Activating Selenium Cathode Chemistry for Aqueous Zinc-Ion Batteries.

Aqueous rechargeable zinc-ion batteries (ARZIBs) are a promising next-generation energy-storage device by virtue of the superior safety and low cost of both the aqueous electrolyte and zinc-metal anode. However, their development is hindered by the lack of suitable cathodes with high volumetric capacity that can provide both lightweight and compact size. Herein, a novel cathode chemistry based on amorphous Se doped with transition metal Ru that mitigates the resistive surface layer produced by the side reactions between the Se cathode and aqueous electrolyte is reported. This improvement can permit high volumetric capacity in this system. Distinct from the conventional conversion mechanisms between Se and ZnSe in Se||Zn cells, this strategy realizes synchronous proton and Zn2+ intercalation/deintercalation in the Ru-doped amorphous Se||Zn half cells. Moreover, an unanticipated Zn2+ deposition/stripping process in this system further contributes to the superior electrochemical performance of this new cathode chemistry. Consequently, the Ru-doped amorphous Se||Zn half cells are found to deliver a record-high capacity of 721 mAh g-1 /3472 mAh cm-3 , and superior cycling stability of over 800 cycles with only 0.015% capacity decay per cycle. This reported work opens the door for new chemistries that can further improve the gravimetric and volumetric capacity of ARZIBs.

Heterostructured Interface Enables Uniform Zinc Deposition for High-Performance Zinc-Ion Batteries.

Zinc metal has considerable potential as a high-energy anode material for aqueous batteries due to its high theoretical capacity and environmental friendliness. However, dendrite growth and parasitic reactions at the electrode/electrolyte interface remain two serious problems for the Zn metal anode. Here, the heterostructured interface of ZnO rod array and CuZn5 layer is fabricated on the Zn substrate (ZnCu@Zn) to address these two issues. The zincophilic CuZn5 layer with abundant nucleation sites ensures the initial uniform Zn nucleation process during cycling. Meanwhile, the ZnO rod array grown on the surface of the CuZn5 layer can guide the subsequent homogeneous Zn deposition via spatial confinement and electrostatic attraction effects, leading to the dendrite-free Zn electrodeposition process. Consequently, the derived ZnCu@Zn anode exhibits an ultra-long lifespan of up to 2500 h with symmetric cells at the current density and capacity of 0.5 mA cm-2 /0.5 mA h cm-2 . Besides, a remarkable cyclability (75% retention for 2500 cycles at 2 A g-1 ) is achieved in the ZnCu@Zn||MnO2 full cell with a capacity of 139.7 mA h g-1 . This heterostructured interface with specific functional layers provides a feasible strategy for the design of high-performance metal anodes.