analysis, BTA also resulted in significantly greater pain relief than oral splinting (mean difference (MD), -1.5; 95% credible interval (CrI) = -2.7 to -0.19) or saline injection (MD, -3.3; 95% CrI = -6.2 to -0.32). Conclusion: BTA significantly relieves the pain of bruxism for 6 months after injection, and its therapeutic efficacy was higher than that of oral splinting. Nevertheless, further long-term follow-up randomized controlled trials comparing BTA with other management or drugs are warranted.

Exosomes derived from human umbilical cord mesenchymal stem cells decrease neuroinflammation and facilitate the restoration of nerve function in rats suffering from intracerebral hemorrhage.

Exosomes derived from human umbilical cord mesenchymal stem cells (hUCMSC-ex) have become a hopeful substitute for whole-cell therapy due to their minimal immunogenicity and tumorigenicity. The present study aimed to investigate the hypothesis that hUCMSC-ex can alleviate excessive inflammation resulting from intracerebral hemorrhage (ICH) and facilitate the rehabilitation of the nervous system in rats. In vivo, hemorrhagic stroke was induced by injecting collagenase IV into the striatum of rats using stereotactic techniques. hUCMSC-ex were injected via the tail vein at 6 h after ICH model establishment at a dosage of 200 µg. In vitro, astrocytes were pretreated with hUCMSC-ex and then stimulated with hemin (20 µmol/mL) to establish an ICH cell model. The expression of TLR4/NF-κB signaling pathway proteins and inflammatory factors, including TNF-α, IL-1ß, and IL-10, was assessed both in vivo and in vitro to investigate the impact of hUCMSC-ex on inflammation. The neurological function of the ICH rats was evaluated using the corner turn test, forelimb placement test, Longa score, and Bederson score on the 1st, 3rd, and 5th day. Additionally, RT-PCR was employed to examine the mRNA expression of TLR4 following hUCMSC-ex treatment. The findings demonstrated that hUCMSC-ex downregulated the protein expression of TLR4, NF-κB/P65, and p-P65, reduced the levels of pro-inflammatory cytokines TNF-α and IL-1ß, and increased the expression of the anti-inflammatory cytokine IL-10. Ultimately, the administration of hUCMSC-ex improved the behavioral performance of the ICH rats. However, the results of PT-PCR indicated that hUCMSC-ex did not affect the expression of TLR4 mRNA induced by ICH, suggesting that hUCMSCs-ex may inhibit TLR4 translation rather than transcription, thereby suppressing the TLR4/NF-κB signaling pathway. We can conclude that hUCMSC-ex mitigates hyperinflammation following ICH by inhibiting the TLR4/NF-κB signaling pathway. This study provides preclinical evidence for the potential future application of hUCMSC-ex in the treatment of cerebral injury.

The effect of carbon nanoparticles vs. immune colloidal gold technique test strips on parathyroid protection in total thyroidectomy: A randomized clinical trial study.

BACKGROUND: The long-term effect of intraoperative usage of carbon nanoparticles (CN) and parathyroid hormone (PTH) test strip using immune colloidal gold technique (ICGT) is unclear. This study aims to compare the effect of intraoperative usage of CN and ICGT test strips on PG function. METHODS: This randomized clinical study involved adult patients who underwent total thyroidectomy. They were randomly allocated into three groups (control, CN, and ICGT group). Clinical data were analyzed. RESULTS: Each group involved 98 patients. Serum calcium and PTH concentrations at 24 h postoperatively (PTH24h) were higher in CN group. The parathyroid function recovered quicker in CN group. Use of CN increased in situ PG preservation and PTH24h. Mediation analysis indicated that 23.05% of the total effect of CN on PTH24h was attributed to PGRIS. CONCLUSION: CN holds promise to improve in situ PG preservation and protect PG vasculature, thereby reducing the incidence of early hypoparathyroidism. The value of ICGT test strips for PG protection is dubious.

Bamboo-Inspired Porous Scaffolds for Advanced Orthopedic Implants: Design, Mechanical Properties, and Fluid Characteristics.

In orthopedic implant development, incorporating a porous structure into implants can reduce the elastic modulus to prevent stress shielding but may compromise yield strength, risking prosthesis fracture. Bamboo's natural structure, with its exceptional strength-to-weight ratio, serves as inspiration. This study explores biomimicry using bamboo-inspired porous scaffolds (BISs) resembling cortical bone, assessing their mechanical properties and fluid characteristics. The BIS consists of two 2D units controlled by structural parameters α and ß. The mechanical properties, failure mechanisms, energy absorption, and predictive performance are investigated. BIS exhibits mechanical properties equivalent to those of natural bone. Specifically, α at 4/3 and ß at 2/3 yield superior mechanical properties, and the destruction mechanism occurs layer by layer. Besides, the Gibson-Ashby models with different parameters are established to predict mechanical properties. Fluid dynamics analysis reveals two high-flow channels in BISs, enhancing nutrient delivery through high-flow channels and promoting cell adhesion and proliferation in low-flow regions. For wall shear stress below 30 mPa (ideal for cell growth), α at 4/3 achieves the highest percentage (99.04%), and ß at 2/3 achieves 98.46%. Permeability in all structural parameters surpasses that of human bone. Enhanced performance of orthopedic implants through a bionic approach that enables the creation of pore structures suitable for implants.

An association between ATP7B expression and human cancer prognosis and immunotherapy: a pan-cancer perspective.

BACKGROUND: ATP7B is a copper-transporting protein that contributes to the chemo-resistance of human cancer cells. It remains unclear what the molecular mechanisms behind ATP7B are in cancer, as well as its role in human pan-cancer studies. METHODS: Our study evaluated the differential expression of ATP7B in cancer and paracancerous tissues based on RNA sequencing data from the GTEx and TCGA. Kaplan-Meier and Cox proportional hazards regressions were used to estimate prognostic factors associated with ATP7B.The correlations between the expression of ATP7B and immune cell infiltration, tumor mutation burden, microsatellite instability and immune checkpoint molecules were analyzed. Co-expression networks and mutations in ATP7B were analyzed using the web tools. An analysis of ATP7B expression difference on drug sensitivity on tumor cells was performed using the CTRP, GDSC and CMap database. RESULTS: ATP7B expression differed significantly between cancerous and paracancerous tissues. The abnormal expression of ATP7B was linked to prognosis in LGG and KIRC. Infiltration of immune cells, tumor mutation burden, microsatellite instability and immunomodulators had all been linked to certain types of cancer. Cancer cells exhibited a correlation between ATP7B expression and drug sensitivity. CONCLUSION: ATP7B might be an immunotherapeutic and prognostic biomarker based on its involvement in cancer occurrence and development.

Influence of ferroptosis indicators on the stability of atherosclerotic plaque.

Ferroptosis is a new form of cell death that is unique and closely related to iron concentration, and reactive oxygen species (ROS) production. We investigated the indicators of ferroptosis between vulnerable plaque and stable plaque in atherosclerotic. Quantitative real-time polymerase chain reaction (qRT-PCR) and Western blotting were used to detect the expression of the ferroptosis-related genes and proteins and extracellular matrix stability-related genes and proteins (FN, CoL-1). Superoxide dismutase (SOD) activities, glutathione peroxidase (GSH) and malondialdehyde (MDA) were detected by ELISA. The commercially available kit was used to detect Fe2+ concentration in tissue. DCFH-DA fluorescent probe was used to detect the ROS levels. H&E stain, Masson trichrome stain, and Oil Red O stain were used to detect pathological states in vulnerable plaque and stable plaque. Tissue localization and positive rate of GPX4, SLC7A11, COX-2, FN, and COL-1 were evaluated by immunohistochemistry. The results showed a significant increase in the expression of COX2 and a significant decrease in the expression of GPX4 and SLC7A11 in genes related to ferroptosis in vulnerable plaque compared with stable plaque. Pathologic results showed vulnerable plaque with higher levels of inflammatory cell infiltration, more diffuse collagen fibers, and larger particles of lipid droplets. Concentrations of the antioxidant metabolites SOD and GSH were significantly reduced and concentrations of the oxidative metabolites MDA and Fe2+ were significantly increased in vulnerable plaque compared with stable plaque. The expression of FN and CoL-1 was significantly reduced in genes related to extracellular matrix stability in vulnerable plaque. Taken together, these findings indicate that the degree of ferroptosis in vulnerable plaque is higher than that in stable plaque, suggesting that changes in indicators of ferroptosis may affect carotid atherosclerotic plaque stability, target spot in the ferroptosis signaling pathway may provide further theoretical basis for the clinical treatment of carotid atherosclerosis.

Recent advancement in vascularized tissue-engineered bone based on materials design and modification.

Bone is one of the most vascular network-rich tissues in the body and the vascular system is essential for the development, homeostasis, and regeneration of bone. When segmental irreversible damage occurs to the bone, restoring its vascular system by means other than autogenous bone grafts with vascular pedicles is a therapeutic challenge. By pre-generating the vascular network of the scaffold in vivo or in vitro, the pre-vascularization technique enables an abundant blood supply in the scaffold after implantation. However, pre-vascularization techniques are time-consuming, and in vivo pre-vascularization techniques can be damaging to the body. Critical bone deficiencies may be filled quickly with immediate implantation of a supporting bone tissue engineered scaffold. However, bone tissue engineered scaffolds generally lack vascularization, which requires modification of the scaffold to aid in enhancing internal vascularization. In this review, we summarize the relationship between the vascular system and osteogenesis and use it as a basis to further discuss surgical and cytotechnology-based pre-vascularization strategies and to describe the preparation of vascularized bone tissue engineered scaffolds that can be implanted immediately. We anticipate that this study will serve as inspiration for future vascularized bone tissue engineered scaffold construction and will aid in the achievement of clinical vascularized bone.

Biomechanical evaluation of a novel individualized zero-profile cage for anterior cervical discectomy and fusion: a finite element analysis.

Introduction: Anterior cervical discectomy and fusion (ACDF) is a standard procedure for treating symptomatic cervical degenerative disease. The cage and plate constructs (CPCs) are widely employed in ACDF to maintain spinal stability and to provide immediate support. However, several instrument-related complications such as dysphagia, cage subsidence, and adjacent segment degeneration have been reported in the previous literature. This study aimed to design a novel individualized zero-profile (NIZP) cage and evaluate its potential to enhance the biomechanical performance between the instrument and the cervical spine. Methods: The intact finite element models of C3-C7 were constructed and validated. A NIZP cage was designed based on the anatomical parameters of the subject's C5/6. The ACDF procedure was simulated and the CPCs and NIZP cage were implanted separately. The range of motion (ROM), intradiscal pressure (IDP), and peak von Mises stresses of annulus fibrosus were compared between the two surgical models after ACDF under four motion conditions. Additionally, the biomechanical performance of the CPCs and NIZP cage were evaluated. Results: Compared with the intact model, the ROM of the surgical segment was significantly decreased for both surgical models under four motion conditions. Additionally, there was an increase in IDP and peak von Mises stress of annulus fibrosus in the adjacent segment. The NIZP cage had a more subtle impact on postoperative IDP and peak von Mises stress of annulus fibrosus in adjacent segments compared to CPCs. Meanwhile, the peak von Mises stresses of the NIZP cage were reduced by 90.0-120.0 MPa, and the average von Mises stresses were reduced by 12.61-17.56 MPa under different motion conditions. Regarding the fixation screws, the peak von Mises stresses in the screws of the NIZP cage increased by 10.0-40.0 MPa and the average von Mises stresses increased by 2.37-10.10 MPa. Conclusion: The NIZP cage could effectively reconstruct spinal stability in ACDF procedure by finite element study. Compared with the CPCs, the NIZP cage had better biomechanical performance, with a lower stress distribution on the cage and a more moderate effect on the adjacent segmental discs. Therefore, the NIZP cage could prevent postoperative dysphagia as well as decrease the risk of subsidence and adjacent disc degeneration following ACDF. In addition, this study could serve as a valuable reference for the development of personalized instruments.

Adenoid Ameloblastoma Shares Clinicopathologic, Immunohistochemical, and Molecular Features With Dentinogenic Ghost Cell Tumor: A Comparative Analysis.

The updated classification of odontogenic tumors by the World Health Organization (WHO) has included adenoid ameloblastoma (AA) as a distinct entity. However, distinguishing between AA and dentinogenic ghost cell tumor (DGCT) can still be challenging due to their significant morphologic similarities. In this study, we aimed to compare the clinicopathologic, immunohistochemical, and molecular characteristics of AA and DGCT to aid in their differentiation and to shed light on their pathologic mechanisms. Thirteen cases of AA and 14 cases of DGCT (15 samples) were analyzed, along with 11 cases of adenomatoid odontogenic tumor (AOT) and 18 cases of conventional ameloblastoma (AM) for comparative purposes. The study found that AA and DGCT shared a similar long-term prognosis. Immunohistochemically, all cytokeratins detected, except CK8/18, were not statistically significant in differentiating AA and DGCT, while there was a statistically significant difference in the immunophenotype of CK7 and CK10/13 between AA and AM. Nuclear ß-catenin accumulation were detected in all cases of AA and DGCT, while AOTs and AMs exhibited cytoplasmic ß-catenin. Molecularly, CTNNB1 hotspot mutations were found in only 1 case of AA (1/13), but not found in the other 3 types of tumors. BRAF p.V600E mutation was positive in 2/13 (15%) AA, 1/15 (7%) DGCT, and 2/11 (18%) AOT cases. In comparison, conventional AM was positive for BRAF p.V600E mutation in 94% (17/18) of cases, while KRAS mutations were detected in 63% (7/11) of AOT cases. The study suggests that the so-called AA is a rare benign tumor that exhibits clinical, immunohistochemical, and molecular features similar to DGCTs. Based on these findings, AA should not be categorized as a standalone entity solely based on the presence of whorls/morules and cribriform/duct-like structures. Further studies are needed to investigate the pathologic mechanisms of these tumors and to identify potential therapeutic targets.

Prompt diagnosis and airway management for primary thyroid lymphoma with compromised upper airway: a single-institution case series.

Objectives: Primary thyroid lymphoma (PTL) is a rare malignant tumour. Prompt and accurate diagnosis and optimal airway management are crucial for PTL, especially when complicated with dyspnoea. Methods: Eight patients with PTL and dyspnoea treated in Beijing Friendship Hospital from January 2015 to December 2021 were retrospectively reviewed. Results: Three of four patients complicated with mild to moderate dyspnoea underwent chemotherapy after prompt diagnosis by fine needle aspiration cytology (FNAC) combined with cell block immunocytochemistry (CB-ICC) and flow cytometric immunophenotyping (FCI) or core needle biopsy (CNB) combined with immunohistochemistry (IHC) without open surgery. Total thyroidectomy was performed in one patient without other diagnostic methods because the FNAC result was inconclusive. Four patients with moderate to severe dyspnoea underwent tracheostomy and incisional biopsy without severe complications after tracheal intubation under the guidance of a fibreoptic bronchoscope performed without general anaesthesia. Conclusions: For patients with mild to moderate dyspnoea suspected of PTL, FNAC along with FCI and CB-ICC or CNB along with IHC are recommended, in addition to prompt chemotherapy to avoid prophylactic tracheostomy. Patients with moderate to severe dyspnoea suspected of PTL should undergo tracheal intubation under the guidance of a fibreoptic bronchoscope without general anaesthesia, followed by tracheostomy with simultaneous thyroid incisional biopsy to reduce the risk of asphyxia during treatment.

Relative efficacy of prophylactic strategies for postthyroidectomy hypocalcemia: a systematic review and network meta-analysis.

BACKGROUND: Routine prophylaxis for at-risk patients may reduce the occurrence of postoperative hypocalcemia but is not widely adopted due to a lack of evidence on the efficacy of available prophylactic strategies. In this study, we compared the relative efficacy of prophylactic strategies for postthyroidectomy hypocalcemia with a systematic review and network meta-analysis. METHODS: PubMed, Embase, and Cochrane Library were searched, covering the period from 1980 to May 2022, for randomized controlled trials (RCTs) comparing calcium, vitamin D 3 , activated vitamin D 3 , teriparatide, steroids, and magnesium with placebo or each other in patients receiving total or completion thyroidectomy. Involved RCTs reporting symptomatic or biochemical hypocalcemia. The primary outcome was symptomatic hypocalcemia, defined as circumoral tingling, and Chvostek and Trousseau signs. The secondary outcome was biochemical hypocalcemia. Risk of bias was assessed using the Cochrane risk of bias assessment tool for randomized trials. Pooled estimates were calculated using a random-effects inverse-variance weighting model. The network meta-analysis was performed under the frequentist framework. This meta-analysis was registered on the PROSPERO (International prospective register of systematic reviews) (CRD42022299982). RESULTS: Twenty-seven RCTs comprising 3382 patients are included. Prophylactic strategies of teriparatide, oral calcium plus vitamin D 3 , and oral calcium plus activated vitamin D 3 are superior to placebo in reducing symptomatic hypocalcemia. Teriparatide emerged as the most effective strategy for symptomatic hypocalcemia [relative risk (RR): 0.18; 95% CI: 0.03-0.98], followed by oral calcium plus activated vitamin D 3 (RR: 0.42; 95% CI: 0.25-0.73) and oral calcium plus vitamin D 3 (RR: 0.43; 95% CI: 0.26-0.71). Evidence on monotherapy with either oral calcium or vitamin D 3 in reducing symptomatic hypocalcemia is insufficient. Intravenous calcium and oral calcium are effective in reducing biochemical hypocalcemia. CONCLUSIONS: This network meta-analysis provides information on the relative efficacy of current prophylactic strategies for postthyroidectomy hypocalcemia. Teriparatide performed better than other interventions and would seem appropriate for deployment among high-risk populations.

Medial-lateral translational malalignment of the prosthesis on tibial stress distribution in total knee arthroplasty: A finite element analysis.

Background: Poor prosthesis alignment during total knee arthroplasty could cause problems such as polyethylene spacer wear, leading to surgical failure and revision surgery. The problems caused by the malalignment of the tibial plateau prosthesis in the medial and lateral planes are unclear. We aimed to investigate the stress distribution and micromotion of the tibia when the tibial plateau prosthesis is translated 1 and 2 mm medially and laterally, respectively, using finite element analysis (FEA). Method: A non-homogeneous tibia model was created and load conditions when standing on two legs were applied using FEA to simulate the misaligned prosthesis. The stresses, stress distribution, and micromotion of the proximal tibia were analyzed in five positions of the tibial plateau prosthesis: Lateral-2 mm; Lateral-1 mm; Medium; Medial-2 mm; Medial-1 mm. Result: The maximum stress in the five groups with different misalignments of the platform was 47.29 MPa (Lateral-2 mm). The maximum micromotion among the five groups in different positions was 7.215 µm (Lateral-2 mm). Conclusion: When placing the tibial plateau prosthesis during total knee arthroplasty, an error of 2 mm or less is acceptable as long as it does not overhang.

The influence of body weight index on initial stability of uncemented femoral knee protheses: A finite element study.

Background and objective: Obesity is one of the risk factors for osteoarthritis. The end-stage treatment for osteoarthritis is total knee arthroplasty (TKA). However, it remains controversial whether a high body mass index (BMI) affects the initial stability of the femoral prosthesis after TKA. Finite element analysis (FEA) was used to investigate this question in this study. Methods: Four femur models that assembled with TKA femoral components were reconstructed and divided into high BMI group and normal BMI group. The three-dimensional femurs were modeled and assigned inhomogeneous materials based on computed tomography (CT) images. Then each FEA model was applied with gait and deep bend loading conditions to evaluate the maximum principal strain on the distal femur and the relative micromotion between the femur and prosthesis. Results: The mean strain of the high BMI group increased by 32.7% (936.9 µÎµ versus 706.1 µÎµ) and 50.9% (2064.5 µÎµ versus 1368.2 µÎµ) under gait and deep bend loading conditions, respectively, compared to the normal BMI group. Meanwhile, the mean micromotion of the high BMI group increased by 41.6% (2.77 µm versus 1.96 µm) and 58.5% (62.1 µm versus 39.2 µm), respectively. Under gait condition, the maximum micromotion for high BMI group was 33.8 µm and would compromise the initial stability. Under deep bend condition, the maximum strain and micromotion exceeded -7300 µÎµ and 28 µm for both groups. Conclusion: High BMI caused higher strain on the bone and higher micromotion between the prosthesis and the femur. Gait activities could be risky for prosthesis stability in high BMI group while be safe in normal group. Deep bend activities were highly dangerous for both groups with high BMI and normal BMI and should be avoided.

Biomechanical analysis of customized cage conforming to the endplate morphology in anterior cervical discectomy fusion: A finite element analysis.

In anterior cervical discectomy and fusion (ACDF), an interbody fusion device is an essential implant. An unsuitable interbody fusion device can cause postoperative complications, including subsidence and nonunion. We designed a customized intervertebral fusion device to reduce postoperative complications and validated it by finite element analysis. Herein, we built a non-homogeneous model of the C3-7 cervical spine. Three implant models (customized cage, commercial cage, and bone graft cage) were constructed and placed in the C45 cervical segment after ACDF surgery. The simulated range of motion (ROM), stress at the cage-bone interface, and stress on the cage and implants were compared under different conditions. The commercial cage showed maximum stress peaks at 40.3 MPa and 43.2 MPa in the inferior endplate of C4 and superior endplate of C5 under rotational conditions, higher compared to 29.7 MPa and 26.4 MPa, respectively, in the customized cage. The ROM was not significantly different between the three cages placed after ACDF. The stresses on the commercial cage were higher compared to the other two cages under all conditions. The bone graft in the customized cage was subject to higher stress than the commercial cage under all conditions, particularly lateral bending, wherein the maximum stress was 5.5 MPa. These results showed that a customized cage that better conformed to the vertebral anatomy was promising for reducing the risk of stress shielding and the occurrence of subsidence.

Artificial lamina after laminectomy: Progress, applications, and future perspectives.

In clinical practice, laminectomy is a commonly used procedure for spinal decompression in patients suffering from spinal disorders such as ossification of ligamentum flavum, lumbar stenosis, severe spinal fracture, and intraspinal tumors. However, the loss of posterior column bony support, the extensive proliferation of fibroblasts and scar formation after laminectomy, and other complications (such as postoperative epidural fibrosis and iatrogenic instability) may cause new symptoms requiring revision surgery. Implantation of an artificial lamina prosthesis is one of the most important methods to avoid post-laminectomy complications. Artificial lamina is a type of synthetic lamina tissue made of various materials and shapes designed to replace the resected autologous lamina. Artificial laminae can provide a barrier between the dural sac and posterior soft tissues to prevent postoperative epidural fibrosis and paravertebral muscle compression and provide mechanical support to maintain spinal alignment. In this paper, we briefly review the complications of laminectomy and the necessity of artificial lamina, then we review various artificial laminae from clinical practice and laboratory research perspectives. Based on a combination of additive manufacturing technology and finite element analysis for spine surgery, we propose a new designing perspective of artificial lamina for potential use in clinical practice.

Porous metal block based on topology optimization to treat distal femoral bone defect in total knee revision.

Metal block augmentations are common solutions in treating bone defects of total knee revision. However, the stress shielding and poor osteointegration resulted from metal block application could not be neglected in bone defects restoration. In this study, a novel porous metal block was designed with topology optimization to improve biomechanical performance. The biomechanical difference of the topologically optimized block, solid Ti6Al4V block, and porous Ti6Al4V block in treating bone defects of total knee revision was compared by finite element analysis. The inhomogeneous femoral model was created according to the computed tomography data. Combined with porous structures, minimum compliance topology optimization subjected to the volume fraction constraint was utilized for the redesign of the metal block. The region of interest was defined as a 10 mm area of the distal femur beneath the contacting surface. The biomechanical performance of daily motions was investigated. The von Mises stress, the strain energy density of the region of interest, and the von Mises stress of metal blocks were recorded. The results were analyzed in SPSS. In terms of the region of interest, the maximum von Mises stress of the topological optimized group increased obviously, and its average stress was significantly higher than that of the other groups (p < 0.05). Moreover, the topologically optimized block group had the highest maximum strain energy density of the three groups, and the lowest maximum stress of block was also found in this group. In this study, the stress shielding reduction and stress transfer capability were found obviously improved through topology optimization. Therefore, the topological optimized porous block is recommended in treating bone defects of total knee revision. Meanwhile, this study also provided a novel approach for mechanical optimization in block designing.

Biomechanical effects of individualized artificial titanium alloy lamina implantation after laminectomy: A finite element analysis.

Background and objectives: Laminectomy is a common surgical procedure in spine surgery. However, disruption of the posterior ligamentous complex of the spine may lead to a range of postoperative complications. Artificial lamina as a kind of bionic implant can well restore the posterior spinal structure. In this study, an individualized artificial titanium alloy lamina was designed to reconstruct the posterior spinal structure after laminectomy and explored its biomechanical effects, which could provide a theoretical basis for the clinical application of the artificial lamina. Methods: Three finite element models were constructed, namely the nonlinear and non-homogeneous intact model of the whole lumbar spine, the lumbar decompression alone surgical model, and the artificial lamina implantation surgical model. The range of motion, intradiscal pressure, and annulus fibrosus peak stress were compared between the three models at the surgical and adjacent segments. The stresses of the artificial lamina and fixation screws were also analyzed for the four movement states. Results: Compared with the intact model, the lumbar decompression alone surgical model showed an increase in range of motion, intradiscal pressure, and annulus fibrosus peak stresses at the surgical segment and adjacent segments under all conditions. The artificial lamina implantation surgical model showed an increase in these measurements only in flexion, increasing by 7.5%-22.5%, 7.6%-17.9%, and 6.4%-19.3%, respectively, over the intact model, while there was little difference under other conditions. The peak stresses in both the screw and the artificial lamina were highest in axial rotation, i. e. 46.53 MPa and 53.84 MPa, respectively. Screw stresses were concentrated on the connection between the screw and the artificial lamina, and artificial lamina stresses were concentrated on the spinous root, around the screw hole, and the contact with the vertebral body. Conclusion: An individualized artificial titanium alloy lamina can effectively reduce the range of motion, intradiscal pressure, and annulus fibrosus stress at the surgical segment and adjacent segments. The application of artificial lamina could better preserve the biomechanical properties of the intact lumbar spine and reduce the risk of adjacent segmental disease.

Cause analysis of the liner dissociation of a customized reverse shoulder prosthesis based on finite element analysis.

Background: Dissociation of the polyethylene liner after reverse shoulder arthroplasty could cause shoulder dislocation that could not achieve closed reduction. The cause of liner dissociation is currently unclear. Method: Non-homogeneous model of the bone was constructed and dynamic finite element analysis was utilized to simulate the impingement of the polyethylene liner and scapula during humeral adduction. The stress distribution of the fixation claws, their degree of deformation (DOD), and the stress of the impingement sites in three initial humeral postures (neutral, 30° flexion, and 30° extension) were measured and analyzed. The influence of the liner material stiffness was also investigated. Result: The impingement stress on the liner and scapula was 100-200 MPa, and different humeral postures caused different locations of impingement points. The fixation claws' maximum principal stress (MPS) results were below 5 MPa. In the connection area between some fixation claws and the liner, compressive stresses on the inside and tensile stresses on the outside were observed, which showed that the fixation claws were prone to deform toward the center direction. The maximum DOD results of three initial humeral postures (neutral, 30° flexion, and 30° extension) were 3.6%, 2.8%, and 3.5%, respectively. The maximum DOD results of neutral initial humeral posture were 0.51% and 11.4% when the elastic modulus of the liner was increased and decreased by a factor of 10, respectively. Conclusion: The humeral adduction impingement could lead to the deformation of the claw-shaped liner fixation structure, which might be one of the reasons for the liner dissociation. The increased stiffness of the liner material helped to reduce the deformation of the fixation structure.