Simultaneously Improved Activity and Stability for Acidic Water Oxidation of IrRu Oxides by a Dual Role of Tungsten Doping.

Acidic oxygen evolution reaction (OER) remains a significant challenge due to the low activity and/or poor stability of the catalysts, even with state-of-the-art catalysts such as IrO2 and RuO2. Herein, we propose a strategy to enhance both the catalytic activity and stability of IrRu oxides for acidic OER by doping non-noble metal W. The W-doped IrRu3Ox (W-IrRu3Ox) undergoes a process of W leaching and reconstruction during the OER, leading to a more uniform distribution of elements, while the electronegative nature of W influences the electronic structures of Ir and Ru in W-IrRu3Ox. The dual role of W in promoting the formation of active site Ir5+ and inhibiting the concentration of soluble Ru>4+ ions results in a synergistic enhancement of both the activity and stability of acidic OER. Remarkably, W-IrRu3Ox exhibits outstanding catalytic activity for the OER in 0.5 M H2SO4, with a high stability of more than 500 h. This work presents a novel and feasible strategy for the development of efficient and stable catalysts for acid OER, shedding light on the design of advanced electrocatalysts for energy conversion and storage applications.

Surface Reconstruction and Passivation of BiVO4 Photoanodes Depending on the "Structure Breaker" Cs.

Monoclinic BiVO4 is one of the most promising photoanode materials for solar water splitting. The photoelectrochemical performance of a BiVO4 photoanode could be significantly influenced by the noncovalent interactions of redox-inert metal cations at the photoanode-electrolyte interfaces, but this point has not been well investigated. In this work, we studied the Cs+-dependent surface reconstruction and passivation of BiVO4 photoanodes. Owing to the "structure breaker" nature of Cs+, the Cs+ at the BiVO4 photoanode-electrolyte interfaces participated in BiVO4 surface photocorrosion to form a Cs+-doped bismuth vanadium oxide amorphous thin layer, which inhibited the continuous photocorrosion of BiVO4 and promoted surface charge transfer and water oxidation. The resulting cocatalyst-free BiVO4 photoanodes achieved 3.3 mA cm-2 photocurrent for water oxidation. With the modification of FeOOH catalysts, the photocurrent at 1.23 VRHE reached 5.1 mA cm-2, and a steady photocurrent of 3.0 mA cm-2 at 0.8 VRHE was maintained for 30 h. This work provides new insights into the understanding of Cs+ chemistry and the effects of redox-inert cations at the electrode-electrolyte interfaces.

Indium Cyanamide for Industrial-Grade CO2 Electroreduction to Formic Acid.

Developing industrial-grade electroreduction of CO2 to produce formate (HCOO-)/formic acid (HCOOH) depends on highly active electrocatalysts. However, structural changes due to the inevitable self-reduction of catalysts result in severe long-term stability issues at industrial-grade current density. Herein, linear cyanamide anion ([NCN]2-)-constructed indium cyanamide nanoparticles (InNCN) were investigated for CO2 reduction to HCOO- with a Faradaic efficiency of up to 96% under a partial current density (jformate) of 250 mA cm-2. Bulk electrolysis at a jformate of 400 mA cm-2 requires only -0.72 VRHE applied potential with iR correction. It also achieves continuous production of pure HCOOH at ∼125 mA cm-2 for 160 h. The excellent activity and stability of InNCN are attributed to its unique structural features, including strongly σ-donating [NCN]2- ligands, the potential structural transformation of [N═C═N]2- and [N≡C-N]2-, and the open framework structure. This study affirms metal cyanamides as promising novel materials for electrocatalytic CO2 reduction, broadening the variety of CO2 reduction catalysts and the understanding of structure-activity relationships.

Promoting Proton Transfer and Stabilizing Intermediates in Catalytic Water Oxidation via Hydrophobic Outer Sphere Interactions.

The outer coordination sphere of metalloenzyme often plays an important role in its high catalytic activity, however, this principle is rarely considered in the design of man-made molecular catalysts. Herein, four Ru-bda (bda=2,2'-bipyridine-6,6'-dicarboxylate) based molecular water oxidation catalysts with well-defined outer spheres are designed and synthesized. Experimental and theoretical studies showed that the hydrophobic environment around the Ru center could lead to thermodynamic stabilization of the high-valent intermediates and kinetic acceleration of the proton transfer process during catalytic water oxidation. By this outer sphere stabilization, a 6-fold rate increase for water oxidation catalysis has been achieved.

Sacrificial W Facilitates Self-Reconstruction with Abundant Active Sites for Water Oxidation.

Water oxidation is an important reaction for multiple renewable energy conversion and storage-related devices and technologies. High-performance and stable electrocatalysts for the oxygen evolution reaction (OER) are urgently required. Bimetallic (oxy)hydroxides have been widely used in alkaline OER as electrocatalysts, but their activity is still not satisfactory due to insufficient active sites. In this research, A unique and efficient approach of sacrificial W to prepare CoFe (oxy)hydroxides with abundant active species for OER is presented. Multiple ex situ and operando/in situ characterizations have validated the self-reconstruction of the as-prepared CoFeW sulfides to CoFe (oxy)hydroxides in alkaline OER with synchronous W etching. Experiments and theoretical calculations show that the sacrificial W in this process induces metal cation vacancies, which facilitates the in situ transformation of the intermediate metal hydroxide to CoFe-OOH with more high-valence Co(III), thus creating abundant active species for OER. The Co(III)-rich environment endows the in situ formed CoFe oxyhydroxide with high catalytic activity for OER on a simple flat glassy carbon electrode, outperforming those not treated by the sacrificial W procedure. This research demonstrates the influence of etching W on the electrocatalytic performance, and provides a low-cost means to improve the active sites of the in situ self-reconstructed bimetallic oxyhydroxides for OER.

Off-Set Interactions of Ruthenium-bda Type Catalysts for Promoting Water-Splitting Performance.

O-O bond formation with Ru(bda)L2 -type catalysts is well-known to proceed through a bimolecular reaction pathway, limiting the potential application of these catalysts at low concentrations. Herein, we achieved high efficiencies with mononuclear catalysts, with TOFs of 460±32 s-1 at high catalyst loading and 31±3 s-1 at only 1 µM catalyst concentration, by simple structural considerations on the axial ligands. Kinetic and DFT studies show that introduction of an off-set in the interaction between the two catalytic units reduces the kinetic barrier of the second-order O-O bond formation, maintaining high catalytic activity even at low catalyst concentrations. The results herein furthermore suggest that π-π interactions may only play a minor role in the observed catalytic activity, and that asymmetry can also rationalize high activity observed for Ru(bda)(isoq)2 type catalysts and offer inspiration to overcome the limitations of 2nd order catalysis.

Electrostatic Interactions Accelerating Water Oxidation Catalysis via Intercatalyst O-O Coupling.

Intercatalyst coupling has been widely applied in the functional mimics for binuclear synergy in natural metal enzymes. Herein, we introduce two facile and effective design strategies, which facilitate the coupling of two catalytic units via electrostatic interactions. The first system is based on a catalyst molecule functionalized with both a positively charged and a negatively charged group in the structure being able to pair with each other in an antiparallel manner arranged by electrostatic interactions. The other system consists of a mixture of two different of catalysts modified with either positively or negatively charged groups to generate intermolecular electrostatic interactions. Applying these designs to Ru(bda) (H2bda = 2,2'-bipyridine-6,6'-dicarboxylic acid) water-oxidation catalysts improved the catalytic performance by more than an order of magnitude. The intermolecular electrostatic interactions in these two systems were fully identified by 1H NMR, TEM, SAXS, and electrical conductivity experiments. Molecular dynamics simulations further verified that electrostatic interactions contribute to the formation of prereactive dimers, which were found to play a key role in dramatically improving the catalytic performance. The successful strategies demonstrated here can be used in designing other intercatalyst coupling systems for activation and formation of small molecules and organic synthesis.

Electronic Influence of the 2,2'-Bipyridine-6,6'-dicarboxylate Ligand in Ru-Based Molecular Water Oxidation Catalysts.

Water provides an ideal source for the production of protons and electrons required for generation of renewable fuels. Among the most-prominent electrocatalysts capable of water oxidation at low overpotentials are Ru(bda)L2-type catalysts. Although many studies were dedicated to the investigation of the influence of structural variations, the true implication of the bda backbone on catalysis remains mostly unclarified. In this work, we further investigated if electronic effects are contributing to catalysis by Ru(bda)(pic)2 or if the intrinsic catalytic activity mainly originates from the structural features of the ligand. Through introduction of pyrazines in the bda backbone, forming Ru(N1-bda)(pic)2 and Ru(N2-bda)(pic)2, electronic differences were maximized while minimizing changes in the geometry and other intermolecular interactions. Through a combination of electrochemical analysis, chemical oxygen evolution, and density functional theory calculations, we reveal that the catalytic activity is unaffected by the electronic features of the backbone and that the unique bimolecular reactivity of the Ru(bda)L2 family of catalysts thus purely depends on the spatial geometry of the ligand.

Molecular Functionalization of NiO Nanocatalyst for Enhanced Water Oxidation by Electronic Structure Engineering.

Tuning the local environment of nanomaterial-based catalysts has emerged as an effective approach to optimize their oxygen evolution reaction (OER) performance, yet the controlled electronic modulation around surface active sites remains a great challenge. Herein, directed electronic modulation of NiO nanoparticles was achieved by simple surface molecular modification with small organic molecules. By adjusting the electronic properties of modifying molecules, the local electronic structure was rationally tailored and a close electronic structure-activity relationship was discovered: the increasing electron-withdrawing modification readily decreased the electron density around surface Ni sites, accelerating the reaction kinetics and improving OER activity, and vice versa. Detailed investigation by operando Raman spectroelectrochemistry revealed that the electron-withdrawing modification facilitates the charge-transfer kinetics, stimulates the catalyst reconstruction, and promotes abundant high-valent γ-NiOOH reactive species generation. The NiO-C6 F5 catalyst, with the optimized electronic environment, exhibited superior performance towards water oxidation. This work provides a well-designed and effective approach for heterogeneous catalyst fabrication under the molecular level.

Organic Salts as p-Type Dopants for Efficient LiTFSI-Free Perovskite Solar Cells.

Despite the ubiquity and importance of organic hole-transport materials in photovoltaic devices, their intrinsic low conductivity remains a drawback. Thus, chemical doping is an indispensable solution to this drawback and is essentially always required. The most widely used p-type dopant, FK209, is a cobalt coordination complex. By reducing Co(III) to Co(II), Spiro-OMeTAD becomes partially oxidized, and the film conductivity is initially increased. In order to further increase the conductivity, the hygroscopic co-dopant LiTFSI is typically needed. However, lithium salts are normally quite hygroscopic, and thus, water absorption has been suggested as a significant reason for perovskite degradation and therefore limited device stability. In this work, we report a LiTFSI-free doping process by applying organic salts in relatively high amounts. The film conductivity and morphology have been studied at different doping amounts. The resulting solar cell devices show comparable power conversion efficiencies to those based on conventional LiTFSI-doped Spiro-OMeTAD but show considerably better long-term device stability in an ambient atmosphere.

Single crystal structure and opto-electronic properties of oxidized Spiro-OMeTAD.

Single crystals of Spiro(TFSI)2 were grown, the optical and electronic properties were characterized and compared with neutral Spiro-OMeTAD. Density-functional theory was used to get insights into binding and band structure properties. The flat valence bands indicate a rather limited orbital overlap in Spiro(TFSI)2.

Efficient BiVO4 Photoanodes by Postsynthetic Treatment: Remarkable Improvements in Photoelectrochemical Performance from Facile Borate Modification.

Water-splitting photoanodes based on semiconductor materials typically require a dopant in the structure and co-catalysts on the surface to overcome the problems of charge recombination and high catalytic barrier. Unlike these conventional strategies, a simple treatment is reported that involves soaking a sample of pristine BiVO4 in a borate buffer solution. This modifies the catalytic local environment of BiVO4 by the introduction of a borate moiety at the molecular level. The self-anchored borate plays the role of a passivator in reducing the surface charge recombination as well as that of a ligand in modifying the catalytic site to facilitate faster water oxidation. The modified BiVO4 photoanode, without typical doping or catalyst modification, achieved a photocurrent density of 3.5 mA cm-2 at 1.23 V and a cathodically shifted onset potential of 250 mV. This work provides an extremely simple method to improve the intrinsic photoelectrochemical performance of BiVO4 photoanodes.

Across the Board: Licheng Sun on the Mechanism of O-O Bond Formation in Photosystem†II.

In this series of articles, the board members of ChemSusChem discuss recent research articles that they consider of exceptional quality and importance for sustainability. This entry features Prof. L. Sun, who proposes a special mechanism for O-O bond formation in photosystem II with involvement of an MnVII -oxo species induced by charge- and structural rearrangements. In this viewpoint, Proton transfer is involved in changes of the first coordination spheres around the MnVII -oxo site on the dangling Mn4 with de- and re-coordination of carboxylates (Glu333 and Asp170).

Paired Electrocatalytic Oxygenation and Hydrogenation of Organic Substrates with Water as the Oxygen and Hydrogen Source.

The use of water as an oxygen and hydrogen source for the paired oxygenation and hydrogenation of organic substrates to produce valuable chemicals is of utmost importance as a means of establishing green chemical syntheses. Inspired by the active Ni3+ intermediates involved in electrocatalytic water oxidation by nickel-based materials, we prepared NiBx as a catalyst and used water as the oxygen source for the oxygenation of various organic compounds. NiBx was further employed as both an anode and a cathode in a paired electrosynthesis cell for the respective oxygenation and hydrogenation of organic compounds, with water as both the oxygen and hydrogen source. Conversion efficiency and selectivity of ≥99 % were observed during the oxygenation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid and the simultaneous hydrogenation of p-nitrophenol to p-aminophenol. This paired electrosynthesis cell has also been coupled to a solar cell as a stand-alone reactor in response to sunlight.

Artificial photosynthesis: opportunities and challenges of molecular catalysts.

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Ru-bda: Unique Molecular Water-Oxidation Catalysts with Distortion Induced Open Site and Negatively Charged Ligands.

A water-oxidation catalyst with high intrinsic activity is the foundation for developing any type of water-splitting device. To celebrate its 10 years anniversary, in this Perspective we focus on the state-of-the-art molecular water-oxidation catalysts (MWOCs), the Ru-bda series (bda = 2,2'-bipyridine-6,6'-dicarboxylate), to offer strategies for the design and synthesis of more advanced MWOCs. The O-O bond formation mechanisms, derivatives, applications, and reasons behind the outstanding catalytic activities of Ru-bda catalysts are summarized and discussed. The excellent performance of the Ru-bda catalyst is owing to its unique structural features: the distortion induced 7-coordination and the carboxylate ligands with coordination flexibility, proton-transfer function as well as small steric hindrance. Inspired by the Ru-bda catalysts, we emphasize that the introduction of negatively charged groups, such as the carboxylate group, into ligands is an effective strategy to lower the onset potential of MWOCs. Moreover, distortion of the regular configuration of a transition metal complex by ligand design to generate a wide open site as the catalytic site for binding the substrate as an extra-coordination is proposed as a new concept for the design of efficient molecular catalysts. These inspirations can be expected to play a great role in not only water-oxidation catalysis but also other small molecule activation and conversion reactions involving artificial photosynthesis, such as CO2 reduction and N2 fixation reactions.

Iron-Based Molecular Water Oxidation Catalysts: Abundant, Cheap, and Promising.

An efficient and robust water oxidation catalyst based on abundant and cheap materials is the key to converting solar energy into fuels through artificial photosynthesis for the future of humans. The development of molecular water oxidation catalysts (MWOCs) is a smart way to achieve promising catalytic activity, thanks to the clear structures and catalytic mechanisms of molecular catalysts. Efficient MWOCs based on noble-metal complexes, for example, ruthenium and iridium, have been well developed over the last 30 years; however, the development of earth-abundant metal-based MWOCs is very limited and still challenging. Herein, the promising prospect of iron-based MWOCs is highlighted, with a comprehensive summary of previously reported studies and future research focus in this area.

Identifying MnVII-oxo Species during Electrochemical Water Oxidation by Manganese Oxide.

Identifying surface active intermediate species is essential to reveal the catalytic mechanism of water oxidation by metal-oxides-based catalysts and to develop more efficient catalysts for oxygen-oxygen bond formation. Here we report, through electrochemical methods and ex situ infrared spectroscopy, the identification of a MnVII = O intermediate during catalytic water oxidation by a c-disordered δ-MnOx with an onset-potential-dependent reduction peak at 0.93 V and an infrared peak at 912 cm-1. This intermediate is proved to be highly reactive and much more oxidative than permanganate ion. Therefore, we propose a new catalytic mechanism for water oxidation catalyzed by Mn oxides, with involvement of the MnVII = O intermediate in a resting state and the MnIV-O-MnVII = O as a real active species for oxygen-oxygen bond formation.