Synthesis, DNA binding, antibacterial and anticancer properties of two novel water-soluble copper(II) complexes containing gluconate.

In this paper, two new Cu(II) complexes, [Cu(Gluc)(HPB)(H2O)]Gluc (CuG1) and [Cu(Gluc)(HPBC)(H2O)]Gluc (CuG2) (where HPB = 2-(2'-pyridyl)benzimidazole, HPBC = 5-chloro-2-(2'-pyridyl)benzimidazole, Gluc = d-Gluconic acid), with good water solubility were synthesized and characterized. These complexes exhibited a five-coordinated tetragonal pyramidal geometry. The DNA binding and cleavage properties of the complexes were investigated using multi-spectroscopy, viscosity measurement, molecular docking and gel electrophoresis analysis methods. The results showed that the complexes could interact with DNA by insertion and groove binding, and cleave CT-DNA through a singlet oxygen-dependent pathway in the presence of ascorbic acid. The studies on antibacterial and anticancer activities in vitro demonstrated that both complexes had good inhibitory activity against three Gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis, Listeria monocytogenes) and one Gram-negative bacterium (Escherichia coli) and good cytotoxic activity toward the tested cancer cells (A549, HeLa and SGC-7901). CuG2 showed higher antimicrobial and cytotoxic activities than CuG1, which was consistent with their binding strength and cleavage ability to DNA, indicating that their antimicrobial and cytotoxic activities may be related to the DNA interaction. Moreover, the cell-based mechanism studies have indicated that CuG1 and CuG2 could arrest the cell cycle at G2/M phase, elevate the levels of intracellular reactive oxygen species (ROS) and decrease the mitochondrial membrane potential (MMP). The results showed that the complexes could induce apoptosis through DNA-damaged and ROS-mediated mitochondrial dysfunction pathways. Finally, the in vivo antitumor study revealed that CuG2 inhibited tumor growth by 50.44%, which is better than that of cisplatin (40.94%).

Synthesis, characterization, DNA/HSA interactions and in vitro cytotoxic activities of two novel water-soluble copper(II) complexes with 1,3,5-triazine derivative ligand and amino acids.

Two water-soluble copper(II) complexes of 6-(pyrazin-2-yl)-1,3,5-triazine-2,4-diamine (pzta) and amino acids, [Cu(pzta)(L-ArgH)(H2O)](ClO4)2 (1) and [Cu(pzta)(L-Met)(H2O)]ClO4·3H2O (2) (L-ArgH: protonated L-Argininate; L-Met: L-Methioninate), were synthesized and characterized. The determined X-ray crystallographic structures of 1 and 2 exhibited distorted square-pyramidal coordination geometries. Their binding properties toward calf thymus DNA (CT-DNA) and human serum protein (HSA) were measured by spectroscopic (UV-Vis, fluorescence, circular dichroism (CD)), calorimetric (isothermal titration calorimetry (ITC)) and molecular docking technology. DNA binding experiments showed that the complexes bound to DNA through a groove binding mode, the positive ΔH and ΔS values indicated that the hydrophobic interaction was the main force in the binding between the complexes and DNA. Besides, the complexes caused the fluorescence quenching of HSA through a static quenching procedure, changed the secondary structure and microenvironment of the Trp-214 residue, and preferably bound to subdomain IIA of HSA driven by hydrophobic and hydrogen-bond interactions. These results were further verified by the molecular docking technology. Furthermore, the in vitro cytotoxicities of the complexes against three human carcinoma cell lines (A549, PC-3 and HeLa) were evaluated, which confirmed that the complexation improved the anticancer activity of the pzta ligand significantly.

Sensitive amperometric detection of riboflavin with a whole-cell electrochemical sensor.

A novel whole-cell electrochemical sensor was developed and applied for sensitive amperometric detection of riboflavin. In this work, a whole-cell based riboflavin redox cycling system was characterized, in which electroactive bacteria Shewanella oneidensis MR-1 was employed as the biocatalyst to regenerate the reduced riboflavin after the electrode oxidation. This redox cycling system efficiently enhanced the electrochemical response of riboflavin and enabled a stable current output at poised electrode potential. Thus, a sensitive amperometric biosensing system for riboflavin detection was developed by integrating this whole-cell redox cycling system with the conventional riboflavin electrochemical sensor. Remarkably, this riboflavin biosensor exhibited high sensitivity (LOD = 0.85 ± 0.09 nM, S/N = 3), excellent selectivity and stability. Additionally, reliable analysis of real samples (food and pharmaceutical samples) by this biosensor was achieved. This work provided sensitive and practical tool for riboflavin detection, and demonstrated that the integration of electroactive bacteria and using its outwards electron transfer for redox cycling would be a powerful and promising strategy to improve the performance of electrochemical sensing system.

Amplification of electrochemical signal by a whole-cell redox reactivation module for ultrasensitive detection of pyocyanin.

A bioelectrochemical sensing system based on a novel whole-cell redox reactivation/cycling module for ultrasensitive detection of pyocyanin (the biomarker of Pseudomonas aeruginosa infections) was developed. The electroactive bacteria mediated redox reactivation module was constructed using Shewanella oneidensis MR-1 cells as the bioelectro-catalyst and lactate as the electron donor. It could regenerate reductive pyocyanin from its oxidative state, which enabled pyocyanin molecule repeatedly registered by the electrode. Uniquely, with this redox reactivation module, the electrochemical response of pyocyanin was amplified about 405 times (1.3 µA/nM vs. 3.2nA/nM). Thus, an ultrasensitive bioelectrochemical sensing system for pyocyanin quantification was developed by integrating the pyocyanin reactivation module with conventional electrochemical detection system. Remarkably, with this developed biosensing system, an extremely low LOD of 47±1pM was reached. Additionally, this biosensing system showed excellent resistance to interferences from human fluids or bacterial contamination. This work provided a simple, ultrasensitive and robust tool for pyocyanin detection, and more importantly, demonstrated a new dimension for electrochemical signal amplification in biosensing.

In-situ growth of graphene/polyaniline for synergistic improvement of extracellular electron transfer in bioelectrochemical systems.

Graphene composite has been widely used in various bioelectrochemical systems (BES). However, it is suffered from tedious fabrication procedure and ambiguous mechanism for its effect on BES. Here, a one-step and in-situ strategy for simultaneously graphene exfoliation and aniline polymerization was developed for fabrication of graphene/PANI composite electrode (GO/PANIOS). This GO/PANIOS outperformed graphite paper (GP), GP with PANI (GP/PANI) and GP with electrochemical exfoliated graphene (GOH2SO4) in Shewanella oneidensis MR-1 inoculated BES (improved the power density output, i.e., 24, 3.4 and 5.7 times of GP , GP/PANI and GOH2SO4, respectively). Further analysis revealed a synergistic improvement on both direct and mediated extracellular electron transfer of S. oneidensis MR-1 by GO/PANIOS contributed to its performance enhancement in BES. This work not only provided a simple strategy for graphene composite fabrication, but also unveiled the underlying mechanism for its stimulation on BES, which promises new opportunity of graphene composite application in various biosystems.

Wiring Bacterial Electron Flow for Sensitive Whole-Cell Amperometric Detection of Riboflavin.

A whole-cell bioelectrochemical biosensing system for amperometric detection of riboflavin was developed. A "bioelectrochemical wire" (BW) consisting of riboflavin and cytochrome C between Shewanella oneidensis MR-1 and electrode was characterized. Typically, a strong electrochemical response was observed when riboflavin (VB2) was added to reinforce this BW. Impressively, the electrochemical response of riboflavin with this BW was over 200 times higher than that without bacteria. Uniquely, this electron rewiring process enabled the development of a biosensing system for amperometric detection of riboflavin. Remarkably, this amperometric method showed high sensitivity (LOD = 2.2 nM, S/N = 3), wide linear range (5 nM ∼ 10 µM, 3 orders of magnitude), good selectivity, and high resistance to interferences. Additionally, the developed amperometric method featured good stability and reusability. It was further applied for accurate and reliable determination of riboflavin in real conditions including food, pharmaceutical, and clinical samples without pretreatment. Both the cost-effectiveness and robustness make this whole-cell amperometric system ideal for practical applications. This work demonstrated the power of bioelectrochemical signal amplification with exoelectrogen and also provided a new idea for development of versatile whole-cell amperometric biosensors.

Noise monitoring and adverse health effects in residents in different functional areas of Luzhou, China.

The purpose of the study was to investigate the noise pollution situation and the resulting adverse effect on residents' health in Luzhou, China, to provide data for noise pollution prevention policies and interventions. Four different functional areas (commercial, construction, residential, and transportation hub areas) were chosen to monitor noise level for 3 months. The survey was performed by questionnaire on the spot on randomly selected individuals; it collected data on the impact of noise on residents' health (quality of sleep, high blood pressure, subjective feeling of nervous system damage, and attention) as well as the knowledge of noise-induced health damage, the degree of adaptation to noise, and their solutions. The noise levels of residential, commercial, transportation, and construction areas exceeded the national standards (P < .001). Sleep quality, prevalence of hypertension, and attention in transportation hub areas were significantly different from those in the other 3 areas (P < .05); only 24.46% of people knew the health hazards associated with noise; 64.57% of residents have adapted to the current noise environment. Most of them have to close the doors and windows to reduce noise. The noise pollution situation in Luzhou, China, is serious, especially the traffic noise pollution. Residents pay less attention to it and adopt single measures to reduce the noise. We should work toward the prevention and control of traffic noise and improve the residents' awareness to reduce the adverse health effects of noise.

Tris[4-bromo-2-(methyl-imino-meth-yl)phenolato-κ(2) N,O]cobalt(III).

In the title compound, [Co(C8H7BrNO)3], the Co(III) ion is coordinated in a slightly distorted octa-hedral environment by three N atoms and three O atoms from three bidentate 4-bromo-2-(methyl-imino-meth-yl)phenolate ligands. The dihedral angles between the benzene rings are 82.6 (2), 57.1 (2) and 62.9 (2)°. In the crystal, mol-ecules are linked by pairs of weak C-H⋯Br hydrogen bonds, forming inversion dimers.