Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Materials (Basel) ; 13(18)2020 Sep 10.
Artigo em Inglês | MEDLINE | ID: mdl-32927856

RESUMO

High-quality joining of dissimilar alloys between Fe-36Ni alloy and 304L stainless steel is essential in the manufacturing of LNG tanker. In this study, lap joints of Fe-36Ni and 304L dissimilar alloys were fabricated by a pulsed gas tungsten arc welding (P-GTAW) process. The effects of low-frequency pulse on the appearance, microstructure and mechanical properties of the Fe-36Ni/304L lap joints was investigated. With the increase of frequency, the feature sizes of α (the transition angle of the upper surface of Fe-36Ni to the surface of the weld bead) and R (shortest distance between weld root and weld surface) exhibited downtrend and uptrend, respectively, while La (the maximum weld width of lower sheet) and P (the maximum weld penetration of lower sheet) changed in a smaller range. Fusion zone (FZ) is mainly composed of γ phase and M23C6 during solidification, and M23C6 particles are distributed on the grain boundaries of the cells, which reduced the mechanical properties of joint. The average hardness between 110 HV1 and 136 HV1 is lower than that of the base metals. Fractures of all joints located at the Fe-36Ni side near the weld, and a dimple fracture in all samples indicated a ductile fracture. This study found that the heat input values remain 198.86 J mm-1 and increased pulse frequency can improve the maximum tensile force. The average maximum tensile force of the lap weld is 11.95 kN when pulsed frequency is 15 Hz.

2.
SAGE Open Med ; 8: 2050312120931334, 2020.
Artigo em Inglês | MEDLINE | ID: mdl-32587693

RESUMO

OBJECTIVES: We aimed to establish a new reference interval of blood cell parameters by classifying and counting blood Cells of 16- to 85-year-old healthy volunteers and observing continuous changes with age. METHODS: We analyzed the blood cell parameters of 42,678 cases (men, 24,406; women, 18,272), and compared the blood cell parameters of men and women in different age groups using an independent samples t-test. Using limits of 2.5%-97.5%, a 90% confidence interval was used to develop new reference intervals. RESULTS: Counts of blood cell parameters, including white blood Cells, neutrophils, lymphocytes, monocytes, eosinophils, basophils, red blood Cells, hemoglobin, hematocrit, distribution width of red blood Cells and platelets, were found to differ between men and women in different age groups. These parameters were used to establish a new reference interval of blood Cells. CONCLUSION: The blood cell parameters of both men and women changed with increasing age. The reference interval that we established will provide more accurate basic evidence for clinical diagnosis and treatment of diseases.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...