RESUMO
Lead halide perovskite nanocrystals (PNCs) have attracted intense attention due to their excellent optoelectronic properties. In this work, a series of water-stable CsPb(Br/I)3PNCs fluorescent probes were prepared using an anion exchange method. It was found that the PNCs probes could be used to detect ascorbic acid (AA) in water, and interestingly, the FL spectra of the PNCs probes can be adjusted by controlling the concentration of KI in anion exchange to improve the detection selectivity of AA. The high sensitivity and selectivity make CsPb(Br/I)3PNCs an ideal material for AA sensing. The concentration of AA can be linearly measured in the range from 0.01 to 50µM, with a detection limit of 4.2 nM. The reason for the enhanced FL of CsPb(Br/I)3PNCs was studied, and it is considered that AA causes the aggregation of CsPb(Br/I)3PNCs. This strategy of improving the selectivity of the probe to the substrate by adjusting the spectrum will significantly expand the application of PNCs in the field of analysis and detection.
RESUMO
Lead-based perovskites are highly susceptible to environmental influences, and their application in analytical chemistry, especially in aqueous solution, has been reported rarely. All-inorganic lead-free metal halide perovskites have been considered as a substitute for lead-based perovskites. Herein, a Cs2RbTbCl6 perovskite microcrystal (PMCs), which emits strong yellow-green fluorescence with a maximum emission wavelength at 547 nm, was for the first time synthesized and characterized. The Cs2RbTbCl6 PMCs could be well dispersed in N,N-dimethylacetamide (DMF), and its fluorescence could be significantly enhanced by the addition of norfloxacin (NOR) in the aqueous solution. We found that the Cs2RbTbCl6 PMCs can be used as fluorescent probes (excitation, 365 nm; emission, 547 nm) to selectively detect NOR in a concentration range from 10.0 to 200.0 µM with the limit of detection (LOD) being 0.04 µM. The Cs2RbTbCl6 PMCs could also be adsorbed on filter paper to fabricate as a fluorescent test paper for visual detection of NOR under 365-nm ultraviolet (UV) lamp irradiation. The proposed method has the potential to establish a new analytical method to visualize the detection of NOR in aqueous environments and also promotes the application of all-inorganic lead-free perovskites for analytical detection in aqueous environments.
RESUMO
By using the method of low-temperature crystallization, CsPbBr3 perovskite nanocrystals (PNCs) coated with trifluoroacetyl lysine (Tfa-Lys) and oleamine (Olam) were synthesized in aqueous solution. The structure of the CsPbBr3 PNCs was characterized by many methods, such as ultraviolet (UV)-visible absorption spectrophotometer, fluorescence spectrophotometer, transmission electron microscopy (TEM), and X-ray diffraction (XRD) pattern. The fluorescence emission of the CsPbBr3 PNCs is stable in water for about 1 day at room temperature. It was also found that the fluorescence of the PNCs could be obviously and selectively quenched after the addition of mercury ion (Hg2+ ), allowing a visual detection of Hg2+ by the naked eye under UV light illumination. The fluorescence quenching rate (I0 /I) has a good linear relationship with the addition of Hg2+ in the concentration range 0.075 to 1.5 mg/L, with a correlation coefficient (R2 ) of 0.997, and limit of detection of 0.046 mg/L. The fluorescence quenching mechanism of the PNCs was determined by the fluorescence lifetime and X-ray photoelectron spectroscopy (XPS) of the PNCs. Overall, the synthesis method for CsPbBr3 PNCs is simple and rapid, and the as-prepared PNCs are stable in water that could be conveniently used for selective detection of Hg2+ in the water environment.
