RESUMO
This Letter presents what is to our knowledge a novel approach to reduce the digital signal processing (DSP) complexity in intensity modulation and direct detection (IM/DD) systems, which is critical for short-reach optical communication systems with severe bandwidth limitations. We propose a sub-baud rate sampling reception method utilizing a polyphase feedforward equalizer-based maximum likelihood sequence estimation (PFFE-MLSE), which could operate effectively under a sampling rate of 0.6 samples per symbol. This new architecture eliminates the need for resampling, allowing the adaptive equalizer to operate with significantly reduced complexity-over 60% compared to traditional FFE-MLSE. An offline experiment, transmitting a 100-Gbaud on-off keying (OOK) signal over a 5-km single-mode fiber (SMF) link, demonstrates the feasibility of our approach with bit error ratio (BER) meeting the KP4-forward error correction (KP4-FEC) threshold in the optical back-to-back (OBTB) scenario and 7% hard-decision FEC (HD-FEC) threshold in the 5-km SMF transmission.
RESUMO
How to measure the pointing angle precisely without the beacon light is crucial for beaconless laser communication. The conventional intensity method directly measures the intensity of a part of the communication signal beam, which has low sensitivity. We propose the characteristic signal method by superimposing a low-frequency sinusoidal signal on the communication signal to promote the measuring sensitivity. Simultaneously, a fast cyclic cross-correlation algorithm is used to reduce operational complexity. Compared with the experimental results of the direct intensity method, the proposed method can improve the measuring sensitivity about 9.17 dB and increase the power budget for communication about 1.96 dB.
RESUMO
Chromatic dispersion, which introduces pattern-dependent inter-symbol interference (ISI), appears to be a long-standing performance limiting problem in optical intensity modulation direct detection (IM/DD) transmission systems. In this paper, we propose a multiplier-free maximum likelihood sequence estimation (MLSE) equalizer for C-band double-sideband IM/DD transmission. It models the IM/DD channel with dispersion-induced ISI and Gaussian noise. A look-up table is applied to record ISI for transition probability calculation and the Viterbi algorithm for decision sequence acquisition. Specifically, to reduce the number of multipliers, a refined construction of Viterbi algorithm based on tentative path decisions is adopted, which compresses the complexity of branch metric calculation to less than 1/4 for PAM-4 format. Moreover, approximation calculation is employed to realize multiplier-free hardware implementation, which greatly reduces the hardware consumption. The proposed MLSE equalizer offers superior performance and lower complexity over conventional equalizers. In the experimental verification, we experimentally demonstrate a C-band 56-Gb/s double-sideband 4-level pulse amplitude modulation (PAM-4) IM/DD transmission over 40-km standard single mode fiber exploiting the proposed refined MLSE without any optical amplifier, filter or dispersion managed modules at the receiver end, achieving a bit-error-ratio of 2.65×10-4, which is 2.28 orders of magnitude lower than the scheme using Volterra nonlinear equalizer.
RESUMO
Chromatic dispersion appears to be a major performance limiting problem in optical intensity modulation direct detection (IM/DD) transmission systems, especially for a double-sideband (DSB) signal. We propose a complexity-reduced look-up-table based maximum likelihood sequence estimation (LUT-MLSE) for DSB C-band IM/DD transmission based on pre-decision-assisted trellis compression and a path-decision-assisted Viterbi algorithm. To further compress the size of the LUT and reduce the length of the training sequence, we proposed a finite impulse response (FIR) and LUT hybrid channel model for the LUT-MLSE. For PAM-6 and PAM-4, the proposed methods can compress the size of the LUT into 1/6 and 1/4, and reduce the number of multipliers by 98.1% and 86.6% with slight performance degradation. We successfully demonstrate a 20-km 100-Gb/s PAM-6 and a 30-km 80-Gb/s PAM-4 C-band transmission over dispersion-uncompensated links.
