[Role of Stem Cells and Their Biomimetic Matrix Microenvironment in Regenerative Repair of Articular Cartilage: A Review].

It is difficult for the articular cartilage to self-heal any damage it may incur due to its lack of nerves and blood vessels. Development in stem cell technology provides new prospects for articular cartilage regeneration. Currently, stem cells from different sources and their diverse applications have demonstrated different degrees of therapeutic effect and potential in articular cartilage repair. However, stem cells are highly sensitive to their microenvironment. Therefore, more and more researchers are focusing their attention on regulating stem cells and thus accelerating cartilage regeneration through the biomimetic microenvironment constructed by biologically functional scaffolds. We reviewed in this paper the sources of the stem cells used for cartilage repair, the application method of these stem cells, as well as the therapeutic effect, mechanism and limitations in the application of stem cells synergizing with the biomimetic microenvironment in promoting articular cartilage repair and regeneration. We hoped to provide suggestions for practical clinical research in the design and improvement of biofunctional cartilage repair scaffolds that synergize with stem cells.

PPy@MIL-100 Nanoparticles as a pH- and Near-IR-Irradiation-Responsive Drug Carrier for Simultaneous Photothermal Therapy and Chemotherapy of Cancer Cells.

A medical nanoplatform with small size, low cost, biocompatibility, good biodegradability, and, in particular, multifunctionality has attracted much attention in the exploration of novel therapeutic methodologies. As an emerging material of self-assembled porous structure, metal-organic frameworks (MOFs) have high expectations because of their special properties compared to traditional porous materials. Therefore, integration of MOFs and functional materials is leading to the creation of new multifunctional composites/hybrids. Photothermal therapy (PTT), using near-IR (NIR) laser-absorbing nanomaterials as PTT agents, has shown encouraging therapeutic effects to photothermally ablate tumors. However, the most of widely used PTT agents are inorganic materials and nonbiodegradable. Herein, uniform polypyrrole (PPy) nanoparticles (NPs) with good biodegradability were synthesized by a microemulsion method. The PPy NPs were further coated with the mesoporous iron-based MOF structure MIL-100 by interaction between PPy NPs and MIL-100 precursors at room temperature. As a multifunctional nanoplatform, an anticancer drug could easily be loaded into the mesopores of the MIL-100 shell. The PPy core, as an organic photothermal agent, is able to photothermally ablate cancer cells and improve the efficacy of chemotherapy under NIR irradiation. The composites showed an outstanding in vivo synergistic anticancer capacity. Our work could encourage further study in the construction of a synergetic system using MOFs and organic PTT agents.

Effect of overexpression of HOX genes on its invasive tendency in cerebral glioma.

Transcription factors encoded by HOX genes are vital in the determination of cell fate and identity during embryonic development. In certain malignancies, HOX genes also behave as oncogenes. The present study demonstrated suppression of the invasive tendency of glioblastoma multiforme U-118 and U-138 cells by the introduction of the antisense fragments of HOXA6 and B13 genes using electroporation. The invasion index indicated 79 and 72% reductions in the invasive ability of antisense HOXA6 and B13, respectively. No significant differences in the invasive index of the parental and mock cells of each HOX gene were observed (invasive index, 0.75-0.91; P=0.05). A reduction in invasion tendency was also observed following betulinic acid (BA) treatment: The results from the matrigel assay analysis clearly demonstrated a significant inhibition in the invasive behaviour of U-118 and U-138 cell lines from day 15 following BA treatment, with a maximum effect on day 30. The invasion index demonstrated 62 and 65% reductions in invasion ability in the U-118 and U-138 cell lines, respectively. The suppression of HOXC6 and B13 expression by the introduction of the corresponding antisense fragments in addition to BA reduced invasion tendency in U-118 and U-138 cell lines. The mechanism underlying the association between the HOX gene and invasive behavior in glioma cells is yet to be understood. However, the anti-invasive behavior of BA may aid understanding of the mechanism in future studies.

Honokiol induces cell cycle arrest and apoptosis via p53 activation in H4 human neuroglioma cells.

OBJECTIVE: To investigate the signal pathway of honokiol-induced apoptosis in H4 human neuroglioma cells and to evaluate whether p53 signaling and cell cycle arrest were involved in honokiol-treated H4 human neuroglioma cells. METHODS: The cell viability was detected by the CCK8 assay. The cell apoptosis was assessed by annexin V-PI double-labeling staining and hoechst 33342 staining. The protein expression of cell cycle regulators and tumor suppressors were analyzed by western blotting. RESULTS: Treatment of H4 human neuroglioma cells with honokiol induced cell death in a dose-and time-dependent manner by using CCK8 assay. Consistent with the CCK8 assay, the flow cytometry results showed that the proportion of the apoptosis cells increased after honokiol when compared with untreated group. Moreover, H4 human neuroglioma cells exposed to honokiol, resulted in an accumulation of cells in S and G2/M phase. Apoptotic bodies were clearly observed in human neuroglioma cells when treated with honokiol and then stained with Hoechst 33342. The expression of Cyclin B1, CDC2 and cdc25C were downregulated, however, the expression of p-CDC2 and p-cdc25c was significantly upregulated when the neuroglioma cells were exposed to honokiol. Moreover, p53, p21 and Bax/Bcl-2 were significantly upregulated by honokiol treatment. CONCLUSIONS: These results confirmed that honokiol could induce apoptosis in human neuroglioma cells, the underlying molecular mechanisms, at least partially, through activation p53 signaling and induction of cell cycle arrest.

Ethyl acetate extracts of Fructus Ligustri Lucide induce cell apoptosis in human neuroglioma cell.

OBJECTIVE: Previous studies have shown that Fructus Ligustri Lucide (FLL) can be used to improve the tumor cells sensitivity to chemotherapeutics and promote cell death. However, the mechanism by which FLL mediate this effect is unclear. In the present study, ethyl acetate extracts of FLL induced cell apoptosis in human neuroglioma cell was investigated. METHODS: The cell viability was detected by the CCK8 assay. The cell apoptosis was assessed by annexin V-PI double-labeling staining and hoechst 33342 staining. The protein expression of cell cycle regulators and tumor suppressors were analyzed by western blotting. RESULTS: Treatment of human neuroglioma cell with FLL induced cell death in a dose-and time-dependent manner by using CCK8 assay. Consistent with the CCK8 assay, the flow cytometry results showed that the proportion of the early and terminal phase of apoptosis cells had gained after FLL treatment as compared to untreatment group. Moreover, human neuroglioma cells were exposed to the ethyl acetate extracts of FLL for 48 h, which resulted in an accumulation of cells in G2/Mphase. Apoptotic bodies were clearly observed in human neuroglioma cells that had been treated with FLL for 48 h and then stained with Hochest 33342. The expression of Cyclin B1, CDC2 and cdc25C were downregulated upon FLL treatment in human neuroglioma cells. The expression level of Cyclin B1, CDC2 and cdc25C was negatively correlated with the time of treatment by FLL. In contrast, p53, p21 and p16 were obviously upregulated by FLL treatment in a time-dependent manner. CONCLUSIONS: These results confirmed that FLL could induce apoptosis in human neuroglioma cells, the underlying molecular mechanisms, at least partially, through activation p21/p53 and suppression CDC2/cdc25C signaling in vitro.

Computer simulation of biomolecule-biomaterial interactions at surfaces and interfaces.

Biomaterial surfaces and interfaces are intrinsically complicated systems because they involve biomolecules, implanted biomaterials, and complex biological environments. It is difficult to understand the interaction mechanism between biomaterials and biomolecules through conventional experimental methods. Computer simulation is an effective way to study the interaction mechanism at the atomic and molecular levels. In this review, we summarized the recent studies on the interaction behaviors of biomolecules with three types of the most widely used biomaterials: hydroxyapatite (HA), titanium oxide (TiO2), and graphene(G)/graphene oxide(GO). The effects of crystal forms, crystallographic planes, surface defects, doping atoms, and water environments on biomolecules adsorption are discussed in detail. This review provides valuable theoretical guidance for biomaterial designing and surface modification.

Synthesis of hollow hydroxyapatite nanospheres by the control of nucleation and growth in a two phase system.

Hollow hydroxyapatite nanospheres were prepared by a two-phase approach by controlling nucleation and crystal growth processes. The cavities of hollow HA provide potential applications as new kinds of containers for carrying, filling in, or encapsulating other materials, thus constructing a multifunctional system with good biocompatibility.

Icariin promotes extracellular matrix synthesis and gene expression of chondrocytes in vitro.

To effectively treat articular cartilage defect with tissue engineering there is an urgent need to develop safe and cheap drugs that can substitute or cooperate with growth factors for chondrogenesis promotion. Here, we demonstrate the chondrogenic effect of icariin, the major pharmacological active constituent of Herb Epimedium (HEP). Rabbit chondrocytes were isolated from articular cartilage and cultured in vitro with different concentrations of icariin. Icariin at concentrations under 1 × 10⁻5 M showed low cytotoxicity toward chondrocytes, but icariin at 5 × 10⁻5 M inhibited the proliferation of chondrocytes. Icariin hardly affected the cell morphology with concentrations ranging from 1 × 10⁻7 M to 5 × 10⁻5 M. However, the higher concentration of icariin produced more extracellular matrix (ECM) synthesis and expression of chondrogenesis genes of chondrocytes. Indeed, the promotion of icariin on the synthesis of glycosaminoglycans (GAGs) and collagen of chondrocytes, and finally exerting a potent chondrogenic effect, might be due to its ability to up-regulate the expression of aggrecan, collagen II and Sox9 genes and to down-regulate the expression of the collagen I gene of chondrocytes. These preliminary results imply that icariin might be an effective accelerant for chondrogenesis and that icariin-loaded biomaterials might have the potential for cartilage tissue engineering. 1 × 10⁻5 M may be a suitable concentration of icariin with chondrogenic effect for tissue engineering.

Osteoinduction by Ca-P biomaterials implanted into the muscles of mice.

The osteoinduction of porous biphasic calcium phosphate ceramics (BCP) has been widely reported and documented, but little research has been performed on rodent animals, e.g., mice. In this study, we report osteoinduction in a mouse model. Thirty mice were divided into two groups. BCP materials (Sample A) and control ceramics (Sample B) were implanted into the leg muscle, respectively. Five mice in each group were killed at 15, 30, and 45 d after surgery. Sample A and Sample B were harvested and used for hematoxylin and eosin (HE) staining, immunohistochemistry (IHC) staining, and Alizarin Red S staining to check bone formation in the biomaterials. Histological analysis showed that no bone tissue was formed 15 d after implantation (0/5) in either of the two groups. Newly-formed bone tissues were observed in Sample A at 30 d (5/5) and 45 d (5/5) after implantation; the average amounts of newly-formed bone tissues were approximately 5.2% and 8.6%, respectively. However, we did not see any bone tissue in Sample B until 45 d after implantation. Bone-related molecular makers such as bone morphogenesis protein-2 (BMP-2), collagen type I, and osteopontin were detected by IHC staining in Sample A 30 d after implantation. In addition, the newly-formed bone was also confirmed by Alizarin Red S staining. Because this is the report of osteoinduction in the rodent animal on which all the biotechnologies were available, our results may contribute to further mechanism research.

Tungsten carbide-cobalt particles activate Nrf2 and its downstream target genes in JB6 cells possibly by ROS generation.

Hard metal consisting of a mixture of tungsten carbide (WC) and metallic cobalt (Co) was evaluated as a possible carcinogen in humans by IARC in 2003. Studies have suggested that nuclear factor erythroid 2-related factor 2 (Nrf2) constitutes one of the chemical-sensing and transcription systems that play an essential role(s) in chemical toxicity, carcinogenesis, and pathological processes. To elucidate the mechanisms of health hazards of WC-Co, effects of nano-WC-Co particles on Nrf2 signaling pathway were investigated in the present study in a JB6 cell line. After a 5 h treatment with nano-WC-Co particles, Nrf2 was released from Keap1 in the cytoplasm and translocated into the nucleus. Enzymatic activities of Nrf2 target genes, including glutathione S-transferase (GST) and NAD(P)H:quinone oxidoreductase 1 (NQO1), increased at 24 and 48 h after the treatment. Studies using reactive oxygen species (ROS) sensitive dyes indicated that ROS were produced in nano-WC-Co particle-treated cells. Pretreatment of the cells with catalase, but not sodium formate, resulted in a significant inhibitory effect on nano-WC-Co particle-induced Nrf2 target gene activation. These findings suggest that activation of Nrf2 and its downstream genes may be initiated by ROS generation, and ROS may act as a major contributor in nano-WC-Co particle-induced adverse health effects.

Mercaptobenzothiazole allergenicity-role of the thiol group.

The rubber accelerator, 2-mercaptobenzothiazole (MBT), is known to cause allergic contact dermatitis (ACD), but the mechanism is unknown. The role of the thiol group in MBT's allergenicity was investigated in the present study. Guinea pigs were sensitized to MBT using a modified guinea pig maximization test (GPMT) and reactivity was assessed toward 2-mercaptobenzothiazole disulfide (MBTS), 2-hydroxybenzothiazole (HBT; thiol-substituted), 2-(methylthio)benzothiazole (MTBT; thiol-blocked), and benzothiazole (BT; thiol-lacking). MBT and MBTS, but not BT, HBT, or MTBT, elicited ACD in MBT-sensitized animals, demonstrating that the thiol group is critical to MBT's allergenicity. In addition, both MBT and MBTS were shown to inhibit both glutathione reductase and thioredoxin reductase, and thus contribute to the stability of MBT-protein mixed disulfides. It is concluded that the probable haptenation mechanism of MBT is through initial oxidation to MBTS with subsequent reduction to form mixed disulfides with proteins.

The zinc-binding motif of human RECQ5beta suppresses the intrinsic strand-annealing activity of its DExH helicase domain and is essential for the helicase activity of the enzyme.

RecQ family helicases, functioning as caretakers of genomic integrity, contain a zinc-binding motif which is highly conserved among these helicases, but does not have a substantial structural similarity with any other known zinc-finger folds. In the present study, we show that a truncated variant of the human RECQ5beta helicase comprised of the conserved helicase domain only, a splice variant named RECQ5alpha, possesses neither ATPase nor DNA-unwinding activities, but surprisingly displays a strong strand-annealing activity. In contrast, fragments of RECQ5beta including the intact zinc-binding motif, which is located immediately downstream of the helicase domain, exhibit much reduced strand-annealing activity but are proficient in DNA unwinding. Quantitative measurements indicate that the regulatory role of the zinc-binding motif is achieved by enhancing the DNA-binding affinity of the enzyme. The novel intramolecular modulation of RECQ5beta catalytic activity mediated by the zinc-binding motif may represent a universal regulation mode for all RecQ family helicases.

Evidence for a functional dimeric form of the PcrA helicase in DNA unwinding.

PcrA helicase, a member of the superfamily 1, is an essential enzyme in many bacteria. The first crystal structures of helicases were obtained with PcrA. Based on structural and biochemical studies, it was proposed and then generally believed that PcrA is a monomeric helicase that unwinds DNA by an inchworm mechanism. But a functional state of PcrA from unwinding kinetics studies has been lacking. In this work, we studied the kinetic mechanism of PcrA-catalysed DNA unwinding with fluorometric stopped-flow method under both single- and multiple-turnover conditions. It was found that the PcrA-catalysed DNA unwinding depended strongly on the PcrA concentration as well as on the 3'-ssDNA tail length of the substrate, indicating that an oligomerization was indispensable for efficient unwinding. Study of the effect of ATP concentration on the unwinding rate gave a Hill coefficient of approximately 2, suggesting strongly that PcrA functions as a dimer. It was further determined that PcrA unwound DNA with a step size of 4 bp and a rate of approximately 9 steps per second. Surprisingly, it was observed that PcrA unwound 12-bp duplex substrates much less efficiently than 16-bp ones, highlighting the importance of protein-DNA duplex interaction in the helicase activity. From the present studies, it is concluded that PcrA is a dimeric helicase with a low processivity in vitro. Implications of the experimental results for the DNA unwinding mechanism of PcrA are discussed.

Structural and functional analyses of disease-causing missense mutations in Bloom syndrome protein.

Bloom syndrome (BS) is an autosomal recessive disorder characterized by genomic instability and the early development of many types of cancer. Missense mutations have been identified in the BLM gene (encoding a RecQ helicase) in affected individuals, but the molecular mechanism and the structural basis of the effects of these mutations remain to be elucidated. We analysed five disease-causing missense mutations that are localized in the BLM helicase core region: Q672R, I841T, C878R, G891E and C901Y. The disease-causing mutants had low ATPase and helicase activities but their ATP binding abilities were normal, except for Q672, whose ATP binding activity was lower than that of the intact BLM helicase. Mutants C878R, mapping near motif IV, and G891E and C901Y, mapping in motif IV, displayed severe DNA-binding defects. We used molecular modelling to analyse these mutations. Our work provides insights into the molecular basis of BLM pathology, and reveals structural elements implicated in coupling DNA binding to ATP hydrolysis and DNA unwinding. Our findings will help to explain the mechanism underlying BLM catalysis and interpreting new BLM causing mutations identified in the future.

Airway responses in Brown Norway rats following inhalation sensitization and challenge with trimellitic anhydride.

Trimellitic anhydride (TMA) is a cause of asthma in man. Dose-dependent TMA-specific IgE, histopathology, and airway responses after sensitization by inhalation were examined in the Brown Norway rat. Rats were exposed to 0.04, 0.4, 4, or 40 mg/m3 TMA aerosol for 10 min, once a week, over 10 weeks. All lower exposures were, subsequently, rechallenged to 40 mg/m3 TMA aerosol. All rats received a sham exposure 1 week prior to the first TMA exposure. Following the sham exposure and weekly after each TMA exposure, TMA-specific IgE and both early-phase airway response (EAR) and late-phase airway response (LAR) were measured using enhanced pause (Penh). All rats sensitized by 40 mg/m3 TMA developed specific IgE, EAR, and LAR to one or more of the challenges to 40 mg/m3 TMA. TMA of 4 mg/m3 induced a much lower, but stable, specific IgE response. EAR and LAR were observed only after a 40 mg/m3 TMA rechallenge in this group, but it was much larger than that observed in the 40 mg/m3 TMA-sensitized and challenged group. Exposure-dependent histopathological changes noted included eosinophilic granulomatous interstitial pneumonia, perivascular eosinophil infiltrates, bronchial-associated lymphoid tissue hyperplasia, and peribronchiolar plasma cell infiltrates.

Escherichia coli RecQ is a rapid, efficient, and monomeric helicase.

RecQ family helicases play a key role in chromosome maintenance. Despite extensive biochemical, biophysical, and structural studies, the mechanism by which helicase unwinds double-stranded DNA remains to be elucidated. Using a wide array of biochemical and biophysical approaches, we have previously shown that the Escherichia coli RecQ helicase functions as a monomer. In this study, we have further characterized the kinetic mechanism of the RecQ-catalyzed unwinding of duplex DNA using the fluorometric stopped-flow method based on fluorescence resonance energy transfer. Our results show that RecQ helicase binds preferentially to 3'-flanking duplex DNA. Under the pre-steady-state conditions, the burst amplitude reveals a 1:1 ratio between RecQ and DNA substrate, suggesting that an active monomeric form of RecQ helicase is involved in the catalysis. Under the single-turnover conditions, the RecQ-catalyzed unwinding is independent of the 3'-tail length, indicating that functional interactions between RecQ molecules are not implicated in the DNA unwinding. It was further determined that RecQ unwinds DNA rapidly with a step size of 4 bp and a rate of approximately 21 steps/s. These kinetic results not only further support our previous conclusion that E. coli RecQ functions as a monomer but also suggest that some of the Superfamily 2 helicases may function through an "inchworm" mechanism.

RecQ helicase-catalyzed DNA unwinding detected by fluorescence resonance energy transfer.

A fluorometric assay was used to study the DNA unwinding kinetics induced by Escherichia coli RecQ helicase. This assay was based on fluorescence resonance energy transfer and carried out on stopped-flow, in which DNA unwinding was monitored by fluorescence emission enhancement of fluorescein resulting from helicase-catalyzed DNA unwinding. By this method, we determined the DNA unwinding rate of RecQ at different enzyme concentrations. We also studied the dependences of DNA unwinding magnitude and rate on magnesium ion concentration. We showed that this method could be used to determine the polarity of DNA unwinding. This assay should greatly facilitate further study of the mechanism for RecQ-catalyzed DNA unwinding.

Exposure of brown Norway rats to diesel exhaust particles prior to ovalbumin (OVA) sensitization elicits IgE adjuvant activity but attenuates OVA-induced airway inflammation.

Exposure to diesel exhaust particles (DEP) during the sensitization process has been shown to increase antigen-specific IgE production and aggravate allergic airway inflammation in human and animal models. In this study, we evaluated the effect of short-term DEP exposure on ovalbumin (OVA)-mediated responses using a post-sensitization model. Brown Norway rats were first exposed to filtered air or DEP (20.6 +/- 2.7 mg/m3) for 4 h/day for five consecutive days. One day after the final air or DEP exposure (day 1), rats were sensitized with aerosolized OVA (40.5 +/- 6.3 mg/m3), and then again on days 8 and 15, challenged with OVA on day 29, and sacrificed on days 9 or 30, 24 h after the second OVA exposure or the final OVA challenge, respectively. Control animals received aerosolized saline instead of OVA. DEP were shown to elicit an adjuvant effect on the production of antigen-specific IgE and IgG on day 30. At both time points, no significant airway inflammatory responses and lung injury were found for DEP exposure alone. However, the OVA-induced inflammatory cell infiltration, acellular lactate dehydrogenase activity and albumin content in bronchoalveolar lavage (BAL) fluid, and numbers of T cells and their CD4+ and CD8+ subsets in lung-draining lymph nodes were markedly reduced by DEP on day 30 compared with the air-plus-OVA exposure group. The OVA-induced nitric oxide (NO) in the BAL fluid and production of NO, interleukin (IL)-10, and IL-12 by alveolar macrophages (AM) were also significantly lowered by DEP on day 30 as well as day 9. DEP or OVA alone decreased intracellular glutathione (GSH) in AM and lymphocytes on days 9 and 30. The combined DEP and OVA exposure resulted in further depletion of GSH in both cell types. These results show that short-term DEP exposure prior to sensitization had a delayed effect on enhancement of the sensitization in terms of allergen-specific IgE and IgG production, but caused an attenuation of the allergen-induced airway inflammatory responses.

[The study on three-dimension finite element analysis of the stress distribution in the mandible bone around dental implants].

OBJECTIVE: The aim of this study was to investigate how to model an accuracy 3-dimension Finite Element Analysis (3D-FEA) model. METHODS: Based on computed tomography (CT) scan data of a woman, a 3D finite element model of the first molar on the left was rebuilt by computer imagines process and computer aided design (CAD). Analysis of the stress distribution on a cylinder dental implant and in the bone around it was conducted. RESULTS: The stress distribution showed extremely asymmetry in bucco-lingual section: stress concentrated on the lingual side of the mandible; stress mainly was tensile in buccal side, and on the contrary compressive in lingual side. CONCLUSION: The results were more reliable because this model more really displayed the mandible.

Ionic effect on combing of single DNA molecules and observation of their force-induced melting by fluorescence microscopy.

Molecular combing is a powerful and simple method for aligning DNA molecules onto a surface. Using this technique combined with fluorescence microscopy, we observed that the length of lambda-DNA molecules was extended to about 1.6 times their contour length (unextended length, 16.2 microm) by the combing method on hydrophobic polymethylmetacrylate coated surfaces. The effects of sodium and magnesium ions and pH of the DNA solution were investigated. Interestingly, we observed force-induced melting of single DNA molecules.