Synthesis and adsorption performance of ultra-low silica-to-alumina ratio and hierarchical porous ZSM-5 zeolites prepared from coal gasification fine slag.

Since the human consumption of coal is increasingly growing and coal-based solid wastes are discharged in large quantities, the resource utilization of coal-based solid wastes has been paid more attention. In the present work, for the first time, the coal gasification fine slag is subjected to prepare ZSM-5 zeolites with ultra-low n(SiO2)/n(Al2O3) ratios (less than 20) and hierarchical pore structures. The increase in the concentration of the alkaline extract leads to the decrease of the crystallinity, the irregularity of the microscopic morphology, and the decrease of the specific surface area, resulting in the in-situ generation of mesopores within ZSM-5. Moreover, adsorption experiments demonstrate that ZSM-5-2M exhibits the best methylene blue adsorption performance at the pH of 9 with a removal rate of up to 82.07%, and it also has good adsorption performance in simulated real water samples. Furthermore, the adsorption performance of ZSM-5-2M on the malachite green, Rhodamine B, Congo red, and methyl orange has been investigated and it is found to be very effective for the adsorption of cationic dyes, and its adsorption performance for methylene blue and malachite green is reduced in the presence of anions.

Preparation and application of porous materials from coal gasification slag for wastewater treatment: A review.

In recent years, coal gasification has been gradually promoted as clean technology, and coal gasification slag (CGS) emissions have increased accordingly. CGS, including coarse slag and fine slag, is rich in SiO2 and Al2O3 and has pozzolanic activity, and thus CGS can be regarded as a cheap source of aluminosilicate. Also, CGS, especially the fine slag, usually contains higher contents of residual carbon which has a large specific surface area and low volatility and hence can be considered as a favorable precursor of activated carbon. Benefiting from these characteristics, CGS can be used to prepare high value-added porous materials, such as zeolite, mesoporous silica, carbon-silicon composite, and porous ceramics, and the obtained structures accommodate both sufficient adsorption capacity and low cost. Here, we review the research advances in characteristics of CGS and preparation methods of CGS-based porous materials, as well as their adsorption performance of heavy metal ions, organic dyes, ammonia nitrogen, and other water pollutants. The current studies indicate that CGS-derived adsorbents are effective and economical alternatives for removing aqueous pollutants. In addition, further research prospects on CGS-based porous materials are proposed.

High Correlation Between Structure Development and Chemical Variation During Biofilm Formation by Vibrio parahaemolyticus.

The complex three-dimensional structure of biofilms is supported by extracellular polymeric substances (EPSs) and additional insight on chemical variations in EPS and biofilm structure development will inform strategies for control of biofilms. Vibrio parahaemolyticus VPS36 biofilm development was studied using confocal laser scanning microscopy (CLSM) and Raman spectroscopy (RM). The structural parameters of the biofilm (biovolume, mean thickness, and porosity) were characterized by CLSM and the results showed that VPS36 biofilm formed dense structures after 48 h incubation. There were concurrent variations in carbohydrates and nucleic acids contents in the EPS as evidenced by RM. The Raman intensities of the chemical component in EPS, measured using Pearson's correlation coefficient, were positively correlated with biovolume and mean thickness, and negatively correlated with porosity. The Raman intensity for carbohydrates correlated closely with mean thickness (p-value < 0.01) and the Raman intensity for nucleic acid correlated closely with porosity (p-value < 0.01). Additional evidence for these correlations were confirmed using scanning electron microscopic (SEM) and crystal violet staining.

Bis(oxazoline)-derived N-heterocyclic carbene ligated rare-earth metal complexes: synthesis, structure, and polymerization performance.

Bis(oxazoline)-derived N-heterocyclic carbene (IBiox) supported rare-earth (Sc, Y, Lu) trialkyl complexes have been synthesized and structurally characterized, and their catalytic activity in the (co)polymerization of α-olefins has been studied. The treatment of Ln(CH2SiMe3)3(THF)2 with one equivalent of freshly prepared IBiox afforded the rare-earth metal complexes (IBiox)Ln(CH2SiMe3)3THFn (Ln = Sc (1), n = 0; Y (2), n = 1; and Lu (3), n = 1) in good yields. Single crystal X-ray diffraction study showed that 1 is pseudo tetrahedral, while 2 and 3 are distorted trigonal bipyramidal with coordinated THF. The Ln-C(carbene) bond distances in 1, 2, and 3 are 2.352, 2.550, and 2.479 Å, respectively. DFT calculations were performed to study the bonding scheme and the structural stability. Complex 1 showed a high activity for 1-hexene polymerization by activation with 2 equivalents of [Ph3C][B(C6F5)4], and the resultant polymers are predominantly vinylene end groups (ca. 95%). Moreover, the catalyst system based on 1 proved to be effective for the copolymerization of 1-hexene with 1,7-octadiene, affording the copolymers with about 20% pendant vinyl groups. The hydrophilicity of the copolymers was improved by modifying the vinyl groups with carboxyls via a thiol-ene reaction.

Effects of cigarette smoke condensate on the production and characterization of exopolysaccharides by Bifidobacterium.

The aim of the study was to investigate the effect of cigarette smoke on the production and characterization of exopolysaccharides (EPSs) produced by Bifidobacterium. Cigarettes of Shanhua brand (nicotine: 1.1 mg, tar: 11 mg) were utilized to prepare a cigarette smoke condensate (CSC). The standard strain of Bifidobacterium animalis was cultured in MRS media under anaerobic addition of CSC. The results showed that CSC significantly decreased the growth of B. animalis as well as EPSs and acetic acid production. Furthermore, two EPSs fractions (Fr-I and Fr-II) were isolated and purified for chemical and molecular determination. By comparison with control, CSC was found to be of great impact on EPSs carbohydrate composition. The molecular weight mass of Fr-I changed from 3.33 × 10(5) g/mol (without CSC) to 2.99 × 10(5) (with CSC). In conclusion, in vitro studies revealed that CSC was directly able to affect the production of metabolites for B. animalis, which could be an essential factor in certain pathological disorders.