In silico genome-wide analysis of homeodomain-leucine zipper transcription factors in Cannabis sativa L.

HD-Zip (Homeodomain-Leucine Zipper) is a family of transcription factors unique to higher plants and plays a vital role in plant growth and development. Increasing research results show that HD-Zip transcription factors are widely involved in many life processes in plants. However, the HD-Zip transcription factor for cannabis, a valuable crop, has not yet been identified. The sequence characteristics, chromosome localization, system evolution, conservative motif, gene structure, and gene expression of the HD-Zip transcription factor in the cannabis genome were systematically studied. Real-time quantitative polymerase chain reaction (qRT-PCR) was used to verify its function. The results showed that cannabis contained 33 HD-Zip gene members. The number of amino acids is 136-849aa, the isoelectric point is 4.54-9.04, and the molecular weight is 23264.32-93147.87Da. Many cis-acting elements are corresponding to hormone and abiotic stress in the HD-Zip family promoter area of cannabis. Sequencing of the transcriptome at 5 tissue sites of hemp, stems, leaves, bracts, and seeds showed similar levels of expression of 33 members of the HD-Zip gene family at 5 tissue sites. Bioinformatics results show that HD-Zip expression is tissue-specific and may be influenced by hormones and environmental factors. This lays a foundation for further research on the gene function of HD-Zip.

Influence of Light Conditions on the Antibacterial Performance and Mechanism of Waterborne Fluorescent Coatings Based on Waterproof Long Afterglow Phosphors/PDMS Composites.

Marine microbial adhesion is the fundamental cause of large-scale biological fouling. Low surface energy coatings can prevent marine installations from biofouling; nevertheless, their static antifouling abilities are limited in the absence of shear forces produced by seawater. Novel waterborne antifouling coatings inspired by fluorescent coral were reported in this paper. Waterproof long afterglow phosphors (WLAP) were introduced into waterborne silicone elastomers by the physical blending method. The composite coatings store energy during the day, and the various colors of light emitted at night affect the regular physiological activities of marine bacteria. Due to the synergistic effect of fouling-release and fluorescence antifouling, the WLAP/polydimethylsiloxane (PDMS) composite coating showed excellent antifouling abilities. The antibacterial performance of coatings was tested under simulated day-night alternation, continuous light, and constant dark conditions, respectively. The results illustrated that the antibacterial performance of composite coatings under simulated day-night alternation conditions was significantly better than that under continuous light or darkness. The weak lights emitted by the coating can effectively inhibit the adhesion of bacteria. C-SB/PDMS showed the best antibacterial effect, with a bacterial adhesion rate (BAR) of only 3.7%. Constant strong light also affects the normal physiological behavior of bacteria, and the weak light of coatings was covered. The antibacterial ability of coatings primarily relied on their surface properties under continuous dark conditions. The fluorescent effect played a vital role in the synergetic antifouling mechanism. This study enhanced the static antifouling abilities of coatings and provided a new direction for environmentally friendly and long-acting marine antifouling coatings.

A review of the botany, phytochemistry, traditional uses, pharmacology, toxicology, and quality control of the Astragalus memeranaceus.

Astragali Radix (Huangqi) is mainly distributed in the Northern Hemisphere, South America, and Africa and rarely in North America and Oceania. It has long been used as an ethnomedicine in the Russian Federation, Mongolia, Korea, Kazakhstan, and China. It was first recorded in the Shennong Ben Cao Jing and includes the effects of reinforcing healthy qi, dispelling pathogenic factors, promoting diuresis, reducing swelling, activating blood circulation, and dredging collaterals. This review systematically summarizes the botanical characteristics, phytochemistry, traditional uses, pharmacology, and toxicology of Astragalus to explore the potential of Huangqi and expand its applications. Data were obtained from databases such as PubMed, CNKI, Wan Fang Data, Baidu Scholar, and Google Scholar. The collected material also includes classic works of Chinese herbal medicine, Chinese Pharmacopoeia, Chinese Medicine Dictionary, and PhD and Master's theses. The pharmacological effects of the isoflavone fraction in Huangqi have been studied extensively; The pharmacological effects of Huangqi isoflavone are mainly reflected in its anti-inflammatory, anti-tumor, anti-oxidant, anti-allergic, and anti-diabetic properties and its ability to treat several related diseases. Additionally, the medicinal uses, chemical composition, pharmacological activity, toxicology, and quality control of Huangqi require further elucidation. Here, we provide a comprehensive review of the botany, phytochemistry, traditional uses, pharmacology, toxicology, and quality control of Astragalus to assist future innovative research and to identify and develop new drugs involving Huangqi.

Anti-marine biofouling adhesion performance and mechanism of PDMS fouling-release coating containing PS-PEG hydrogel.

Polystyrene microspheres compounded with polyethylene glycol-based hydrogel (PS-PEG)/polydimethylsiloxane (PDMS) coatings were prepared using the physical blending method. The chemical structure, surface and interface properties, interlayer adhesion, and tensile properties were tested in this paper. Furthermore, the antifouling performance was evaluated through bovine serum albumin fluorescent protein adsorption testing, marine bacteria adhesion testing, and benthic diatom adhesion testing. The results showed that the coating performance was best when 20 wt% PS-PEG hydrogel was added. Its surface energy was only 19.21 mJ/m2, the maximum breaking strength was 1.24 MPa, the maximum elongation rate was 675 %, the elastic modulus was 2.53 MPa, and the anti-stripping rate was 100 %. In addition, the coating with added 20 wt% PS-PEG hydrogel bacterial adherence rate was 5.36 % and 2.45 % after rinsing and washing, respectively, and the removal rate was 54.29 %. In the benthic diatom adhesion test, the chlorophyll concentration a-value was only 0.0017 mg/L after washing with added 20 wt% hydrogel, and the protein desorption rate was 84.19 % higher than PDMS in the fluorescent protein adsorption test. This coating has the 'low adhesion' and 'desorption' characteristics in the three growth stages of biofouling. Meanwhile, the low surface energy of the silicone is stable, and the hydrogel also dynamically migrates to the surface to gradually form a hydration layer, both are synergistic. When 20 wt% PS-PEG hydrogel was added, the coating demonstrated excellent antifouling performance due to its high hydration layer, low surface energy, high elasticity, and high interlayer adhesion. This research is expected to contribute to the practical applications of hydrogel coatings in marine antifouling.

The Effect of Conductive Polyaniline on the Anti-Fouling and Electromagnetic Properties of Polydimethylsiloxane Coatings.

In this paper, four conductive polyaniline powders doped in hydrochloric acid, sulfuric acid, phosphoric acid, and sulfonic acid were selected and blended with polydimethylsiloxane to prepare coatings with an electromagnetic absorption effect and fouling desorption effect, respectively. A UV spectrophotometer was used to evaluate the settling rate of the powders. Fourier transform infrared spectrometry, laser confocal microscopy, and scanning electron microscopy were used to observe the morphology and structure of the powder and the coating. The interface properties of the coatings were characterized using a contact angle measurement, the mechanical properties of the coatings using a tensile test, and the electromagnetic properties of the powders and microwave absorption properties of the coatings using vector network analyzers. Meanwhile, the antifouling performance of the coatings was evaluated via the marine bacteria adhesion test and benthic diatom adhesion test, and the effect of conductive polyaniline on the antifouling performance of the coating was analyzed. The results show that adding polyaniline reduced the surface energy of the coating and increased the roughness, mechanical properties and anti-fouling properties of the coating. Moreover, adding appropriate polyaniline powder can enhance the electromagnetic wave loss of the coating. The followings values were recorded for a hydrochloric-acid-doped polyaniline coating: lowest surface energy of 17.17 mJ/m2, maximum fracture strength of 0.95 MPa, maximum elongation of 155%, maximum bandwidth of 3.81 GHz, and peak of reflection loss of -23.15 dB. The bacterial detachment rate of the polydimethylsiloxane (PDMS) samples was only 30.37%. The bacterial adhesion rates of the composite coating containing hydrochloric-acid-doped polyaniline were 4.95% and 2.72% after rinsing and washing, respectively, and the desorption rate was 45.35%. The chlorophyll concentration values were 0.0057 mg/L and 0.0028 mg/L, respectively, and the desorption rate was 54.62%.

The complete chloroplast genome of Aegle marmelos and its phylogenetic analysis.

Aegle marmelos (L.) Correa 1800, a plant belonging to the Rutaceae family, is extensively used in Tibetan medicine. We employed Illumina HiSeq reads to assemble the complete chloroplast (cp) genome of A. marmelos, which spans 144,538 bp. The genome comprises 114 genes, including 75 protein-coding genes, 31 tRNA genes, and 8 rRNA genes. It is characterized by four regions: The large single-copy (LSC) region (74,253 bp), the inverted repeat A (IRa) region (26,015 bp), the small single-copy (SSC) region (18,255 bp), and the inverted repeat B (IRb) region (26,015 bp). Phylogenomic analysis demonstrated a close relationship between A. marmelos and Citrus. The assembly of The cp genome in this study serves as a foundation for conservation efforts and phylogenetic investigations of A. marmelos, paving the way for future experimentation.

Genome-wide identification of the NAC transcription factors family and regulation of metabolites under salt stress in Isatis indigotica.

NAC (NAM, ATAF1/2 and CUC2) transcription factors (TFs) are a class of TFs families unique to plants, which not only play an important role in the growth and developmental stages of plants but also function in response to stress and regulation of secondary metabolite biosynthesis. However, there are few studies on NAC genes in the medicinal plant Isatis indigotica. In this study, 96 IiNAC genes were identified based on the whole-genome data of I. indigotica, distributed in seven chromosomes and three contigs. IiNAC genes were structurally conserved and divided into 15 subgroups. Cis-elements were identified in the promoter region of the IiNAC gene in response to plant growth and development, abiotic stresses and hormones. In addition, transcriptome and metabolome data of I. indigotica leaves under salt stress were analyzed to construct a network of IiNAC gene co-expression and metabolite association. Ten differentially expressed IiNAC genes were co-expressed with 109 TFs, and Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analyses revealed that most of these genes were associated with plant growth and development and abiotic stress responses. Eleven IiNAC genes were positively associated with 72 metabolites. Eleven IiNAC genes were positively or negatively associated with 47 metabolites through 37 TFs. Commonly associated secondary metabolites include two terpenoids, abscisic acid and bilobalide, two flavonoids, dihydrokaempferol and syringaldehyde, a coumarin, 7-methoxycoumarin, an alkaloid, lupinine, and quinone dihydrotanshinone I. This study provides important data to support the identification of the NAC gene family in I. indigotica and the regulatory functions of IiNAC genes in metabolites under salt stress.

Genome-wide identification and expression profiling analysis of the trihelix gene family and response of PgGT1 under abiotic stresses in Platycodon grandiflorus.

The trihelix gene family plays an important role in plant growth and abiotic stress responses. Through the analysis of genomic and transcriptome data, 35 trihelix family members were identified for the first time in Platycodon grandiflorus; they were classified into five subfamilies: GT-1, GT-2, SH4, GTγ, and SIP1. The gene structure, conserved motifs and evolutionary relationships were analyzed. Prediction of physicochemical properties of the 35 trihelix proteins founded, the number of amino acid molecules is between 93 and 960, theoretical isoelectric point is between 4.24 and 9.94, molecular weight is between 9829.77 and 107435.38, 4 proteins among them were stable, and all GRAVY is negative. The full-length cDNA sequence of the PgGT1 gene of the GT-1 subfamily was cloned by PCR. It is a 1165 bp ORF encoding a 387 amino acid protein, with a molecular weight of 43.54 kDa. The predicted subcellular localization of the protein in the nucleus was experimentally verified. After being treated with NaCl, PEG6000, MeJA, ABA, IAA, SA, and ethephon, the expression of PgGT1 gene showed an up-regulated trend except for the roots treated with NaCl and ABA. This study laid a bioinformatics foundation for the research of trihelix gene family and the cultivation of excellent germplasm of P. grandiflorus.

In Silico Genome-Wide Analysis of B3 Transcription Factors in Cannabis sativa L.

Introduction: The B3 transcription factor has been identified in Arabidopsis thaliana, Oryza sativa, and Solanum lycopersicum, among other species. This family of transcription factors regulates seed growth, development, and stress. Cannabis is a valuable crop with numerous applications; however, no B3 transcription factors have been identified in this plant. Materials and Methods: The cannabis B3 gene family was identified and analyzed using bioinformatics analysis tools, such as the NCBI database, plantTFDB website, TBtools, and MEGA software. Quantitative real-time polymerase chain reaction (qRT-PCR) experiments were used to confirm its function. Results: The cannabis B3 family contains 65 members spread across 10 chromosomes. The isoelectric point ranged from 10.03 to 4.65, and the molecular weight ranged from 99,542.88 to 14,310.9 Da. Most of the members were found in the nucleus. The upstream promoter region of the gene contains a variety of cis-acting elements related to the stress response. RNA-seq data and qRT-PCR results showed that CsB3 genes were expressed differently in five organs of female Diku plants and in glandular hairs of nine distinct types of female cannabis inflorescences. Collinearity analysis revealed that there were more homologous genes between cannabis and dicotyledons than monocotyledonous plants, which was consistent with the evolutionary relationship. Conclusions: Hormones and external environmental factors might influence CsB3 expression. Furthermore, some genes such as CsB3-02, CsB3-07, CsB3-50, CsB3-62, and CsB3-65 may participate in cannabis growth and development and play a role in secondary metabolite synthesis. This study provides a solid foundation for further research into the gene function of the cannabis B3 family.

Effect of Microwave-Assisted Curing on Properties of Waterborne Silicone Antifouling Coatings.

Waterborne silicone coatings are prepared in this paper by using silicone emulsion as a film-forming material, γ-methacryloxypropyltrimethoxysilane, and dibutyltin dilaurate as a curing agent and a catalyst, respectively. The corresponding coatings are obtained by controlling different microwave times to accelerate the coating curing. The surface morphology, roughness, surface properties, mechanical properties, and antifouling properties of the coating are studied by laser confocal microscope, contact angle measurement, tensile test, marine bacterial attachment test, and benthic diatom adhesion test. Additionally, the action mechanism of microwaves in the curing process of the coatings is also discussed. The results show that the microwave can greatly reduce the curing time of waterborne silicone coating. It can improve the painting efficiency, the surface roughness of the coating, and the mechanical properties of the coatings. The change in roughness increases the contact angle of the coating, reduces the apparent surface energy, and then improves the antifouling performance. For the coating cured by microwave, with the increase in microwave curing time, the water and diiodomethane contact angles of the coating gradually increase, and the surface energy gradually decreases from about 20 mJ/m2 to 10.8 mJ/m2. With the increase in microwave time, the attachment amount of Navicular Tenera gradually decreases, the removal rate gradually increases, and the removal rate of Navicular Tenera in the coating increases from 15.36% to 31.78%. The bacterial removal rate of the coating can be increases from 11.05% to 22.28% after microwave curing. Microwave-assisted curing is helpful in improving the antifouling and self-cleaning performance of waterborne silicone coatings, showing promising potential applications.

Identification of the bZIP gene family and regulation of metabolites under salt stress in isatis indigotica.

The bZIP transcription factor family plays important roles in plant growth and development, response to stress, and regulation of secondary metabolite biosynthesis. The identification and molecular function of bZIP gene have been deeply studied in the model plant Arabidopsis thaliana, but it has not been reported in the medicinal plant Isatis indigotica. In this study, 65 IibZIP genes were identified in the genome of I. indigotica, which were distributed on seven chromosomes, were highly conserved, could be classified into 11 subgroups. Transcriptomic and metabolomic data for leaves of I. indigotica exposed to salt stress were analyzed to construct an IibZIP gene co-expression network and metabolite correlation network. Seventeen IibZIP genes were co-expressed with 79 transcription factors, and GO and KEGG enrichment analysis showed that most of these genes were associated with abiotic stress and hormone responses of plants. 17 IibZIP genes regulated 110 metabolites through 92 transcription factor associations. In addition, IibZIP23, IibZIP38 and IibZIP51 were associated with six metabolites including three alkaloids (quinoline alkaloid stylopine, indole alkaloids tabersonine and indole-3-acetic acid), flavonoid myricetin 3-O-galactoside, and two primary metabolites 2-hydroxy-6-aminopurine, 3-dehydroshikimic acid were strongly correlated. This study provides data for identification of the IibZIP gene family and their regulation of metabolites in response to salt stress.

SLAP@g-C3N4 Fluorescent Photocatalytic Composite Powders Enhance the Anti-Bacteria Adhesion Performance and Mechanism of Polydimethylsiloxane Coatings.

Fluorescent antifouling and photocatalytic antifouling technologies have shown potential in the field of marine antifouling. SLAP@g-C3N4/PDMS (SLAP@CN/PDMS) composite antifouling coatings were designed and prepared using g-C3N4, sky-blue long afterglow phosphor (SLAP), and polydimethylsiloxane (PDMS). The fluorescence emitted by SLAP under dark conditions was used to excite g-C3N4 for fluorescent photocatalysis and to prolong the photocatalytic activity of g-C3N4. Key data were collected by testing and characterization and are presented in this work. The results showed that g-C3N4 was successfully coated on the SLAP surface and formed a heterogeneous structure. After the composite powder was added to the PDMS coating, the coating maintained low surface energy but enhanced the surface roughness of the coating. The experimental results of degraded Rhodamine B (RhB) showed that SLAP prolonged the g-C3N4 photocatalytic activity time. The anti-marine bacterial adhesion performance of the coating was investigated by bacterial adhesion experiments. The results showed that SLAP@CN could effectively improve the anti-bacterial adhesion performance of PDMS coating, in which the anti-bacterial adhesion performance of SLAP@CN-2.5/PDMS was improved by nearly 19 times. This antifouling coating introduces fluorescent antifouling, photocatalytic antifouling, and fluorescence-driven photocatalytic antifouling based on the low surface energy antifouling of silicones and achieves "all-weather" fluorescent photocatalytic antifouling.

Preparation and Properties of Fluorosilicone Fouling-Release Coatings.

To improve the antifouling performance of silicone fouling-release coatings, some fluorosilicone and silicone fouling-release coatings were prepared and cured at room temperature with hydroxyl-terminated fluoropolysiloxane (FPS) or hydroxy-terminated polydimethylsiloxane (PDMS) as a film-forming resin, tetraethyl orthosilicate (TEOS) as a crosslinking agent, and dibutyltin dilaurate (DBTDL) as a catalyst. The chemical structure, surface morphology and roughness, tensile properties, and antifouling properties of the coating were studied by infrared spectroscopy, a laser confocal scanning microscope, contact angle measurement, tensile tests, and marine bacteria and benthic diatom attachment tests. The results showed that the FPS coatings were not only hydrophobic but also oleophobic, and the contact angles of the FPS coatings were larger than those of the PDMS coatings. The surface free energies of the FPS coatings were much lower than those of the PDMS coatings. Generally, the fluorine groups can improve the antifouling performance of the coating. Introducing nonreactive silicone oil into PDMS or FPS coatings can improve the antifouling performance of the coating to a certain extent. The prepared fluorosilicone fouling-release coatings showed good application prospects.

Preparation and Properties of PED-TDI Polyurethane-Modified Silicone Coatings.

To explore the influence mechanisms of polyurethane soft segments on modified silicone coatings, a series of modified coatings was prepared by introducing different contents of hydroxypropyl-terminated polydimethylsiloxane (PDMS2200) into the soft segment of polyurethane. ATR-FTIR, NMR, CLSM, AFM, contact angle measurement, the tensile test, bacterial adhesion, and the benthic diatom adhesion test were used to investigate the structure, morphology, roughness, degree of microphase separation, surface energy, tensile properties, and antifouling properties of the modified coatings. The results show that PDMS2200 could aggravate the microphase separation of the modified coatings, increase the surface-free energy, and reduce its elastic modulus; when the microphase separation exceeded a certain degree, increasing PDMS2200 would decrease the tensile properties. The PED-TDI polyurethane-modified silicone coating prepared with the formula of PU-Si17 had the best tensile properties and antifouling properties among all modified coatings.

Swelling Behaviour of Polystyrene Microsphere Enhanced PEG-Based Hydrogels in Seawater and Evolution Mechanism of Their Three-Dimensional Network Microstructure.

To understand the microstructure evolution of hydrogels swollen in seawater, freeze-drying technology was used to fix and preserve the swollen three-dimensional microstructure. By this method, we revealed the swelling behavior of hydrogels in seawater, and elucidated the mechanism of the swelling process. Meanwhile, we also used Fourier-transform infrared spectroscopy; laser confocal microscopy; field emission scanning electron microscopy, and swelling performance tests to research the structure and properties of PS-PEG hydrogels, before and after seawater swelling, and analyzed the structure and properties of PEG-based hydrogels with different contents of polystyrene microspheres. Results showed that PS-PEG hydrogels went through three stages during the swelling process, namely 'wetting-rapid swelling-swelling equilibrium'. Due to the capillary effect and hydration effect, the surface area would initially grow tiny pores, and enter the interior in a free penetration manner. Finally, it formed a stable structure, and this process varied with different content of polystyrene microspheres. In addition, with the increase of polystyrene microsphere content, the roughness of the hydrogel before swelling would increase, but decrease after swelling. Appropriate acquisition of polystyrene microspheres could enhance the three-dimensional network structure of PEG-based hydrogels, with a lower swelling degree than hydrogels without polystyrene microspheres.

Preparation of g-C3N4/TNTs/CNTs Photocatalytic Composite Powder and Its Enhancement of Antifouling Performance of Polydimethylsiloxane Coatings.

Semiconductor photocatalytic materials have shown potential in the field of antifouling due to their good antibacterial properties, stability, and nontoxic properties. It is an effective way to use them to improve the static antifouling performance of silicone antifouling coatings. g-C3N4/TNTs/CNTs (CNTC) photocatalytic composite powders were prepared and introduced into polydimethylsiloxane (PDMS) coatings to enhance their antifouling performance. Firstly, g-C3N4/TNTs with heterostructure were thermally polymerized by urea and TiO2 nanotubes (TNTs), and then g-C3N4/TNTs and multi-walled carbon nanotubes (CNTs) were composited to obtain CNTC. Finally, CNTC was added into PDMS to prepare g-C3N4/TNTs/CNTs/PDMS (CNTC/P) composite antifouling coating. The results showed that CNTC successfully recombined and formed a heterostructure, and the recombination rate of photogenerated carriers decreased after recombination. The addition of CNTC to PDMS increased the hydrophobicity and roughness while reducing the surface energy (SE) of the coatings. CNTC could effectively improve the anti-attachment performance of PDMS coatings to bacteria and benthic diatom. The bacterial attachment rate (AB) and benthic diatom attachment rate (AD) of CNTC/P-20 were, respectively, 13.1% and 63.1%; they are much lower than that of the coating without photocatalytic composite powder. This coating design provides a new idea for developing new "efficient" and "green" photocatalytic composite antifouling coatings.

The Antifouling and Drag-Reduction Performance of Alumina Reinforced Polydimethylsiloxane Coatings Containing Phenylmethylsilicone Oil.

Fouling-release coatings reinforced with micro-alumina and nano-alumina were prepared based on polydimethylsiloxane (PDMS) containing phenylmethylsilicone oil. The surface properties, mechanical properties, leaching behavior of silicone oil, anti-fouling and drag-reduction performance of the coating were studied. The results show that the addition of alumina can significantly improve the tensile strength, elastic modulus and Shore's hardness of the coating. The adhesion experiments of marine bacteria and Navicula Tenera show that the addition of alumina can reduce the antifouling performance of the coating, which is related to the stripping mode of fouling organisms. The fouling organisms leave the coating surface by shearing, and the energy required for shearing is proportional to the elastic modulus of the coating. At 800-1400 rpm, the addition of alumina will reduce the drag reduction performance of the coating, which is related to the drag reduction mechanism of PDMS. PDMS counteracts part of the resistance by surface deformation. The larger the elastic modulus is, the more difficult the surface deformation is. The experiment of silicone oil leaching shows that the increase of alumina addition amount and the decrease of particle size will inhibit the leaching of silicone oil.

The Interfacial Structure and Adhesion Mechanism of N-(2-Aminoethyl)-3-aminopropyltrimethoxysilane and Epoxy Modified Silicone Tie-Coating to Epoxy Primer.

The matching application of silicone antifouling coating and epoxy primer is a major problem in engineering. Novel epoxy-modified silicone tie-coating was prepared to tie epoxy primer and silicone antifouling coating. Firstly, N-(2-Aminoethyl)-3-aminopropyltrimethoxysilane was mechanically mixed with bisphenol A epoxy resin to form silylated epoxy resin, then the silylated epoxy resin was uniformly mixed with hydroxy-terminated polydimethylsiloxane and a curing agent and catalyst for coating. An infrared spectrometer, differential scanning calorimeter and tensile tests were used to investigate the chemical structure, phase transition temperature and mechanical properties of the tie-coatings. The interlaminar adhesion of the matching coating system was tested and analyzed by a peel-off test and a shear test. Fracture morphology was observed by scanning using an electron microscope. The results showed that crosslinking density of the tie-coating, the elastic modulus and the tensile strength of the coating increased with an increasing epoxy content, but fracture elongation decreased. The shear strength of the matching coating system is 0.37 MPa, and it shows a good tie performance. The maximum anti-peeling rate of the tie-coating on the epoxy primer reaches 100%.

Preparation, Structure, and Properties of Polystyrene-Microsphere-Reinforced PEG-Based Hydrogels.

To improve the mechanical strength and practicability of hydrogels, polystyrene microspheres with core-shell structure were prepared by the soap-free emulsion polymerization, polyethylene glycol hydrogels with polystyrene microspheres by the in-situ polymerization. The structure, morphology, roughness, swelling property, surface energy, and mechanical properties of the microspheres and hydrogels were investigated by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, confocal laser microscopy, swelling test, contact angle measurement, and compression test. The results showed that they have certain swelling capacity and excellent mechanical properties, and can change from hydrophobic to hydrophilic surface. The reason is that the hydrophilic chain segment can migrate, enrich, and form a hydration layer on the surface after soaking for a certain time. Introducing proper content of polystyrene microspheres into the hydrogel, the compressive strength and swelling degree improved obviously. Increasing the content of polystyrene microspheres, the surface energy of the hydrogels decreased gradually.

The Compatibility of Three Silicone Oils with Polydimethylsiloxane and the Microstructure and Properties of Their Composite Coatings.

The compatibility of three types of silicone oil with polydimethylsiloxane, the phase separation of their mixture and the microstructure and properties of their composite coatings were investigated. The existing form of silicone oil in the coating and the precipitation behavior were also studied. The compatibility observed experimentally of the three silicone oils with PDMS is consistent with the results of the thermodynamic calculation. The silicone oil droplet produced by phase separation in the mixture solution can keep its shape in the cured coating, also affecting the microstructure and mechanical properties of the coating. It was found that methyl silicone oil and methyl fluoro silicone oil do not precipitate on the surface, and they have no effect on the surface properties of the coating. In contrast, phenyl silicone oil has obvious effect on the surface, which makes the water contact angle and diiodomethane contact angle of the coating decrease significantly.